Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad

1.ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0"
• Click on workspace switiching option then click on 3D Modelling now start making drawing.
• Create a rectangle which is 2'-6" X 3' ft. Then go to the Shaded option use extrude command.
• Extrude the rectangle at an height of 2'-6".
• After that use solidedit command go to body option then shell option select the object then select left face of the object.
• Enter a thickness which we want which is 2" and done our drawing is ready.

2.ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0"
• Click on workspace switiching option then click on 3D Modelling now start making drawing.
• Create a rectangle which is 1' X 1'. Then make it as region by using region command.
• After that use extrude command then click on taper angel select height as 120 degree and and 2'ft height.
• Then use line command to make 6" inch bottom and drawing is complete.

3.ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0"
• Click on workspace switiching option then click on 3D Modelling now start making drawing.
• Draw a line which is 1' long then give an offset of 4" and 6" to the downward side.
• Use ray command and draw a straight line at the middle then give an offset of 3" to the right and 3" to the left side.
• Now create a hunch to the top side and again give an offset of 1'-6" , 6", 5", 1".
• Then use vertical middle line and give an offset of 9" and 8" to the right and to the left.
• The line plan is ready now.
• Use region command then use 3Drotate command rotate it in 180 degree.
• Then use extrude command and drawing is done.

4.ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0"
• Click on workspace switiching option then click on 3D Modelling now start making drawing.
• Create a circle which is 1'-6" then use 3d rotate command and rotate it into XZ plane 90 degree.
• Then use command region and extrude it at an length of 10'ft.
• After that use cone command make bottom radius as 1'-6" and top radius as 3'-6".
• Then one only one remaining for that use pyramid command start from the center of the cone set bottom dimesion as 4'-6" and bottom 4'-6" and drawing is complete.

5.ANS:-

• Create a new sheet in autocad type UN command and drawing unit dialogue box will open.
• Select type as engineering and precision as 0'-0" then close it.
• Then type D dimension style manager will open after that click on modify.
• The modifing dialogue box will open.
• Everything will be set up as per standards accept the primary unit.
• Unit format set as Engineering and unit as 0'-0"
• Click on workspace switiching option then click on 3D Modelling now start making drawing.
• Draw a line 12'-6" long vertically and horizontal line of 10'ft.
• Use offset command select vertical line and give an offset of 10'ft.
• Join the two vertical lines from the bottom then select this recently drawn bottom line and give an offset of 7'ft.
• After that use ray command at top middle by using this line give an offset of 1'-6" to the right and left.
• Now select top horizontal line which is 10'ft long give and offset of 2'ft and make triangle to the top portion.
• Trim non-required lines and our plan is ready.
• Use 3drotate command ratate the plan at 90 degree and then use region command make it as region.
• After that use extrude command exrude it 6"inches and our drawing is done.