Roof Crush - BIW Import • Car• Impactor Transforms • This will require (in order)• A 180° rotation about the global z-axis• A 5° rotation about the axis through axis AB• A 25° rotation about the axis through axis AC• A translation to put point A at global ( -3250.00, 584.822,…
Bhargav Avinash Gurrala
updated on 07 May 2020
Project Details
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Read more Projects by Bhargav Avinash Gurrala (18)
Week - 10 Hyperelastic Material Models
HYPERELASTIC MATERIAL MODEL CREATION AND VALIDATION Objective: In this project a MAT_77 Hyperelastic material has to be created using the given data, obtain Mooney Rivlin and Ogden material constants and using the extracted…
08 Jul 2020 07:50 AM IST
Mass Scaling
MASS SCALING Objective: The purpose of this project is to increase the timestep thereby reducing…
04 Jul 2020 06:01 AM IST
Material modelling from raw data
Material Modelling from Raw data Objective: The aim of this project is to extract (stress and strain) data from a curve and find the yield…
04 Jul 2020 06:00 AM IST
Comparison of Spotweld Crash Analysis performed with Beam and Solid Elements in LS-DYNA
Comparison of Spotweld Crash Analysis performed with Beam and Solid Elements in LS-DYNA Objective: The aim of this project is to model spotwelds with beam and solid elements, perform a crash test and compare both the results for different parameters: Axial and Shear forces for beam and solid elements Cross sectional…
31 May 2020 05:23 AM IST
Comparison of Crash Box Analysis using different shell thickness
Comparison of Crash Box Analysis using different shell thickness Objective: The aim of this project is to analyse the crash analysis of box with different shell thickness and compare the different parameters as follows Cross sectional forces…
25 May 2020 06:56 AM IST
Mathematical Analysis of a Bar under Tension using Explicit and Implicit Method
Objective: A bar under tension is to be solved using Explicit and Implicit approach with the force in the bar being a non-linear function of the displacement. What does Finite Element Analysis involve: Generally,…
10 May 2020 11:29 PM IST
Mathematical Analysis of a Bar under Tension using Explicit and Implicit Method
Objective: A bar under tension is to be solved using Explicit and Implicit approach with the force in the bar being a non-linear function of the displacement. What does…
09 May 2020 02:13 AM IST
Roof Crush Analysis of Neon BIW in Hypermesh with Radioss
Roof Crush - BIW Import • Car• Impactor Transforms • This will require (in order)• A 180° rotation about the global z-axis• A 5° rotation about the axis through axis AB• A 25° rotation about the axis through axis AC• A translation to put point A at global ( -3250.00, 584.822,…
07 May 2020 10:37 PM IST
Consistency of Units
Objective: The objective of this challenge is to convert the given SI unit values of the given quantities to gm/mm/ms units and also to prepare cosistent unit system table for different unit system. Before converting the given values into different unit system the definitions of Fundamental quantities and the derived quantities…
06 May 2020 02:47 AM IST
Consistency of Units
Objective: The objective of this challenge is to convert the given SI unit values of the given quantities to gm/mm/ms units and also to prepare cosistent unit system table for different unit system. Before converting the given values into different unit system the definitions of Fundamental quantities and the derived quantities…
06 May 2020 02:46 AM IST
Editing Engine file and performing 2D and 3D Meshing of the components using Hypermesh
## Comments by Grader while editing the engine, oe has to followup the equal number of decimal places throughout the file. Also in 3D meshing of the bracket, there should not be any rotating quads in the model which will disrupt the whole mesh flow. hence, avoid them. ## Objective: Calculate the speed of the sound in steel…
26 Apr 2020 04:04 AM IST
Side Crash Analysis of Neon BIW using Radioss solver
Objective: It is of interest to perform a side crash analysis of Neon BIW creating a Type7 contact of the whole body with friction as 0.2 following the recommended properties. Initial velocity of 35mph with a friction of 0.1. Rigid Wall of Cylindrical geometry type to resemble a Pole. Cross sections at the cross…
21 Apr 2020 01:03 PM IST
Frontal Crash Analysis of a Neon BIW in Radioss
Objective: To perform Frontal crash impact analysis of the given Neon BIW model by Checking the unit system and create interfaces with frictional force of 0.2 with the recommended properties and check for any penetrations &intersections and remove if any. Creation of initial velocity and rigidwall with a friction…
17 Apr 2020 05:25 PM IST
Comparison of the Base Setup with the Recommended element properties simulation results of a crash beam
Objective 1.Change the run time to 55 ms of the crash beam. 2.Change the number of animation steps during simulation to a minimum of 25 and maximum 603.Run the base simulation without any modification to element properties.4.At the end of the simulation, do the energy error and mass error checks and determine whether…
17 Apr 2020 08:15 AM IST
Comparing how applying different material laws affect the Rupture Plate model
Objective: Perform case studies by applying different Material law properties on the Rupture Plate and record and compare the test results, thereby deciding which law is best for a given scenario. CASE1: Replace the given model name FAILURE_JOHNSON_0000 of the starter input file with Law2_epsmax_failure_0000.rad.…
17 Apr 2020 08:15 AM IST
Geometry Cleanup and Meshing of 2d Shell element models using Hypermesh
Objective: 1.To clean the geometry 2.To extract the midsurface out of the given geometry 3.To cleanup the midsurface 4.To make necessary changes as required for achieving a better model 5.To mesh the model maintaining the given range [3.5:5:7]mm as required and assigning appropriate thickness and property Procedure:…
17 Apr 2020 08:15 AM IST
Comparison of different case setups and results of Crush Tube model conducted in Hypermesh
Objective: Create the mesh for bumper assembly,mesh size should be 6mm. Case1: Run the crash tube model without any changes. Case2: Make changes to the last model by changing the Inacti=6 Case3: Create a type 11 contact keeping all the conditions of the case2 Case4: Remove both notches and remove boundary condition…
08 Apr 2020 03:52 AM IST