Project 1 (Mini Project on Vehicle Direction Detection

Mini Project.

Subsystem Requirment_1

Subsystem Requirment_2

• Signal name_steering wheel is a niput for this system.
• Compared with three angular value:- left turn, right turn, and straight drive with the respected calibration value, to define which specific direction the steering wheel turning toward.
• Use switch block to compare and develop requirment as a subsistem and give output is a local signal.
• Keep this requirment as a separate subsystem. Input this requirment are with local siganl from requirment_1 as Signal neme: Vehicle_Turn_Status and an input from the camara as Signal name: Camarainput_Roadsign, which confirms the occurrences of a road sign.
• Signal vehicle_Turn_Staus is compared against calibration value, if each of them found equal, then each of the three corresponding output is compared against the camara input signal.
• Used the logical opretor block only one among them is finally given as output signal.(Signal Name:- Vehicle_Direction_Indicator)

SLDD File

Code Generation

Configuration Parameter_Solver

Configuration Parameter_Code Genetation

Model Advisor