Assembly of Yacht
YACHT DETAILED REPORT
Objective
The objective of this project is used to create a surface model of the different parts of the yacht using the solid works software.
To assemble the different parts of the yacht are also created by the solid works software.
Part Modelling
Part modelling is used to create a part by using the conceptual sketch through the solid based features, as well as build and modify parts through the direct graphical manipulation.
Surface Modelling
The surface modelling gives you the ability to build out a visual representation of an original structure of the exterior parts. In other words, we can call it is a surface.
Surface modelling plays a major role in modelling for this yacht. Most of the parts in the yacht are surface modeled.
Loft Surface
Loft surfaces are also the one of the surfaces which is used to generate to multiple curves or existing edges creating a smooth tangency between the selected curves.
Sweep Surfaces
Sweep surfaces are surfaces that are generated by using the section curves positioned along a path.
Filled Surface
The filled surface feature is used to constructs a surface patch with the many number of sides, within a boundary defined by existing model edges, sketches or curves including composite curves.
Surface Trim
The surface trim is used to keep or remove surfaces from the particular intersecting surfaces. There are two modes of Standard and Mutual.
Extend Surface
Extend surface is used to extend the surface by selecting the edges which is already created. There are different options available on the extended surface.
We can extend the surface as same surface or we can the extend tangential surface.
Surface Knit
Surface knit is used to knit the two free edges/open edges of the surfaces together. Also, it reduces the gap between the two edges of the surface.
Flow chart of the Yacht Assembly:
Parts to be modelled for chopper:
The following parts of the yacht are modelled in solid works are assembled together.
1.Propeller
2.Radar
3.Blue Print
4.Hull
5.Garade Door
6.Front Seat
7.Middle Seat
8.Rear Seat
9.Super Structure
10.Radar Mast
1.Propeller
A Propeller is a fan mechanism that transmits from power by converting the rotational motion into thrust to move the yacht. Usually it consists three or more blades.
Using Features
Sketch
Revolve
Cut Extrude
Loft
Fillet
Circular Pattern
Sketch
Sketch is a two-dimensional representation of the model with respect to the plane from the outside of the mode.
Revolve
The revolve is a feature which is used to adding material by its cross-sectional sketch. By the center axis we can make the revolve.
Circular Pattern
Circular pattern is used to create a blade of the propeller. By using this circular pattern to make the blades easily.
Loft
Loft are surfaces generated by multiple 3D curves or existing edges creating a smooth tangency between the selected curves.
2.Radar
Marine radars are X band or S band radars on ships, used to detect other ships and the obstacles inside or outside the sea.
Using Features
Sketch
Extrude
Mirror
Cut Extrude
Fillet
Sketch drive Pattern
Extrude Cut
Extrude Cut is a one of the cool features which helps to remove materials from the 3D model.
Mirror
By using this mirror faces with a mid-plane selected only the chosen faces within the revolve will be mirrored.
3.Hull
A hull is the watertight body of a ship or boat. The hull may open at the top or it may be fully or partially covered with a deck.
The hull is big part of the yacht.
Using Features
Sketch
Project Curve
Swept Surface
Loft Surface
Extruded Surface
Extend Surface
Surface Knit
Extrude
Mirror
Cut Extrude
Fillet
Pattern
Split
- Garage Door
Garage door is used to close the garage part in hull.
Using Features
Insert
Shell
Text
Split
5.Front Seat
Front seat is placed on the front part of the hull.
Using Features
Sketch
Project Curve
Swept Surface
Loft Surface
Rule Surface
Extend Surface
Surface Knit
Extrude
Mirror
Cut Extrude
Fillet
Pattern
- Middle Seat
Middle seat is placed under of the superstructure. The middle seat is placed Middle of the Hull.
Using Features
Sketch
Extrude
Chamber
Fillet
7.Rear Seat
Rear Seat is a placed end of the hull.
Using Features
Sketch
Project Curve
Swept Surface
Loft Surface
Ruled Surface
Extend Surface
Surface Knit
Extrude
Mirror
Cut Extrude
Fillet
Pattern
8.Superstructure
Superstructure means to add a construction to an already existing structure. In ships this is the name given to the part of the ship that emerges from the deck surfaces.
Using features
Sketch
Project Curve
Swept Surface
Loft Surface
Extruded Surface
Extend Surface
Fill Surface
Surface Knit
Surface Trim
Delete Surface
Extrude
Mirror
Cut Extrude
Fillet
Pattern
Split
9.Radar Mast
Using Features
Sketch
Extrude
Revolve
Sweep
Cut Extrude
Fillet
Assembly
The parts of the yacht are inserted into the assembly environment.
The possible mates’ conditions are given to the yacht and the yacht is assembled.
Conclusion
The parts of the yacht are modeled.
The parts of the yacht are assembled.
The rendering of the yacht is completed successfully.