FINAL INDEPENDENT PROJECT

The below google drive link contains all the documents and files related to the Final Independent Project,

THE FILE CONTAING,

*SPACE X DRAGON PART, RENDERED IMAGES, PROJECT REPORT , DRAWING FILE AND IMAGES.

DRIVE LINK:https://drive.google.com/file/d/1GiveiR0HIM-TGvCdfRsZhovAcTwZi9X4/view?usp=sharing

SPACE X DRAGON:

*Space x dragon is a reusable cargo spacecraft developed by space x, an American private space transportation company.The first Space X Crew Dragon spacecraft to carry astronauts successfully docked with the International Space Station May 31, at 10:16 a.m. after a successful launch into orbit May 30.

OBJECTIVE:

To design a space x dragon and its componants by using solidworks 2018. There are sevan individual parts to design.Then finally they are assembled together and Rendered by photoview 360 and also Rendered by solidworks visualize.

MAJOR COMPONANTS:

*Capsule

*Trunk

*Lock

CAPSULE:

In this solid modal having cabin inside of the capsule, then the total height of the capsule is 11,500mm and the Diameter of the capsule is 12,500 mm. In this cabin height is 7,000mm and the radius of the cabin is 3,350 mm. In this capsule design line, circle, mirror, surface extrude, surface trim, surface knit, surface revolve, extrude, extrude cut, revolve, circular pattern, linear pattern, dome, fillet, chamfer, these commands are mainly used. Photoview-360 which is used to adding a decal into the capsule and rendering.

PART DIAGRAM:

CABIN:

The cabin which is used to transport humans safely, with environment condition. In this design having seating arrangement inside of the cabin and the below part diagram shows the dimensions of this design. Then the cabin design carrying sevan astronauts. In this design the height of the cabin is 7000mm and the diameter of the cabin is 3500 mm.

PART DIAGRAM:

CABIN HATCH:

In this design has been done by save bodies command and this part used to entering the space x capsule cabin.Then this cabin door is used to astronauts safty entring to cabin.

PART DIAGRAM:

CAPSULE HATCH :

In this design was done by save bodies feature. In this part which is used to entering the space x capsule.

PART DIAGRAM:

TOP HATCH:

In this part which is used to dock to ISS. Then this part placed on top of the capsule. In this design having lock this is used to mate the capsule.

PART DIAGRAM:

TRUNK:

The height of the drunk is 13,500mm and the diameter of the trunk is 11,500 mm. In this trunk having four fins which is placed on x direction. In this rectangular part which is shown as a solar panel. Then the top side extrudes cut face which is used to hold the capsule. Then bottom face which is used to fix the space craft. In this design line, circle, boss extrude, extrude cut, circular pattern, fillet, chamfer, revolve, surface extrude, surface sweep, knit surface, surface offset, split line reference plane these commands are mainly used.

PART DIAGRAM:

LOCK KEY:

The height of the key is 3,250mm and width is 500 mm and the length is 1000mm these are major dimensions of the lock. Then line, boss extrude, extrude cut, fillet, sp-line, these commands are mainly used.

It will help to join capsule and trunk of the dragon. If the lock will undock at in case any urgent situation occurring on space craft.

PART DIAGRAM:

FINAL ASSEMBLY:

THEN THE MODELING AND ASSEMBING OF SPACE X DRAGON HAS BEEN DONE BY USING SOLIDWORKS 2018.