Project 2
Ans 1) By Increasing the load resistance to 150 Ohm Output Voltage observed is 324.8 V and Output current was found to be 2.165 Amp
Here we will desigb a simulink model based on the following parameters.
- Power = 150Kw
- Input AC voltage = 3 phase 11Kv, 50Hz
- Output DC voltage = 15KV DC @10A
Here we will calculate the Component values from a matlab script which is attached at the end.
Also we have selected the Thyridtor for this model from IXYS manafactures with the part
number MCC312 which has the following features.
- Itrms = 1040A
- Itavm = 640A
- Vrrm = 1200-1800V
We will use multiple Thyristors in series to meet trhe model requirements.
other detailed features for this product can be found from its datasheet which will be attached
below.
after this we will build the simulink model as shown below.
The output voltage and current will be as.
PFA model files. and datasheets