Tool Test 2

Aim:- To perform a volume mesh for the given component under given quality criteria.

Import the given intake manifold.igs

Cleanup geometry

1. Apply toppo

2.Under mesh module change perimeter length and micros 1mm

3. Check the geometry for errors, error like triple cons ,Needle faces are fix using right click.

Generating tria mesh with given quality criteria

S.No	Quality Criteria	Value
1	Target/Average length	5
2	Minimum Length	3
3	Maximum Length	7
4	Tetcolapse	0.2

1.Set quality criteria and mesh parameters by given condition.

2 To create mesh by spot and best and free mesh method in mesh menu.

3. Use reconstruct , Reshape and smooth option to better mesh flow.

4.Use ortho tria mesh for curved surface and tria mesh for flat surface.

After tria and ortho tria mesh check for geometry error and set the quality criteria.

To generate tetra FEM mesh go to volume mesh module define volume by manual selection then go to list option to assign the property and Remesh.After creating volume mesh set pid for solid components.

For checking the tetcolapse enable hidden mode to see off elements. To eliminate Off elements using command move free and moving inside of volume mesh and fixQuality to remove off elements so that there will be kinks and dips.

conclusion:- In this project we learn adout how to do volume meshing and how to eliminate tetcolapse with using fix quality smooth and Reconstruct comman in volume mesh.

https://drive.google.com/drive/u/0/my-drive