Creating a Floor plan, Footing detail and Isometric view using AutoCad
C-1
using line command
1,1
X=.90
Y=.25
X=.2
Y=.40
X=.05
Y=.40
X=.05
Y=.60+.05+1=1.65
X=.30
Y=1.65
CLOSE
LINE
X=1.15
Y=0.15
X=.30
Y=.15
X=.30
USING LINE COMMAND JOIN THE MIDDLE SECTION & TAKE OFFSET OF 0.06 & 0.05
c-2
LINE
1,1
Y=.15
@X=.38, Y=.25 (SLOPE)
Y=1.60
X=.04+.16+.04=.24
Y=1.60
SLOP
Y=.15
X=1
USING OFFSET & LINE COMMAND JOIN THE MIDDLE POTION
C-3
USING POLYLINE
1,1
X=3.60
Y=3.60
X=1.00
Y=.90
X=1.00
Y=.90
X=3.60
CLOSE
USING A LINE OF 1
& GIVE OFFSET OF .30 OF TWO NO'S & DELETE THE TOP LINE
WHICH IS USED FOR REFFERENCE LINE
USING LINE DRAW THE INTERIOR WALL
OF 1.80 & .90
C-4
USING PL COMMAND
1,1
X=.90
Y=.45
X=.15
Y=.40
X=.05
Y=.30
X=.05
Y=.60
X=.05
Y=1
X=.30
Y=1
X=.05
Y=.60
X=.05
Y=.30
X=.05
Y=.40
X=.15
Y=.45
X=.90
C-5
CHANGING TO ISOMETRIC
TAKE LINE COMMAND
1,1
X=1
Y=.15
X=1
Y=.15
Z=.30
BY USING THIS METHOD COMPLETE THE FULL STEPS AT FINAL STEP CLOSE THE LINE USING C COMMAND
C-6
BY USING ISOMETRIC FOLLOW THE STEPS STEP BY STEP BY USING F5 KEY TO CHANGE THE DIRECTION