Challenge

Project - 2 - Generating the report for hypermesh file

SStanis Sebastian20 May 2022

Objective:

This project will test you on following abilities.

Your expertise in the commands that have been taught to you
Your ability to research for commands that will do what you intend to do
Your skills in excel

The final goal is to create an ergonomic and visually appealing excel (.xlsm) report that contains following information about your model:

User name, date, time
Profile/deck; count of component, prop, material, elements
Count of empty comp/prop/mats
Elements failed in all qualities or duplicates as discussed before

Code:

# User name, date, time
*clearmarkall 1
*clearmarkall 2
set filename [open Output.csv w]
set systemname "$env(COMPUTERNAME)"
puts $filename "USERNAME-$systemname"
puts $filename [clock format [clock seconds]]

# Profile/deck; count of component, prop, material, elements
set profile [ hm_info templatetype]
puts $filename "Current Profile = $profile"
*createmark comp 1 "all"
set comp [hm_getmark comp 1]
set n_comp [llength $comp]
puts $filename "No of Components = $n_comp "
*createmark prop 1 "all"
set prop [hm_getmark prop 1]
set n_prop [llength $prop]
puts $filename "No of Properties = $n_prop "
*createmark mat 1 "all"
set mat [hm_getmark mat 1]
set n_mat [llength $mat]
puts $filename "No of Materials = $n_mat "
*createmark elems 1 "all"
set elems [hm_getmark elems 1]
set n_elems [llength $elems]
*createmark elems 1 "by config" quad4
set n_quad [hm_marklength elems 1]
*createmark elems 1 "by config" tria3
set n_tria [hm_marklength elems 1]
puts $filename "No of QUAD Elements t $n_quad "
puts $filename "No of TRIA Elements t $n_tria "
puts $filename "TOtal No of Elements t $n_elems "

# Count of empty comp/prop/mats
*EntityPreviewEmpty comps 1
set comp1 [hm_marklength comps 1]
set a1 [hm_getmark comps 1]
puts $filename "No of Empty Comps - $comp1"
*EntityPreviewUnused prop 1
set p1 [hm_marklength prop 1]
set b1 [hm_getmark prop 1]
puts $filename "No of Unused Properties - $p1"
*EntityPreviewUnused mat 1
set m1 [hm_marklength mat 1]
set c1 [hm_getmark mat 1]
puts $filename "No of Unused Materials - $m1"

# ElementQuality
set minlength {2}
*createmark elems 1 "all"
*elementtestlength elems 1 $minlength 2 1 2 0 "2D length <"
set minfail [hm_marklength elems 2]
set maxlength {8}
*createmark elems 1 "all"
*elementtestlength elems 1 $maxlength 2 0 2 0 "2D length >"
set maxfail [hm_marklength elems 2]
set skew {60}
*createmark elems 1 "all"
*elementtestskew elements 1 $skew 2 2 0 " 2D Skew "
set skewe [hm_marklength elems 2]
set jacobian {0.5}
*createmark elems 1 "all"
*elementtestjacobian elements 1 $jacobian 2 2 0 " 2D Jacobian "
set jacobiane [hm_marklength elems 2]
set triaminangle {20}
*createmark elems 1 "all"
*elementtestinterangle elements 1 $triaminangle 1 2 1 2 0 " 2D Tria Min Angle "
set triamine [hm_marklength elems 2]
set triamaxangle {120}
*createmark elems 1 "all"
*elementtestinterangle elements 1 $triamaxangle 1 2 0 2 0 " 2D Tria Max Angle "
set triamaxe [hm_marklength elems 2]
set quadminangle {45}
*createmark elems 1 "all"
*elementtestinterangle elements 1 $quadminangle 0 2 1 2 0 " 2D Quad Min Angle "
set quadmine [hm_marklength elems 2]
set quadmaxangle {135}
*createmark elems 1 "all"
*elementtestinterangle elements 1 $quadmaxangle 0 2 0 2 0 " 2D Quad Max Angle "
set quadmaxe [hm_marklength elems 2]
puts $filename "Element Quality Checks"
puts $filename "Minimum length - $minfail of $n_elems"
puts $filename "Maximum length - $maxfail of $n_elems"
puts $filename "Skew - $skewe of $n_elems"
puts $filename "Jacobian - $jacobiane of $n_elems"
puts $filename "Min Tria Angle - $triamine of $n_tria"
puts $filename "Max Tria Angle - $triamaxe of $n_tria"
puts $filename "Min Quad Angle - $quadmine of $n_quad"
puts $filename "Max Quad Angle - $quadmaxe of $n_quad"

close $filename

Explanation:

#clearing of the previous saved items and saved in 1

#clearing of the previous saved items and saved in 2

#open the excel file named as output.csv and writing

#set the system name as required variables

#printing the username in the file

#print the clock in file

# Profile/deck; count of component, prop, material, elements
set profile [ hm_info templatetype]
puts $filename "Current Profile = $profile"
*createmark comp 1 "all" -- #
set comp [hm_getmark comp 1]
set n_comp [llength $comp]
puts $filename "No of Components = $n_comp "
*createmark prop 1 "all"
set prop [hm_getmark prop 1]
set n_prop [llength $prop]
puts $filename "No of Properties = $n_prop "
*createmark mat 1 "all"
set mat [hm_getmark mat 1]
set n_mat [llength $mat]
puts $filename "No of Materials = $n_mat "
*createmark elems 1 "all"
set elems [hm_getmark elems 1]
set n_elems [llength $elems]
*createmark elems 1 "by config" quad4
set n_quad [hm_marklength elems 1]
*createmark elems 1 "by config" tria3
set n_tria [hm_marklength elems 1]
puts $filename "No of QUAD Elements t $n_quad "
puts $filename "No of TRIA Elements t $n_tria "
puts $filename "TOtal No of Elements t $n_elems "

#checking for the template type and matching with the variables

#printing of profile name in the file

#checking for how many components and linked with variables

#printing the total number of components in the file

#how many props are linked with variables are checked

#printing the total number of properties in the file.

#how many materials are linked with variables are checked

#printing the total number of materials in the file

#checking of the total number of elements

#Number of quads present in the model

#Number of trias present in the model

#printing of total elements of quads and trias in the model

#checking of the empty components

#saving of the checked components as variables

#printing the number of components in a file

#checking for the unused properties

#saving of the unused checked props as variables

#printing the number of props in a file

#checking for the unused materials

#saving of the unused checked mat as varaible

#printing the number of materials in a file

close $filename

#checking for the min length

saving of the failed elements and linking with variable