Sheet Metal Casing Design as per Manufacturing Requirement using NX-Cad.
Project Objective: In this Project, I am going to Design Sheet Metal Casing Flange, Bend Angle, Holes, Drip Dimple, and Sheet Thickness as Per Manufuactruing Requirement using NX-Cad.
01. Manufacturing Requirements:
Sheet Size = 60mm X 50mm X 1mm(thickness).
Flange length = 5mm
Band angle = 90 Degree
Dimple Depth = 1mm
02. Part Navigators:
Sketch
Tab
Normal Cut
Rebend
Flange
Mirror Feature
Break Coner
Hole
Unbend
03. Casing Design View:
04. Flate Pattern Draft:
05. Final Design:
06. Google Drive Module Links:
https://drive.google.com/file/d/1mg1f-Jki5ZfcGWXZFXAvGkVwz5YCFORb/view?usp=sharing
https://drive.google.com/file/d/1mg1f-Jki5ZfcGWXZFXAvGkVwz5YCFORb/view?usp=sharing
07. Conclusion:
Thus, I Learn in this Project selection of sheet metal thickness, Flange length, Dimple Depth, Hole, and Bend Angle as per Manufacturing Requriment using NX-Cad.
Thanks & Regard
Rajnish Kumar