Creating Architectural and Structural model with 3D rendering using REVIT
ANSWER NO 1
AIM : Select the type of structure you want to build from one of the three below:
a. Multi-Unit Residential Apartment
b. Office Buildings
c. School
Answer no 1 Multi-Unit Residential Apartment.
ANSWER NO 2
AIM : Assume reasonable assumptions for geographic and location details for your project modeling. Based on assumptions and type of structure selected identify the modeling requirements from NBC.
ANSWER NO 2 According to the NBC their are some reasonable assumptions for geographic and location details for our project modeling:
- The open space around the building shall not be less than 4.5m
- The type of construction as type 2 construction, the FAR value for the business building shall be taken as 2.9.
- The plot size is taken as 40mx70m i.e, 2800m2m2 and individual floor area is 2000m2m2. Hence, FAR value obtained is 2.14 which is within the prescribed limits as per NBC.
- The width of the road abutting the building is taken as 9m (30')
ANSWER NO 3
AIM :Using the structural model, include the following components based on the type of structure selected
a. Foundation – Isolated / Wall/Matt Foundation
b. Columns
c. Beams Connected to Columns
d. Roof Framing/ Truss
e. Floor / Decks
f. Floor Openings for Elevators and Stairs
PROCEDURE:
STEP 1 OPEN THE REVIT SOFTWARE AND SELLECT THE STRUCTURAL TEMPLETES.
STEP 2 GO TO THE GRID OPTION
STEP 3 CREATE THE GRID
STEP 4 GO THE MANAGE TAB AND SELELCT THE COORDINATION IN COORDINATION WE ARE SELLECT THE SPECIFY COORDINATION POINT AND THE AXIS IS (0,0) FOR CHECKING WE ARE USING VG COOMAND IN VG COMMAND WE ARE GOING IN SITE OPTION THEN SELECT THE PROJECT BASE POINT.
STEP 5 GO TO THE ELEVATION VIEW AND CREATE THE FIRST FLOOR LEVEL, SECOND, THIRD, ROOF, GROUND,FOUNDATION LEVEL. ACCORDING TO THE NBC
STEP 6 GO TO THE FOUNDATION LEVEL
STEP 7 GO TO THE STRUCTURE TAB AND SELELCT ISOLATED FOUNDATION .
STEP 8 COPY THE ALL GRIDES AND SELLECT THE TRUE OPTION
STEP 9 GO TO THE 3D VIEW AND CHECK THE ISOLATED FOUNDATION
STEP 10 GO TO THE GROUND LEVEL
STEP 11 GO TO THE STRUCTURAL TEMPLAATES AND SELECT THE COLOUM IN COLOUM WE ARE SELELCT THE VERTCAL COLOUM AT GRIDES.
STEP 12 SELECT ALL GRIDES AND PASTE THE OLOUM AT GRIDES WITH TICK THA CORRECT MARK
STEP 13 GO TO THE 3D VIEW
STEP 14 GO TO THE STRUCTURAL TEMPLATES AND SELECT THE BEAM OPTION
STEP 15 SELELCT THE GROUND LEVEL AND THE THE SELLECT THE ALL GRIDES THE GO TO THE STRUCTURAL TAB THEN SELLECT THE BEAM OPTION THEN SELLECT THE AT GRIDES THE TICK THE COORECT OPTION.
STEP 16 SELELCT THE FIRST LEVEL AND THE THE SELLECT THE ALL GRIDES THE GO TO THE STRUCTURAL TAB THEN SELLECT THE BEAM OPTION THEN SELLECT THE AT GRIDES THE TICK THE COORECT OPTION
STEP 17 SELELCT THE SECOND LEVEL AND THE THE SELLECT THE ALL GRIDES THE GO TO THE STRUCTURAL TAB THEN SELLECT THE BEAM OPTION THEN SELLECT THE AT GRIDES THE TICK THE COORECT OPTION
STEP 17 GO TO THE 3D VIEW
STEP 18 GO TO THE GROUND LEVEL AND SELLECT THE ARCHITECTURAL TEMPLATES THEN SELLECT THE ARCHITECT FLOOR OPTION AND CREATE THE FLOOR WITH THE HELP OF RECTANGULAR SHAPE THEN CORRECT THE OPTION
STEP 19 GO TO THE FIRST LEVEL AND SELLECT THE ARCHITECTURAL TEMPLATES THEN SELLECT THE ARCHITECT FLOOR OPTION AND CREATE THE FLOOR WITH THE HELP OF RECTANGULAR SHAPE THEN CORRECT THE OPTION
STEP 20 GO TO THE FIRST LEVEL AND SELLECT THE ARCHITECTURAL TEMPLATES THEN SELLECT THE ARCHITECT FLOOR OPTION AND CREATE THE FLOOR WITH THE HELP OF RECTANGULAR SHAPE THEN CORRECT THE OPTION
STEP 21 GO TO THE 3D VIEW
STEP 22 GO TO THE STRUCTURAL TEMPLATES AND SELECT THE SHAFT OPTION
RESULT
ANSWER NO 4
AIM :Using the architectural model, include the following components based on the type of structure selected
a. Wall Layout with appropriate material and finishing
b. Exterior façade with fancy finish
c. Interior partition walls to size rooms
d. Components to add details to a room ( Desk, Chair, Lighting, Plumbing fixtures)
e. Add components such as stairs Elevators
f. Have at-least one side of the building with curtain walls and glass panels
g. Include interior and exterior lighting fixtures
h. Place proper topographic components from outside ( Trees, Parking, Plants) to add details to the model
PROCEDURE
STEP 1 GO TO THE ARCHITECTURAL TEMPLATES.
STEP 2 IN ARCHITECTURAL TEMPLATES SELELCT THE LEVEL OPTION FOR CREATING THE LEVEL.
STEP 3 GO TO THE LEVEL 1 AND SELELCT THE ARCHITECTURAL WALLOPTION FOR CREATING THE WALL.
STEP 4 GO TO THE ARCHITECTURAL TEMPLATES AND SELLECT THE DOOR OPTION
STEP 5 GO TO THE ARCHITECTURAL TEMPLATES AND SELLECT THE WINDOW OPTION.
STEP 6 GO TO THE 3D VIEW.
STEP 7 GO TO THE MANAGE TAB AND SELLECT THE MATERIALS OPTION FOR Exterior façade with fancy finish.FOR WALL ROOF FLOOR ETC
STEP 8 GO TO THE ARCHITECTURAL WALL AND SELELCT THE INTERIOR WALL FOR CREATE THE INTERIOR ROOM .
STEP 9 TAG THE ROOMS
STEP 10 GO TO THE ARCHITECTURL TEMPLATES AND SELLECT THE COMPONENT OPTION IN COMPONENT OPTION WE ARE SELLECT THR PLACE A COMPONENT OPTION. THEN GO TO THE LOAD FAMILY AND LOAD COMPONENTS LIKE BED, CHAIR, STOOL ,SOFA ,SLEVING ETC.
STEP 11 GO TO THE ARCHITECTURAL TEMPLATES AND SELELCT THE STAIR OPTION THEN SELELCT THE RUN OPTION AND CREATE THE STAIR AND SELECT THE LEVEL AN D CONNECT THE LEVELS AND GO TO THE ELLEVATION VIEW AND SELELCT THE LEVELS AND TICK THE CORRECT OPTION.
STEP 12 0 GO TO THE ARCHITECTURL TEMPLATES AND SELLECT THE COMPONENT OPTION IN COMPONENT OPTION WE ARE SELLECT THR PLACE A COMPONENT OPTION.
STEP 13 GO TO THE ARCHITECTURAL TEMPLATES AND SELELCT THE CURTAIN WALL OPTION FOR CREAING STAIR BOUNDARY.
STEP 14 GO TO THE ARCHITECTURL TEMPLATES AND SELLECT THE COMPONENT OPTION IN COMPONENT OPTION WE ARE SELLECT THR PLACE A COMPONENT OPTION. AND SELELCT THE LOAD FAMILY AND GO TO THE PLANTING OPTION AND SELECT THE PLANTS
RESULT
ANSWER NO 5
AIM: Provide a set of drawings in an architectural and structural model to list the following details with categories and appropriate sheet templates included
a. Floor Plans with Annotations
b. Elevations
c. Sections
PROCEDURE
STEP 1 GO TO THE VIEW OPTION AND SELELCT THE SHEET OPTION. AND PPASTE FLLOR,ELEVATION,3D VIEWS.
ANSWER NO 6
AIM : Using the Rendering settings, Render images of the 3D model produced and include the rendered images to the drawing sheets
a. Rendering from interior rooms
b. Rendering from out showing topographic features
c. Rendering through structural framing
PROCEDURE
STEP 1 GO TO THE VIEW OPTION AND SELELCT TE CAMERA VIEW THEN GO IN DOWN BAR AND SELELCT THE REDIR OPTION FOR BED ROOM
ANSWER NO 7
AIM : Print the set of drawing sheets created and submit the drawings from the architecture and structure model
PROCEDURE
STEP 1 SELECT THE VIEW AND TYPE CTRL+P . AND GO TO THE PDF OPTION AND SET THE PDF NAME AND SAVE IT