Project 1 - Implement a fully functional Queue in C language using Linked lists

1) Device DriverWrite the device driver for MCP9808 Temperature Sensor.Probe function: Register the Platform device under driver/misc.Read function: It should send the i2c message to read the data from sensor and copy it to the user space.Alert pin connected to BBB as gpio interrupt. The temp sensor is programmed…

Foundation of Cyber Security: Case Study: 1). Windows XP was installed. Then needs to be done in the first place to wipe the contents of the disk in the first place: In this Scenario the system had old window XP operating system (OS). Then here need to change the OS to the system. But in that system contain some data content.…

Aim: Model development of one specific requirement of highway Assistant-Lane Changing Assistant Algorithm which is an Advanced Driver Assistance System (ADAS) feature using MATLAB  Project Objective: The Model is Developed in MATLAB simulink as per the Model Based Design(MBD) feature using MATLABCode generation profile…

Development of TFT Cluster Speedometer Software Component. Cluster Instrument receives the signals from other ECU via CAN bus interface. It also receives commands from the driver via steering wheel buttons. The signals are then processed by the Cluster ECU, after which the Cluster ECU may send the vehicle information to…

1.Simulink/state flow modules for wiper control system Aim:     To develop a Simulink/state flow modules for wiper control system based on the given conditions. Conditions: If the density of the rain is low, then wiper rotates with low speed, the output signal should be 100rpmIf the density of the rain…

1. For a 10 cell series lithium ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. Now a days lithium ion battery are mostly used in electric vehicles we must know its charge and discharge rates to operate this batterys…

Project Overview: The project involves creating a Linux kernel module for a character device driver. The module provides functionality such as open, release, read, write, and seek operations on a character device. Additionally, a /proc entry is created to display the size of the memory allocated to the character device.…

Battery pack capacity: 18 kWh Cell: ANR26650M1-B  Prepare a detailed battery pack drawing along with its enclosure. State your assumptions. Answer: Abstract: This detailed analysis outlines the process of designing a battery pack with a capacity of 18 kWh using ANR26650M1-B lithium iron phosphate cells. The study…

1.Simulate the 3 test cases from harness dashboard and write a detailed report on the results     From the plot we can see  the vehicle is initially in driving state and charging was done till 90%. After charging it reaches to standby mode. It can be seen in BMS state plot.Battery temperature increases in…

1.Prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it Lithium-ion Cell Type Anode Material Cathode Material  Reaction LCO Graphite Lithium Cobalt Oxide (LiCoO2) Anode:…

1.  Which types of power converter circuits are employed in electric and hybrid electric vehicle?    Ans:- As we know, the basic differences between the Electric vehicle and Hybrid electric vehicle are    Electric vehicle operated by one  source of energy i.e:-Electric supply where as the…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the  H-bridge model.  Ans:-…

1. For a defined driving cycle, calculate the energy required for braking. Ans:- Drive Cycle:- Drive cycle gives a plot between the speed of the vehicle & time.by using the drive cycle we can determine various information like as follows:-(A) We can determine the highest speed & lowest speed of the vehicle…

Final Project: Design of an Electric Vehicle Aim:- To create a Simulink model of electric car which uses a battery and a DC motor.To check for which motor rating value, the actual drive cycle will match with loaded drive cycle. Explanation:-              Actually, we can say that there…

Part A: 1. Search and list out the total weight of various types of aircrafts.  2. Is there any difference between ground speed and air speed? 3. Why is it not recommended to use aircraft engine power to move it on the ground at Airport?  4. How an aircraft is pushed to runway when its ready to take off? 5. Learn…

1) What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type? Mapped model Engine:- It is static model which is use to show the results on the basic of data which is input by calculated values. Power train block set provides two types of combustion engine…

Use ADVISOR tool and simulate the following 1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. Open the ADVISOR toolSet the load file is EV_defaults_inPut 500 kg in cargo massClick on…

Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most common feature in Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort function, the…

Program for Attack Terminal:   i) a) Dos Attack for Full CAN bus: The web server is now prone to attacks and is an easy target for the hackers. Hackers usually attempt two types of attack. DoS (Denial-of-Service) DDoS (Distribted Denial of Service)  DoS (Denial-of-Service) Attack The Denial of Service (DoS)…

A program in Bash that performs a binary search for a given signal using the instrument cluster as a source for CAN traffic. Set up the working directory: Create a directory named "logs" to store the log files. You can use the mkdir command in Bash to create the directory.Ensure that you have the necessary CAN tools installed,…

To create a program that logs CAN data from one or more CAN buses and sorts them into even and odd ARB ID logs, with a limit of 1000 messages per log, we can use the SocketCAN package in Linux along with Python. The program will continuously listen to CAN messages, sort them based on their ARB ID, and store them in separate…

#include <bits/stdc++.h> using namespace std;   struct QNode    {          int data;          QNode* next;          QNode(int d)          {…

GPS : Consumer grade off-the-shelf GPS sensors, also known as GPS mice (e.g., Garmin GPS), are usually connected over USB and implement a serial-to-USB connection with the help of FTDI devices. The Xsens GPS device can be connected through a serial-to-USB connection. Code : 1.  #include <iostream>2.  #include…

Question Carry out a system-level simulation of an all-terrain vehicle.  Download the model from the given link:  https://www.mathworks.com/matlabcentral/fileexchange/70576-baja-all-terrain-vehicle-atv-model Prepare a technical report explaining the model properties & comments on the results. Grading Policy:…

1. Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then…

Make a Simulink model of Doorbell using solenoid block with the following details:   In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation where the switch is closed…

1] Testrain.c Step 1: start LDRA TBrun.  From the LDRA page select source->single file->LDRA_workarea->examples->C_Testbed_examples->Testrain->Testrain.c->open.(in log view all the files will run) Step 2: sequence->new->give any name (---)& select code coverage-> continue. Then, source->run…

Test features required to the customer: Test feature 1: When long pressed the power button of the phone shall switch on with a company logo at the centre of the screen. Test feature 2: When the power button is pressed my phone is switched ON and all my icons of…

/* * measuringdistanceultrasonic.c * * Created: 08-01-2023  * Author : vvenkatraman */ #define F_CPU 8000000UL#include <avr/io.h>#include <avr/interrupt.h>#include <util/delay.h>#include #include #define LCD_Data_Dir DDRD /* Define LCD data port direction */#define LCD_Command_Dir DDRC /* Define…

Circuit diagram:- Program:- /* * dcmotorpwm.c * * Created: 31-12-2022 23:34:17 * Author : vvenkatraman */ #include <avr/io.h> // we are using i/o resisters of avr#define F_CPU 16000000ul //define the crystal frequency#include "avr/interrupt.h" // we are using external interrupt pin#include <util/delay.h> //delay…

https://www.tinkercad.com/things/5H6l7MNN4tZ-spectacular-jaban-densor/editel?tenant=circuits /* The circuit:- +V connection of the PING))) attached to +5V- GND connection of the PING))) attached to ground- SIG connection of the PING))) attached to digital pin 7// this constant won't change. It's the pin number of the sensor's…

#include<stdio.h> // header file#include<stdlib.h> //library file#include<stdint.h> // integer file#include<string.h> //string headervoid Gear_down(); //function calls for operationvoid Checking_Before_TakeOFF_delay_3s();void Raising_Gear();void Gear_up();void Checking_before_landing();void Lowering_gear();typedef…

https://www.tinkercad.com/things/ftDQPSbEazs-fantabulous-hillar/editel Program : #include<LiquidCrystal.h>                        //Library for LCD display function LiquidCrystal lcd(12, 11, 5, 4, 3,…

#include #include struct node // A structure of linked list node{ int data; struct node *next;} *firstlink, *secondlink, *unionlink, *intersectionlink; void initialize() //initiallize node creation {firstlink = secondlink = NULL;} //Given a Inserts a node in front of a singly linked list. void insert(struct node **head,…

#include <stdio.h>#include <stdlib.h>struct node // A structure of linked list node{ int data; struct node *next;} *firstlink, *secondlink, *unionlink, *intersectionlink; void initialize() //initiallize node creation {firstlink = secondlink = NULL;} //Given a Inserts a node in front of a singly linked list.…