Project 2

Objective:

Statement of  assignment :

Route the wiring harness on the given car body and prepare a flattened view drawing in CATIA V5 .Application of all packing rules , Industry best practices studied in this course shall be demonstrated in design. apply protection convering as required.

Available connector 3D data can be used , or you can download the connectors from www.te.com 

Prepare & submit all necessary reports like clearance ,cliping /clamping selection , Harness fixing reqirements , harnees continuty, and Assumption if any along with CATIA 3D data .

PROCEDURE:

Given the Electrical properties to the connectors, and clip.

Connector :

Cretate a point on the mating surface and a point at the back as the bundle entry point . Create an axis on the point .

Create 3 plane entry point ,entry plane , mid plane , exit point ,and exit plane  create electrical definetion

Flattening the Harness Assembly : 

Create a new product and go into the 'Electrical Harness Flattening' workbench .

Click on the Harness Flattening parameter 'option to adjust the parameters 

Create a 'Drawing file and add the harness assembly to the drawing .

Conclusion :-

All the necessary properties are applied to the connector , clip,p-clamp, and channel. provided proper routing of then bundle with support part like clips and clamps . 

Added protective covering to the bundles . 

Flattened the harness assembly completely .Placed the flattened view on the drawing sheet .