Design and Rendering of American Chopper

DESIGN AND ASSEMBLY OF YACHT OBJECTIVE To design and assemble various parts of a Yacht using SolidWorks software INTRODUCTION SolidWorks is a solid modeling computer-aided design and computer-aided engineering computer program that runs primarily on Microsoft Windows. SolidWorks is published by Dassault Systèmes.…

1.Oil Tank -First draw a horizontal line on the Top Plane then draw two other lines from the ends of the first lines.After that draw a 3 point arc connecting the two lines.-After that extrude the figure using Extruded Boss/Base tool.-Now draw another sketch of a quadrilateral on the Midplane and the extrude that too with…

1.Gas Tank -First, the Underlay image of the chopper is added to the midplane. -Then a plane is created with respect to the front plane. -After that, a sketch is drawn on the newly created plane and the midplane and is used to create a swept surface using the Sweep Surface tool. -Now another sketch is drawn on the Bottom…

1.Chassis   -First, add the blueprint sketch picture to the midplane. -Then draw a curve on both the Bottom plane and the midplane and then using the projected curve tool to make a projected curve. -After that draw, another sketch on the right plane and again using the projected curve make a curve. -Now using the…

1.Rear Wheel -First, draw a shape on the front plane so that it can be revolved at a particular axis to form the rim of the rear wheel and the shaft of the rear wheel. -After that on the right plane draw an arc using the 3 Point arc tool and make a shape and then it is extruded at a particular distance from the middle…

Design and Rendering of American Chopper AIM To learn different techniques of solid as well as surface modelly using Solidworks by designing an American Chopper INTRODUCTION SolidWorks is a solid modeling computer-aided design and computer-aided engineering computer program that runs primarily on Microsoft Windows. While…