REVIT_ Plan, 3D View & Structural Drawings_Project 2

1ans

From the above given options the type of structure I want to select is Multi unit residential building.

2ans

The geographical and location details of my project are :

1. As mentioned my building comes under residential category and it can be situated in the center of the city.

2. My project is located near the highway.

3. The road width in front of my building is 60'.

4. The height, area and safety measures will follow the rules and regulations of NBC.

3ans

AIM : Using the structural model we have to include the following components based in the project like foundation, beams, columns, roof, floor and stairs.

TOOLS USED :

Architecture.
Structural.
Grids.
Columns.
Shaft.
Stairs.
Foundation.
Beams.
PROCEDURE :

1. First open a architectural tempate in revit and save it as residential building_architecture.

2. Then draw two grid lines and and specift the coordinates as 0'0" for both north-south and east-west.

3. Click on collaborate and Save the project.

4. Next open a new structure template and save it as residential building_structural.

5. Repeat step 2 and 3 and save the project.

6. Create a new architectural template and add the architectural and structural links using manage links option.

7. Select acquired coordinates and set the links to the current link coordinates.

8. Now start drawing the structural components of the project in structural template.

9. Draw horizontal and vertical grid lines.

10. Select Column option from the structural tab and draw the columns at intersection points of the grids.

11. In the same way draw the other structural components like foundation, slabs, beams and save the project to central file.

RESULT :

With the above steps we will be successful in collaborating the architectural and structural template to the central file and design the structural components in the project.

4ans

AIM : With the help of architectural template we have to include the architectural components to the previously created structural model like exterior and interior walls, components and plantiong.
TOOLS USED :
Architecture.
Walls.
Components.
Load family.
Ceiling.
Floor.
Doors.
Windows.
Staircase.
Railings.
PROCEDURE :
1. Now go to the architectural template which was created before.
2. Copy the grids which were created in the previous structure template and copy them.
3. With the help of paste from clipboard option paste the grids in the architectural template.
4. Select the grids and pin them so that they do not get disturbed while doing the project.
5. Now go to elevation and create the levels required from architectural tab.
6. Go to virtual graphics settings and select custom in annotation off the grids.
7. Now with the help of the grid lines start creating the exterior walls of the project.

8. With the help of floor tool add floors to all the levels.

9. With the help of walls tool from the architectural tab add interior partition walls with thickness less than the exterior walls.

10. Add stairs with the help of stairs tool and copy them to all the required levels.

11. To the before created staircase add railings to make it more realistic.

12. Add windows and doors to the interior walls.

13. With the help of load family load the components required for the project and add them in the drawing using components tool and add the plantings.

14. At last with the help of camera view option take the ppictures of individual rooms.
15. Save the project and all the changed done in the architectural template will be saced to the central file.
RESULT :
With the help of Architectural tab we can add all the required architectural components in the drawing and by saving it these changes will be reflected in the central file.

6ans

AIM : To render the images which were capture by the camera view, for example like the interior rooms, topographic views and structural framing.
TOOLS USED :
Render.
Region.
Style.
Scheme.
Sheet.
PROCEDURE :
1. First open the 3D view and open the picture we want to render.
2. Next go to view menu and click on render option.
3. Render dialog box appears.
4. Select region option and crop the region we want for the image.
5. We can change the scheme, styles and lighting options and click on render.
6. We will get the rendered image which appears more realistic and can be used for better presentation of te project.

7ans

AIM : To print the set of drawing sheets created and submit the drawings from architectural and structural model.
TOOLS USED :
File.
Print.
Setup page.
Select the plotter.
Print.
PROCEDURE :
1. select the views and go to file menu and click on print.
2. A print dialog box appears.
3. Change the settings on how we want the sheets to be printed and click on print option.
RESULT :
NOTE : AT PRESENT I DONT HAVE A PRINTER SO I'M UNABLE TO PRINT THE SHEETS. DUE TO THE PANDEMIC I'M UNABLE TO GO OUT FOR THE PRINTS.
I'M ONLY SENDING THE PICTURES OF THE SHEETS.