Radar Mast & Final Assembly of Yacht
Report on yatch is givren below:
Design of Yacht
- The main objective of this project is to understand and implement various features of solidworks and create 3D model of yacht.
- Creating different parts and assembling of same.
- Apply different appearances to various parts.
- Rendering of model from different views and setting up different environments for the same.
Introduction
The design of yacht was created with help of e-book. By using various sketches and features modeling was done. Designing of this model covers almost every feature in solidworks.
Process Flow chart is given below:
Process
- First of all inserting and set up of blueprints was done to create yacht model. After this process modeling of hull was done.
- Following e-book radar, radar mast, garage door, super structure, front/middle and last seat were created accordingly.
- Assembly of parts to prepare a complete yacht model.
Description:
This model consists of parts given below:
- Propeller
- Radar
- Garage Door
- Hull
- Superstructure
- Radar mast
- Front, middle and rear seat
Features used for design are elaborated below:
- Sketch: Used to apply dimension and relation to define basic geometry.Basically two types of sketches are used : 2D sketch and 3D sketch
- Features: It contains extrude bose, swept boss, cut exclude, mirror bodies etc.
- Assembly: It is used to assmeble parts designed and to check mating surfaces and interferance.
- Rendering: To render the product applying realistic scenario and background set up along with to get basic appearance idea on product ergonomics.
The parts description is given below:
Propeller:
Propeller’s main function is to propel the yacht in forward or reverse direction in water. It is driven by propelling shaft connected to engine.
The images are given below:
Features used to prepare propeller are:
- Sketch
- Revolve
- Cut exclude
- Lofted boss
- fillet
Radar:
Its main objective is for tracing of nearby contour or terrain and navigate the vehicle.
The images are given below:
Features that are used:
- Exclude Boss
- Cut exclude
- Mirror of body
- Sketch driven pattern
Hull:
It is the main body of yacht that supports all the structures and glides over water.
The images are given below:
Features that are used:
- Surface Swept
- Extended surface
- Projected Curve
- Split Curve
- Mirror Entities
- Fillet
- Surface Trim
- Delete and fill Surface
- Applying decals
- Appearance
- Shell
- 3-D sketch
Superstructure:
Superstructure is used to accommodate passengers on-board and provide various facilities to them.
Images are shown below:
Features:
- Surface Swept
- Extended surface
- Projected Curve
- Split Curve
- Mirror Entities
- Fillet
- Surface Trim
- Delete and fill Surface
- Split surface
- Surface knit
- Create solid
- Delete Face
- Appearance
- Shell
- 3-D sketch
Front, Middle and rear Seat:
These seats are placed at front middle and rear of superstructure.
Images are shown below:
Features:
- Surface Sweep
- Surface Exclude
- Surface Offset
- Surface Trim
- Dome
- Lofted Surface
- Sweep Boss
- Reference geometry
- Delete and fill Surface
- Surface Knit
- Project Curve
- Chamfer
- Fillet
- Surface Off set
- Offset Entities
Radar Mast:
The function of radar mast to provide structural support and mounting for radar setup.
The images are given below:
Features:
- Mirror
- Project Curve
- Import Surface Body
- Appearance
- 3D sketch
- Fillet
- Chamfer
- Reference plane
- Dome
- Shell
Assembly of Yacht
The assembly of yacht was done using parts descripted above.
Various mates were applied to assemble structure.
Image Shown below:
Mates:
- Concentric
- Parallel
- Coincident
- Distance
- Plane Parallel
After completion of assembly rendering was done using Solidworks 360 view.
With help of different background and various perspectives rendering was done to create realistic look of yacht.
Rendered images are given below:
