FEA engineer salary in India: what FEA and CAE freshers are offered

FEA is the most common simulation job title in Skill-Lync's records, and one of the lower-paid starts. Across 339 placements with an FEA, CAE, meshing, crash, NVH or durability title, freshers averaged 3.2 LPA, with the middle half between 2.8 LPA and 3.5 LPA, and experienced hires averaged 4.5 LPA.

Updated 21 Nov 2026 · Skill-Lync placement records: 339 placements, 307 with a disclosed salary, 2020-2026 (latest 2026-11-07) · Starting offers, not a market survey

3.2 LPAaverage fresher offer, middle half 2.8 LPA to 3.5 LPA (n = 179)
4.5 LPAaverage offer for experienced hires (n = 28)
6%of all offers were 5 LPA or more; 27% were under 3 LPA
113different employers in these records

What salary does an FEA engineer fresher get in India?

In Skill-Lync's placement records (as of 21 Nov 2026), FEA engineer freshers in India were offered 3.2 LPA on average (n = 179), with the middle half of offers between 2.8 LPA and 3.5 LPA. Experienced hires averaged 4.5 LPA (n = 28). About 96% of these records are from 2021 to 2023, so read them as the usual starting band, not as this year's exact figure.

All 307 disclosed FEA engineer offers (freshers, experienced and unmarked), in lakh per annum. Source: Skill-Lync placement records, 21 Nov 2026.

What does an FEA engineer do?

An FEA engineer uses finite element analysis to predict how a part or a whole vehicle behaves under load: will a bracket crack, how much does a door sag, how does a car body crumple in a crash, how loud is a cabin at 100 km/h. The part is cut into thousands or millions of small elements, loads and supports are applied, and a solver such as Abaqus, Nastran, OptiStruct, Ansys Mechanical, LS-DYNA or Radioss works out stresses and deflections.

Most fresher work is pre-processing: cleaning CAD geometry and building a quality mesh in HyperMesh or ANSA, which is why meshing engineer is a job title of its own. Then come connections (welds, bolts, adhesive), material cards and load cases, followed by checking results against hand calculations or test data. Work is split by domain: linear static and durability, crash and safety, and NVH (noise, vibration and harshness).

Which FEA engineer job titles pay more?

Job title groupPlacementsAverage offerMiddle half (LPA)
FEA / CAE engineer2283.4 LPA3.0 to 3.7
FEA / CAE trainee752.9 LPA2.4 to 3.3
Meshing / ANSA engineer333.8 LPA3.0 to 4.2

Job titles grouped by keyword (a title counts in the first group whose keyword it contains). Groups with fewer than 20 disclosed offers are left out. Middle half = 25th to 75th percentile of offers.

Which companies hire FEA engineer freshers, and what do they pay?

The biggest hirer in these records was Cyient (35 placements, 22 marked fresher). Most of the volume is at engineering services companies such as Cyient, Xitadel, Expleo, Tata Elxsi and ALTEN, which run simulation for vehicle and aircraft makers. ARAI, the Automotive Research Association of India in Pune, averaged the most, but only one of its placements was marked fresher. Pay differs more between employers than between cities.

EmployerPlacementsFreshersAverage offerMiddle half (LPA)
Cyient35223.3 LPAmostly 3.3
Xitadel29172.9 LPA2.8 to 3.1
ARAI1614.6 LPA4.2 to 4.5
Expleo13113.3 LPA3.0 to 3.5
Tata Elxsi1173.5 LPA3.2 to 3.6
ALTEN1063.2 LPA2.6 to 3.7
Safran1033.6 LPA3.4 to 3.8

All 7 employers with at least 10 disclosed offers, out of 113 employers. When the average is above the middle half, a few higher offers are pulling it up; the middle half is the typical offer. Employer spellings are merged; Skill-Lync's own hires are left out. Every employer, with roles, cities and recent hirers: companies hiring FEA engineer freshers.

Which city pays an FEA engineer more?

230 of the 339 placements name exactly one job city. Pune had the highest average and Hyderabad the lowest, a gap of 0.5 LPA.

CityPlacementsAverage offerMiddle half (LPA)
Bangalore633.2 LPA2.8 to 3.6
Pune623.6 LPA3.0 to 4.2
Hyderabad513.1 LPA3.0 to 3.3
Chennai453.3 LPA3.0 to 4.0

City by city, with employers and courses: Bangalore, Pune, Chennai, Hyderabad.

How much more do experienced FEA engineers earn?

In these records, offers to experienced hires averaged 4.5 LPA against 3.2 LPA for freshers, 1.4 times as much. The middle half of experienced offers ran from 3.4 LPA to 5.0 LPA. "Experienced" means the learner already had work experience when placed; the records do not say how many years, so read it as a second or third job, not a senior salary.

196 placements are marked fresher, 34 experienced and 109 not marked.

Has the starting salary changed over the years?

Hiring in these records peaked in 2022 (195 placements). Only 8 are from 2024 onwards, so year-to-year changes in the later years rest on small samples.

YearPlacementsAverage offerMiddle half (LPA)
20206under 20 offers–
2021823.1 LPA2.6 to 3.4
20221953.4 LPA3.0 to 3.6
2023473.7 LPA3.0 to 4.2
20245under 20 offers–

How can a fresher get a higher starting offer?

  1. Get out of the trainee band fast. FEA and CAE trainee titles averaged clearly less than FEA and CAE engineer titles in these records. Ask how long the trainee period lasts and what the CTC is after it before you compare two offers.
  2. Mesh quality is the entry ticket. Meshing engineer titles averaged the most of the three groups here, but almost half of them were at one employer, ARAI, so read it as 'good meshers get hired', not as a market rate. A portfolio with a clean BIW or plastic-part mesh that meets quality criteria (aspect ratio, warpage, Jacobian) is what interviewers open first.
  3. Pick a domain: crash, NVH or durability. Generic linear static work is where most fresher offers sit. Crash (LS-DYNA, Radioss) and NVH titles are rarer in these records and need more physics, which is where the pay moves later.
  4. Pune paid FEA freshers the most. Pune had the highest average of the four cities with enough offers and Hyderabad the lowest, but the gap between employers was bigger than the gap between cities.

What these numbers don't tell you

Almost all of these records are from 2021 to 2023, the years when Skill-Lync's CAE programs placed the most people, so read them as the usual starting band rather than a 2026 figure. Much of the volume comes from a few engineering services firms, the experienced average rests on only 28 offers, and nine fresher-role offers between 12 and 25 LPA, far above the rest, are treated as entry errors.

They are also offers that learners reported, not payslips: the figure is usually the CTC (cost to company) on the offer letter, which includes parts you do not get as monthly take-home pay. And they say nothing about how many people did not get placed; this is not a placement rate.

Skill-Lync courses for FEA engineer roles

Fees as listed on each course page on 21 Nov 2026. Most placements on this page came from these programs. They include career services but no job guarantee. See also FEA courses, fees and jobs.

FEA engineer salary: FAQs

What is the salary of an FEA engineer fresher in India?

In Skill-Lync's placement records (as of 21 Nov 2026), FEA engineer freshers in India were offered 3.2 LPA on average (n = 179), with the middle half of offers between 2.8 LPA and 3.5 LPA. Experienced hires averaged 4.5 LPA (n = 28). These are offers learners reported, mostly from 2021 to 2023.

Which companies hire FEA engineer freshers?

The most frequent employers in Skill-Lync's FEA engineer placements were Cyient (35), Xitadel (29), ARAI (16), Expleo (13), Tata AutoComp (11). Among employers with at least 10 disclosed offers, the highest averages were at ARAI (4.6 LPA), Safran (3.6 LPA), Tata Elxsi (3.5 LPA).

Which city pays an FEA engineer the most?

Of the cities with at least 20 disclosed offers in these records, Pune averaged 3.6 LPA, Chennai averaged 3.3 LPA, Bangalore averaged 3.2 LPA, Hyderabad averaged 3.1 LPA. The differences are small next to the differences between employers.

Why do FEA freshers earn less than CFD freshers?

In Skill-Lync's records FEA-titled freshers averaged 3.2 LPA, below CFD freshers. One likely reason is volume: large engineering services teams hire FEA freshers in batches for meshing and pre-processing at a fixed trainee CTC, while CFD hires fewer freshers, often for more specialised roles.

Is FEA a good career in India?

Yes, if you plan for the second job. FEA freshers in these records averaged 3.2 LPA and 27% of offers were under 3 LPA, but experienced FEA hires averaged 4.5 LPA. The jobs are steady at automotive and aerospace engineering services firms, and pay rises with domain depth in crash, NVH or durability.

How these numbers were counted

From Skill-Lync's placement records as of 21 Nov 2026 (the same records listed on recent placements): placements in the CAE, CFD, Mechanical, Design domains whose job title says FEA, CAE, finite element, meshing, ANSA, crash, NVH or durability, or starts with analysis engineer. Within one job title the pay band is tight, so an offer above 3 times the median (9.9 LPA here) is treated as an entry error and its salary left out (9 offers); the placement still counts. Salaries are offers in lakh per annum (LPA) that learners reported; values outside 0.5 to 60 LPA are dropped as entry errors. Averages and middle halves use only records with a salary, and no average is shown for a group with fewer than 20 offers (10 for a single employer). Cities count only when the job location names exactly one city. The aggregates are downloadable as CSV; cite as "Skill-Lync placement records, 21 Nov 2026, n = 307".

Free career counselling

Talk to a counsellor.

Tell us your branch, year and the role you want. We will tell you honestly what the job market looks like and which course, if any, fits.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.