Creating 3D Isometric view of various structural elements in AutoCAD

1. Design a Warehouse Building located in Chennai using STAAD Pro Connect Edition. The specification must be as follows:      Width  30m Length 50m Eave Height 9m Bay spacing 6m Soil type Medium Safe Bearing Capacity 200 kN/m2 Roof slope 1 in 12 Assume suitable sections for structural elements.…

1. Design a multi-storey Residential Building located in Bangalore using STAAD Pro Connect Edition. The specification must be as follows:      Building floors G + 6 + R Plan dimension B = 25m ,  L = 16m Storey Height h = 3.5m Soil  Hard soil Use Residential Purpose Safe Bearing Capacity 180…

1. 1. State the primary load cases to be considered for design. The primary load cases taht are to be considered for design are  Dead load (IS 875:part I) Live load (IS 872:part II) Wind load (IS 875:Part III) Snow load (IS 875:part IV) Seismic load (IS 1893:2016)     2. What is One – Way slab? One-way…

1. 1. How will you assign Circular section to column?  Open STAAD.pro software Create a new model  Mark the nodes with 10m gap in Y axis Join the nodes by Add beam option Now, click on properties Seelect define parametersas circular column of 500mm radius Assign the circular shape to column      …

1. 1. Write the steps involved to upload a .std file through web mail? Select back import from back stage, The import from STAAD.pro dailouge opens. Click general settings to browse and select a STAAD.pro(*.std) file to import. Select use mapping file in settings and then click to browse the select a mapping file to import.…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim :  To export the revit architectural and structural model to navisworks cache file following export settings.…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve Aim : To create a set of sinusoidal points and create a curve and create a surface out of the curve using dynamo. Procedure : Go to revit and open architectural template and save it Go to manage tab and click…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Aim : To select  a type of structure from          a. Multi-Unit…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level A ceiling is created for both ground floor and first floor using ceiling option in archutectural tab and same material is assigned to these two roofs 2) Model…

TASK : To create a 3 dimensional model of residential bulding To create rendered view of the same model  To add the lighting and material PROCEDURE : We have created a 3d model of residential building  This model is rendered  Materials are added  Light settings are made and rendered view is creted by…

1 ELEVATION B ELEVATION A 2 3 PLAN 4  

1 2 3 4 5

1 2 3  

1 2 3

1 2 3 4 5

AIM To draw reisdential bulding of plot 60'x20' facing east with Architectural Drawing (Floor Plan, Elevations, and Sections) Structural Drawing (Column, Bean, Footing Plan). INTRODUCTION: A G+1 residential building plan is made using autocad with dimensions as mentioned below External walls of thickness 9" Internal walls…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash Aim : To calculate the concrete mix design for M35 grade concrete with fly ash and M50 grade concrete without fly ash. Concrete is made of many ingredients which include cement, admixtures, aggregates…