Challenge

3D Creation of Ceiling, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

Aim: to model a ceiling from the architectural tab above the walls at the first floor level:

Step by step procedure as follow:

Aim: to model a roof above the r ceiling level and adjust the slope at 10 degree

Step by step procedure as follow:

Open the architecture toolbar, and select the Roof by Footprint option
Next we select the roof and adjust the roof to 10 degrees by selecting from properties browser

Aim: to create a plan view for ground floor level and first floor plan seperate them to architectural and structural plan

Step by step procedure as follow:

First we draw the architectural palns of first floor and second floor.
Next we draw the structural palns of the first floor and second floor.
Created plan views for ground floor level and first-floor level including all the walls, floors, and components.
And separated them to architecture and structural plans.

Aim: to using annotate toolbar add dimension to all walls and floors

Step by step procedure as follow:

And add the dimensions to the Structural plans.
The dimensions are added to the structural floor plans and the architectural floor plans.
And the longitudinal and transverse grids are also created in the project file.

Aim: to create a sheet template from the view tab

Step by step procedure as follow:

First we click on the sheet option from the view toolbar, as shown below.
After clicking the sheet, Thhe new tab will be visible on the screen.
In that new tab we select the A1 metric, then the sheet template will be displayed.

In the sheet template we insert the first floor plan and second floor plan separately
Next edit the Project name and the sheet number .
Created a sheet template from the view tab and adjusted the parameters on the sheet for adding appropriate views

Aim to using elevation tab created elevation views

step by step procedure as follow:

Aim: to produce section cut through each room either cutting across longitudinal or in a transverse direction

Step by step procedure as follow:

Aim: to using the sheet template produced create multiple sheets as given

Step by step procedure as follow:

Step:-1

First we produce the Ground floor architectural plan in the sheet template A-101
Next we produce the First floor architectural plan in the sheet template A-102
Next we produce the Roof plan in the sheet template A-103
Next we produce the Ground floor structural plan in the sheet template S-101
Next we produce the First floor structural plan in the sheet template S-102
Next we produce the Roof framing plan in the sheet template S-103
Next we produce the North and south elevation views in the sheet template A-201
Next we produce the East and West elevation views in the sheet template A-202

Aim: to create a camera- specific view or 3D view in each room and based on views create a new sheet

Step by step procedure as follow:

go to the floor plan and place the camara in the bed room, and the camera view of bed room.
take the sheet and name it as A-501
Next go to the floor plan and place the camara in the Kitchen room, and the camera view of kitchen room
Take the sheet and name it is A-502
Next go to the floor plan and place the camara in the Living room, and the camera view of Living room
Teke the sheet and name it is A-503

Ship work like this
in your own course.