SURFACE MODELING OF YACHT

MODELING OF YACHT

AIM & OBJECTIVE:-

• To apply different tools of surfacing in SolidWorks.
• Make a model of the yacht using Solidworks.
• Do assembly and rendering using Solidworks.

INTRODUCTION:-

SolidWorks is a mechanical 3D CAD (Computer-Aided Design) Software used to create 2D & 3D models. It helps to design products better, faster, and more cost-effectively.

Yacht modeling completely depends on surface modeling. In this modeling the most important part to set up the Blueprint. Then as per the requirement of parts in blueprint do the process to get the desired part.

COMMON TOOLS USED IN YACHT MODELING

• PLANE:- Here the section view of the model is to be sketched

• SKETCH:- It gives the work base to create 2D & 3D sketches.

• SMART DIMENSION:- By using this easy to provide the dimension value to the sketch to get the desired shape.

• FILLET:- It provides round shape at corners edges.

• CHAMFER:- It provides sloping edges at corners.

• EXTRUDE SURFACE:- Used to get surface from the sketch.

• REVOLVE SURFACE:- Used to revolve the sketch with the reference of axis or lines in the surface form.

• SWEPT SURFACE:- It proved a surface by closed profile along an open and closed path.

• OFFSET SURFACE:- Used to get pre surface on another plane.

• KNIT SURFACE:- Used to provide appropriate tolerance.

• EXTEND SURFACE:- Used for extension of surface.

• FILLED SURFACE:- Used to fill the blank surface.

• CONVERT ENTITIES:- Using this easy to get sketched into the other plane or same plane with the same dimension value.

• OFFSET:- It Adds 3D sketches on faces.

• EXTRUDE BOSS/BASE:- used to get a solid body in one or two directions.

• REVOLVED BOSS/BASE:- Used to revolve the sketch with the reference of axis or lines in the solid form.

• EXTRUDE CUT:- Used to remove materials from the solid body.

• SWEPT BOSS/BASE:- It proved a solid body by closed profile along an open and closed path.

• PATTERN:- It features the object in a particular direction or path

• PROJECTED CURVE:- It combines two 2D Continuous curves into a 3D curve.

• TRIM:- It is used to cut the extra line of the surface.

• APPEARANCE:- Using this can get a different look & apply different materials.

• SHELL:- The shell tool hollows out a part.

• DECALS:- Using this tools painted stickers to be applied.

• VIEW (HEADS-UP):- Following command comes under this:-
• Zoom to Fit
• Zoom to Area
• Previously view
• Section view
• View orientation
• Display style
• Hide Item

COMPONENT OF YACHT

• Blueprint Setup
• Propeller
• Radar
• Hull
• Garage Door
• Rear Seat
• Front Seat
• Middle Seat
• Superstructure
• Radar Mast
• Final Assembly of Yacht

BLUEPRINT SETUP

Following steps need to get the setup:-

Go to ToolS Then Sketch Tools Then Sketch picture and browse the picture location file and click on OK. Then give properties data to get the exact setup.

PROPELLER:-

Its rotary motion through the air creates a difference in pressure between the front and back surfaces of its blades. It provides thrust so that the yacht moves easily.

RADAR:-

It is used to detect the object’s position, signals, etc. relative to the position of the yacht.

HULL:-

It is the watertight enclosure of the ship, which protects the goods carrying area, machinery, and accommodation spaces of the ship from the weather, flooding, and structural damage.

GARAGE DOOR:-

It provides safety from bad weather, Moisture, etc.

SEAT:-

It is used for the purpose of rest. It is also an important part of the superstructure.

SUPERSTRUCTURE:-

A superstructure is an upward extension of the Yacht. It is like a head & gives a pretty good look and mounted over the hull. By the Base Isolation whole yacht can be protected from severe damage.

RADAR MAST:-

It is the complete assembly of the radar system which protects from the harmful things.

ASSEMBLY OF YACHT:-

In the assembly part, all individual parts inserted into assembly tools of Solidworks. Fix one of the components into the work base. Proved mates and relation reaming part to the fixed one with respect to line, vertex & planes.

RENDERING:-

It is a very important part because of different materials, colors, etc to be applied to assembly one. Here, the product to be seen under environmental conditions with different views. It gives a realistic view of the model relative to the environment.

THANK YOU