Simulink model link: https://drive.matlab.com/sharing/2a368793-0904-4593-bb99-f71458269549 Simulink week2 challenge Aim : Make a Simulink model of Doorbell using solenoid block . Use a thermistor to sense the temperature of a heater & turn on or turn off the fan . 1. Doorbell          …

Q. In this project, interfaces for mathematical Set Theory are implemented using C programming language. User can give the input like two list of data and this program will give the output as the union and intersection of these two lists. Ans. #include <stdbool.h>#include <stdio.h>#include <stdlib.h>//…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

AIM: To study the system level simulation of an all terrain vehicle. KEYWORDS: CVT, lookup table, Dashboard, baja ATV SOFTWARE: Matlab, Simulink OBJECTIVE: 1. Study the baja ATV model without dashboard. 2. Study the baja ATV model with dashboard. 3. Study the baja ATV model using lookup table without dashboard.…

  Aircraft genarally has three landing gears.   Planes that have retractable gear generally retract their gear for improved performance. Not having wheels and struts hanging down streamlines the plane, improves fuel efficiency, enables them to fly faster and higher, and makes for a quieter, more comfortable…

Aim: Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message…

Circuit:         Code: int trigPin = 11; // Triggerint echoPin = 12; // Echolong duration, cm, inches;long sum=0;long avg;int i; void setup() { //Serial Port begin Serial.begin (9600); //Define inputs and outputs pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);} void loop() { // The sensor is triggered…

Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested…

Static Analysis: 1. Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_tbrun_examples\Ggrocers.c” (Single .c file), modify the Code to remove violations and make compliant to MISRA: C 2012 & CERT standards. Generate Code review report compliant to MISRA: C 2012 Coding Standards Generate…

Aim: To create a Simulink model of Vehicle Direction Detection as per the Requirement data.   Requirement - 1: Steering wheel input as yaw rate (Signal name: SteeringWheel_YawDegreeInput) is the input for this system. This is compared against 3 angular values, one each for left turn, right turn & straight…

Project Adaptive Cruise Control Aim: To develop the Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. To follow all the MBD related processes such as Requirement Tagging & Traceability, SLDD creation, Configuration Parameter changes, Model Advisor check & Code Generation. Adaptive…

1.Simulink/state flow modules for wiper control system Aim:     To develop a Simulink/state flow modules for wiper control system based on the given conditions. Conditions: If the density of the rain is low, then wiper rotates with low speed, the output signal should be 100rpm If the density of the…

1) Aim:- To develope a simulink model as per the requirement and sldd creation, JMAAB Testing, MIL and SIL Coverage report & Harness results for the model to be done. Description:- Cluster Instrument receives the signals from other ECU's via CAN bus interface. It also receives commands from the driver via steering…