BMX BIKE Design Using Solid Works 2019

BMX Bike Design .

BMX is the abbreviation for Bicycle Motocross, where the X stands for "cross". A BMX bike has a fairly low frame and a relatively high handlebar that can be rotated once. The impellers have a very small diameter of only 20 inches. The BMX is extremely unsuitable for long distances on the road. But that doesn't make sense either - because this is either about driving a racing course or jumping tricks. So you can quickly see whether a bike is designed for tricks or for speed: A BMX bike with wide pedals and pegs (two bars attached to the front and rear wheels on the right and left) is a trick bike.

RENDER IMAGE OF BMX BIKE

Freatures which are used to create this BMX Bike are:-

Extrude Cut , Extrude, revolve , Revolve cut, linear pattern , circular Pattern, covert Entities, offset entities , fillets, chamfer, slots, mirror, Projected Curves, Reference Planes, swept boss/base , Lofted boss/base, Swept Cut , Visuals , Decals, Rendering etc..

Side View of Bike.

• Link for BMX Bike Assembly File:-

https://drive.google.com/file/d/1q6en9DwXS--KoUic1AGU8Q6Ers8ljZ-X/view?usp=sharing

Components of BMX Bike

1. Frame

It the main part of bike, which support the chain spocket system , pedal etc..

2, Steering.

It is a part which is used to steer the front wheel.

3, Front and rear Wheel.

Front Wheel

Rear Wheel.

.

4, Sprocket with Pedal.

5, Pedal.

6, Pin.

7, Seat.

8, Chain.

Chain Detail..

9, Radial Ball Bearing.