Project 5

There are many types of Arduino distance sensors, but in this project we have used the HC-SR04 to measure distance in range of 2cm-400cm with an accuracy of 3mm. The sensor module consists of an ultrasonic transmitter, receiver and control circuit. The working principle of ultrasonic sensor is as follows:    1.…

Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on…

#include <stdio.h>void Initiate_State_Machine();void GearDown();void CheckingBeforeTakeOFF();void RaisingGear();void GearUp();void CheckBeforeLanding();void LoweringGear();static void(*statetable[])(void)={GearDown, CheckingBeforeTakeOFF, RaisingGear, GearUp, CheckBeforeLanding, LoweringGear};typedef enum State{…

#include <stdbool.h>#include <stdio.h>#include <stdlib.h>// Link list nodestruct Node { int data; struct Node* next;}; void push(struct Node** head_ref, int new_data);int isPresent(struct Node* head, int data);// Function to get union of two linked lists head1 and head2struct Node* getUnion(struct Node*…

1. In this project we have to create a 10 cells series coonecton and calculate the voltage ,current and SOC also simulate the aging and thermal effects . steps 1 first we creat 10 series cells as in my project 2 then we connect current sensor and voltage sensor to that 3 connect display and scope 4 than we  connect…

I dont get access of powertrain from simulink add on , i tried couples of times , than i used spreadsheet to import data using excel as my tuitor suggest. time data   0 0   0.1 1   0.2 2   0.3 3   0.4 4   0.5 5   0.6 6        

 TO find out the capacity of battery pack and no. of series parallel connectioon we have to first calculate the power, than travel factor , power required in series parallel connection. steps power = v*i 1200 =65*i i= 1200/65travel factor  = 18.46 amp. Current withdrawn By Motor 18.46 AmpAssure Current Loss 1-10%After…

A buck converter (step-down converter) is a DC to DC power converter which steps down voltage. The input voltage is 48V, the Output voltage is 12 V, and runs the simulation. 1. we choose dc voltage source give input as 48 v 2. a mosfet , we connect one end to step and second to dc source, third end to diode as…

.