American chopper

create “Bracket” from the given 2d Drawing.   Design methodology / approach CONTOUR FLANGE COMAND is used to make first base NORMAL CUTOUT is used to remove extra portions break corner used to remove sharp edges ADVANCED FLANGE command used to make flange at curved edges HOLE comand is used to make holes…

Title of the Project Objective create “Bracket” from the given 2d Drawing.   Design methodology / approach CONTOUR FLANGE COMAND is used to make first base NORMAL CUTOUT is used to remove extra portions break corner used to remove sharp edges after UNBEND COMAND we can add BEADS HOLE comand is used to…

Sheet Metal part for odd shapes Objective design a‘Sheet Metal part for odd shapes’ using Siemens NX Sheet Metal Application. Introduction    Design methodology / approach recommended workflow Description (Need to explain tools/ Features used while designing) extrude extrude command used in modelling…

Points to be followed in repor Box Assembly’ using Siemens NX Sheetmetal Application. Objective design a ‘SheetmetalBox Assembly’ using Siemens NX Sheetmetal Application. Design methodology / approach Description tab flange close corner hem mirror body unite dimple unbend and rebend bead mirror feature…

CASING DESIGN   Objective design a ‘Sheet Metal Casing’ using Siemens NX Sheet Metal Application.   Design methodology / approach  Recommended workflow to create a simple part Sketch the shape Sketch the shape of the base feature, or use an existing sketch or section. Construct the base feature…

Modern Automotive Coating Processes Modern automotive coating methods consist of five main steps. They include the following: Pretreatment: removes and cleans excess metal and forms an appropriate surface structure enabling bonding of a corrosion protection layer. The next step is electrodeposition (ED) of the anti-corrosion…

janish

    https://drive.google.com/open?id=1jJazdeBN61k9Qx9nAn8pJlQNBTKfJ3zV

                                    OBJECTIVE Development of a Door Trim panel   Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness : Refer master sections…

Draft analysis Draft analysis is done inorder to check the manfacturability of the component. For plastic produc design, a small draft angle given to component surfaces inorder to ease the ejection of component from the mold. Draft analysis check the draft angle of different surfaces of the component along the tooling…

Draft analysis Draft analysis is done inorder to check the manfacturability of the component. For plastic produc design, a small draft angle given to component surfaces inorder to ease the ejection of component from the mold. Draft analysis check the draft angle of different surfaces of the component along the tooling…

DRAFT ANALYSIS Draft analysis is done inorder to check the part designed is manufacturable or not. if the designed component contain 90 degree wall or other obstruction aginst tooling axis it will create friction in mold wall and component while ejecting, designers try to avoid side cores inorder to reduce the cost of…

Draft analysis Draft analysis is done to check weather the designed part is toolable or not. because in order to release the component  from the the tool . a small draft angle is necessery. draft analysis check the component surfaces based on the draft condition applyed and tooling axis provides while designing the…

https://drive.google.com/drive/folders/1SFYEmPjpy0CJ81bgrAJpahpo-ieF4Urf?usp=sharing