Radar Mast & Final Assembly of Yacht

PICTURES OF Radar Mast (ISOMETRIC,FRONT AND SIDE WITH FEATURE TREE)

YATCH

TITLE OF THE PROJECT:Design of Yatch

OBJECTIVE:To Draft,Design and Model the individual parts of a Yatch and assemble them on SOLIDWORKS.

Introduction :A yacht is a large boat with sails or a motor, used for racing or pleasure trips.

The Yatch consists of the following parts:

1)HULL

2)SUPERSTRUCTURE

3)RADAR MAST

4)GARAGE DOOR

5)RADAR

6)PROPELLER

7)FRONT,MIDDLE AND REAR SEAT.

Design Methadology

Following is the description of the parts designed and modelled along with the features used.

HULL:

• Hull is the base of the model
• Therefore it is enough to model one half and then mirror it.
• Hull is developed in surface modelling,then after completing the model it is converted into solid.

Features used:3D sketch,loft surface,Trim surface,Ruled surface,Boundary surface,Surface extrude,Knit surface,etc.

SUPER STRUCTURE:

• IT is placed on the top of the hull
• It is also a symmetric model ,hence mirroring feature is used extensively
• It protects the whole Yatch from external damage.

Features used:3D sketch,loft surface,Trim surface,Ruled surface,Boundary surface,Surface extrude,Knit surface,Fill Surface,Sweep,etc.

RADAR

• Radar is a device used for detecting objects
• It mates with another part called Radar mast and is placed on the top
• Name is engraved usinf text and cut extrude commands
• features used:Extrude,pattern,fillet,etc.

RADARMAST

• It is used to control the direction and position of the Radar
• Also produces signales which is sent and received to exchange information.
• Features used:Revolve,Project curve,reference plane,dome,etc.

Garage Door

• It is a symmetric model as well
• The name is engraved using text and cut extrude commands.

Features used-Cut extrude,Chamfer,etc.

PROPELLER

• Resembles a shape of a fan,and is placed such that it is submerged inside the water.
• It receives power from the engine
• As the name suggests it propelles the yatch in the desired direction by applying force in the opposite direction.
• Features used-Revolve,Pattern,Extrude cut,etc.

Seats

• Three arrangements are used in this model and are named as Front,Middle and Rear
• Named as per their locations.
• All the arrangements are placed on top of the Hull
• Features used-3D sketch,loft surface,Trim surface,Ruled surface,Boundary surface,Surface extrude,Knit surface,Fill Surface,Sweep,etc.

Front seat

Middle seat

Rear seat

Below are some pictures of the completely assembled of the Yatch

CONCLUSION

In this project "Modelling of Yatch",I had a very good opportunity to learn the fundamental parts involved in modelling of a yatch.Along with that I extensively gained knowledge in surface modelling in Solidworks.As a result I came across a number of commands and that way I got in depth knowledge in surfacing of 3D models.

Thus the required Yatch was designed and rendered.