Assembly of Yacht
https://drive.google.com/drive/folders/10xRbKoZavY2EALlBzg0m1lFjSCop-7ye?usp=sharing
Project Report
MODELLING SUNSEEKER PREDATOR YACHT
AIM
To gain knowledge on solid, surface modelling and assembly, rendering tools by modelling a photorealistic sunseeker yacht using solid works and photoview 360.
OBJECTIVES
To build all the parts of a Yacht by using solid and surface modelling tools and to assemble the multiple parts into a single yacht by assembling and rendering them more realistic by using photoview 360.
Components of yacht
- Propeller
- Radar
- Hull
- Garage Door
- Front Seat
- Middle Seat
- Rear Seat
- Superstructure
- Radar Mast
Procedure
Features used commonly
- Sketch
It is a 2D drawing used to define the shape and profile of the required solid
- Surface Extrude
It is used to create a 3D surface as in the sketch
- Extrude
It is used to create a solid body from a 2d drawings
- Extrude cut
It is used to create a hole or delete the solid bodies
- Surface Extend
It is used to extend the surface
- Surface Trim
It is used to delete or trim the unrequired surface
- Fillet
It is used to make sharp edges into a smooth edge
- Knit Surface
It is used to reduce the gap between two surfaces
- Mirror
It is used to create an exact body with reference axis
- Loft
It is used a body or surface between two different sketches.
Propeller
A propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral. It transforms rotational power into linear thrust by acting upon a working fluid such as water or air.
Feature used
- Sketch spline
- Revolve
- Reference Geometry
- Loft
- Fillet
- Extrude Cut
- Circular Pattern
CAD model
Rendered model
Radar
A radar device acts as a major navigation aid for boaters. It helps in detecting boats, birds, landmasses, and weather systems - even if the visibility is less than usual.
Feature used
- Sketch
- Extrude
- Fillet
- offset entities
- Pattern/Mirror
- Cut Extrude
- Text
- Split Line
CAD model
Rendered model
Hull
A hull is the watertight body of a ship or boat. The hull may open at the top or it may be fully or partially covered with a deck. A top the deck may be a deckhouse and other superstructures, such as a funnel, derrick, or mast.
Feature used
- Blueprint setup
- Sketch
- Projected Curve
- Surface Loft
- Surface Trim
- Surface Extrude
- Surface Knit
- Surface Fill
- Shell
- Fillet
- Pattern Feature
- Boss Extrude
- Chamfer
- Sweep
- Split Body
CAD model
Rendered model
Garage door
The garage door is used to close the garage space.It also protects the vehicle from the bad weather.
Feature used
- Sketch
- Extrude Cut
- Shell
- Fillet
- Mirror
- Text
CAD model
Rendered model
Seat
The seat is used to take rest and make some relaxation.It is made up of some good leather covers.
Feature used
- Sketch
- Surface Sweep
- Surface Offset
- Ruled surface
- Surface Knit
- Surface Extend
- Surface trim
- Surface Extrude
- Surface Loft
- Chamfer
- Fillet
- Sweep
- Mirror
- Revolve
- Dome
Front seat
CAD model
Rendered model
Middle seat
CAD model
Rendered model
Rear seat
CAD model
Rendered model
Superstructure
A superstructure is an extended construction of any building or platform that rises above the rest of the building or platform in a distinct manner. It is a control tower of the yacht, it is the operational center for all the activities on the vessel, and it is also the work station of a majority of the technical staff.
Feature used
- Sketch
- Surface Extrude
- Surface Sweep
- Surface Knit
- Fillet
- Ruled Surface
- Surface Trim
- Surface Loft
- Surface Extend
- Boss Extrude
- Dome Feature
- Sweep
- Extrude Cut
- Chamfer
- Project Curve
- Mirror
CAD model
Rendered model
Radar Mast
Radar mast is used to detect other ships and land obstacles, to provide bearing and distance for collision avoidance and navigation at sea.
Feature used
- Sketch
- Boss Extrude
- Fillet
- Revolve
- Sweep
- Project Curve
- Chamfer
- Mirror
- Dome
CAD model
Rendered model
Assembly of Yacht
Each and every part of the Yacht is successfully completed and the parts are assembled with each other in a proper way to describe the structure of yacht using solidworks assembly feature.
Rendering
Rendering is used to provide the image of the yacht in different environmental conditions with different views. Here the rendering is carried out using photoview 360.
Isometric View
Front View
Back View
Right View
Left view
Top View
Bottom View
Conclusion
Thus, the modelling of the Sunseeker Predator Yacht is successfully completed using different tools in solidworks and the photorealistic view of the yacht is done by using photoview 360.