Design the Body of the Butterfly valve

REPORT :

objective : To design the body parts of butterfly parts by using catia V5 software and then assemble the parts.

This is drafting for butterfly assembly and here i use geometrical cahracteristic as position tolerance zone shape as diameter with datums and modifiers to fix the drawing

This is also drafting for assembly part in other view

> Here we use Datum target area to show the area and datum and a flateness geometric characteristic

> This is the drafting for Retainer

> Here we use position,perpendicular,profile and flateness geometric characteristic with datums and modifiers

> Here also Datum target area is used to show the area and datums

> By using above tolerances we fixed the diagram

> This is drafting for a shaft

> Here also we use poistion geometric tolerance and diameter as tolerance zone shape

> Here we use box type dimension to reperesent position of the drawing

> This is drafting for lever.

> Here we use position,perpendicular and profile type geometric characteristic and tolerance zone shape as diameter.

> Here also we use modifiers and datums to fix the drawing.

> This is drafting for plate

> Here we use geoemtric characteristics as perpendicular,position and profile

> we use datum target area to show the area and datums

> In other view we use flateness and profile geometric characteristic

> This is the drafting for bolt

> Here we use datums A and B,perpendicular geomtric characteristic with tolerance zone shape as diameter and modifier

> This is the drafting for nut

> Here we use position geometric characteristic and datums

FINALLY ASSEMBLE ALL PARTS BY USING ASSEMBLY DESIGN IN CATIA V5 SUCCESFULLY