Project 1

Description:As discussed in Lecture 11, Project 2 deals with the development of a forward energy-based fuel consumption model of a P1 hybrid vehicle. This model is based on the conventional vehicle model from Project 1. The main goal of this project is to understand the functionality of a P1 hybrid and be able to model…

Project 1 deals with the development of a forward energy-based fuel consumption model of a conventional vehicle. The main goal of this project is to get familiar with the modeling process, writing scripts in Matlab, modeling in Simulink, analyzing data and generating plots. In this project, a typical midsize car with a…

Obtain the transfer function of a mass spring damper system and use it in the model. Add a PID controller to adjust the force on mass so that its position follows a reference signal. Take m = 3.6; %kg k = 400; %N/m c = 100; %Ns/m

clear; clc; % interpolation of voltage and current data % reading excel file data D =readmatrix('VI.xlsx'); v=D(:,1); % voltage data seperating i=D(:,2); % current data separating xq=[-17,3:0.1:0.9]; % given interpolation yq1=interp1(v,i,xq); % linear interpolation yq2=interp1(v,i,xq,'spline'); % spline interpolation %…

Identify each of the major elements in the above automotive wiring diagram.  Explain the purpose and working of any three elements briefly. If the total load is 10A from battery, what should be the fuse rating? If 500W is the load, what is the voltage and capacity of battery you recommend? Identify any two elements…