Radar Mast & Final Assembly of Yacht
NAME_RADAR_MAST
NAME_ASSEMBLY_YATCH
Surface Modeling,assembly and photo Realistic Rendering of Yacht
Objective:
To model parts of yacht and assembly them in solid works.After the assembly the yacht is then refered for photo realistic view using solid works visualize
INTRODUCTION:
Solidworks is a 3D modelling software developed by Dassualt systems.It enables the user to create models parts assemble them and sheet metal design etc.,The designing of model
is achieved by using various features in the software and most used features have been listed below :
Commonly used features in Part design:
- part design has two types of features .i.e,sketch tools and 3Dfeatures
- sketch tools consists of 2D elements like line,polygons(different types of rectangles),circles,arcs,splines(a2D line which can be controlled by control points)
- A 3D features converts the sketch or 2D element into a 3-dimensional object by using features like extrude,extrude cut,revolve base,revolve cut,sweep,loftedbase,etc.,
- surface is a two-dimensional object with zero thickness
- most of the parts are designed using surfaces and then the surface are converted into solid by adding thickness
The components of yatch in this design are:
- propeller
- radar
- hull
- seats
- superstructure
- radarmast
- garage door
PART DESIGNING:
1.Blueprint Setup:It acts as reference for the part designing .The sketch picture is imported and adjust to match with the dimension
of part to be designed .It is made transperent to be able to view the objects behind it
2.HULL: It is the main part of the yacht . It provides accommodation for other parts like seats ,superstructure,garage,etc.,The body of hull is modelled using surface and then its converted into solide.
SURFACE OPERATIONS
Sweep surface
loft surface
Boundary surface
Kint surface
Trim surface
Delete face
Projection curve
Reference planes
SOLID OPERATIONS
Extrude
Extrude cut
Split
Dome
Fillet
Chamfer
Mirror
3.SUPER STRUCTURE: It is extended part of hull and facilities the accommodation of driver cabin.it is also
modelled using surfaces and then converted into solid.
Surface operations
Extrude surface
Sweep surface
Extend surface
Loft surface
Boundary surface
Fill surface
Kint surface
Trim surface
Delete face
Projection surface
reference plane
Solid operations
Extrude
Extrude cut
Dome
Fillet
Chamfer
mirror
4.RadarMast:It placed on the superstructure to detect objects in the path of yacht so thereby avoiding collision
it is designined in solid modeling
- Extrude
- Extrude cut
- Revolve
- Sweep
- Sheel
- Reference plane
- Projection curve
- Dome
- Mirror
5.RADAR: It is part of radar mast and used to detect objects
- Extrude
- Extrude cut
- Mirror
- Fillet
6.SEATS: These facilites the seating of passenger during the journey.these are named after thier position in the yacht i.e.,Front,Middle and Rear seat
Both front and rear seats are modelled using surfaces while middle seat is designed using solid modelling .
SURFACE OPERATIONS:
- Extrude surface
- sweep surface
- Extend surface
- Loft surface
- Boundary surface
- Fill surface
- Kint surface
- Trim surface
- Delete face
- projection curve
- Reference planes
Solid operations
- Extrude
- Extrude cut
- Dome
- Fillet
- Chamfer
- Mirror
MIDDLE SEAT
.
REAR SEAT
7.GARAGE DOOR: It is used as clouser for garage or storage room
- Extrude
- Extrude cut
- Mirror
- Chamfer
- Fillet
8.Propeller: It used to create thrust to propeller the yacht . The thrust is created by the rotating blades
- Revolve
- Loft
- Circular pattern
- Fillet
ASSEMBLY:
After the completion of part modelling , the next step is assembly of those into a yatch
The relation between the part is defined by mates.These are different types of mates in the assdembly :
- Convcentric mate
- Coincident mate
- Parallel mate
parts like the super structure and seats are designed using a surface from hull . When these parts are imported into assembly workbench they are fixed automatically
at thier positions without any mates . Or they can be fixed by using mates
Radar mast is designed by using a reference surface of super structure so it is automatically fixed ont the superstructure
Appearaance of part is done in assembly to have an idea about designing or materials of the parts .Different appearance
is assigned to the parts according to thier nature
Decales are imposed on the surface of the parts to give it an aesthitic look.these can be images or
patterns or any kind of designs according to the choice of designer
NOTE:
The sketches should be fully defined the position of entities must be defined fully with
respect to orgin or any other reference
Avoid the mates between planes of parts and assembly planes.Instead of create mates with respect to main component
RENDERING:
Rendering is done to apply real time graphics to the yacht . We can assign a scene or envirorment in
which the yacht is placed and we can modify the colors of it . We can use different situations like sunny , or
dark envirorment to check the behaviour or looks of the yavcht under a particular condition we can apply different
view positions to view it from different positions and angles to came a conclusion about it design.
CONCLUSION:
Surface modelling is the one of the complex things in designing selection approprite tool to enerate
surfaces is key to modelling . The gaps between surfaces will play an important role while converting
surface bodies into solid . The designing of yacht will give an oppurtunity tools of surface modelling