Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

1.Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. 

AIM: 

To create a set of sinusoidal points and curve using Dynamo. 

PROCEDIRE: 

• In the new Revit file, Open Dynamo file.
• In the Dynamo file, points are created using point by co-ordinate command and points are added
• In order to connect the points into curve, curve sommand is used as shown below.
• The sinosoidal function os the curve is created by using the math formula and the amplitude and phase is set to obtain a well defined curvatue. 

2.reate a conceptual layout of floor plan in dynamo . Using the tools available in dynamo link the lines to appropriate model elements in Revit by choosing the wall types and wall parameters. Make use of the sliders to slide through the height of the wall and length of the wall 

AIM: 

To create a appropriate model element for walls using Dynamo link. 

PROCEDURE: 

• In the new Revit file, Open Dynamo file.
•  In the Dynamo file, points are created using point by co-ordinate command and points are added 
• For a specific wall type, the loaded wall elements can be selected and the height of the wall can also be selected simultaniously as shwon 
• The changes made in Dynamo link can be viewed in the revit file 

3.Create an array of model elements in Revit. Use dynamo to vary the properties of model elements by using the slider or code block 

AIM: 

To create an array of model elements in revit and vary the properties in Dynamo. 

PROCEDURE: 

• The elemnets are created in the Revit file and the same is selected in Dynamo link as shwon below.
• These items can be rotated and modified using Dynamo link as shown below.

4.Create a conceptual mass in Revit and develop a parametric column by dividing the surfaces and apply the concepts similar to used in parametric walkway modelling. Use triangular bent or square shaped panels to add finish to the parametric column 

AIM: 

To create a conceptual mass and apply add triangular bent to add finish to the structure. 

PROXEDURE: 

• The required conceptual mass is created in Revit
• Once the required shape is created, the polygon shape is set and the block is created 
• family with triangular bent shapes are created which are then added to the project the assigned to the model

5.Use Dynamo to work on developing a Parametric Stadium. List your parameters and use the visual programming approach to complete the modelling, You can use the concepts discussed in parametric high rise tower in class for reference. 

AIM: 

To create conceptual mass using visual programming. 

PROCEDURE: 

• In the new Revit file, Open Dynamo file.
•  In the Dynamo file, points are created using point by co-ordinate command and points and levels are added
• Rectangle slides are created and conected by co-ordinates.
•  Rotation slider is used to rotate the the rectandular slides. The levels can be ajusted using the slider used to set the height.
• The final model obtained