. list down different turbo charging and locate examples from gt power Ans. Single-turbo  twin-turbo twin-scroll turbo variabule geometry turbo variable twin scroll turbo electric turbo Single stage turbo This can be used for eithere  top end power or low end power. this are fixed geometry of turbine wheels and…

Introduction A spark ignition IC engine  model take for my case study is single cylinder model. it is port injected and fuel and air enters in to combustion chambor as homogenious mixture.Engine runs at 1800RPM   ENGINE PRFORMENCE PREDICTIONS  Following predictions obserd on the engine performance when engine…

Introduction A model of a CI engine running at 1800rpm is given below. Air is allowed to enter through the inlet and moves along the runner to meet at the throttle and then allowed ro enter the cylinder  fuel is injected directly into cylinder for combustion to happen and exhast gases are allowed to leave the outlet.…

Q1.Explore the GUI of GT SUITE and list down modules available with brief description. Ans. GT SUITE consiste of  GT-ISE GEM3D GT-POST VTDESIGN GT-SPACECLAIM OPTIMIZATION   GT-ISE is the interface of GT to build models and simulation.it helps to create the model step by step and control the settings of each individual…

1.Explore tutorial number 9 and write a detailed report? Ans: This tutorial number 9 is explaing about how to convert full desinged model to fast running model by step by setp in 8steps. FRM will used to run the model which can be faster in solving time in real time. in this tutorial 9 they used 4-cylinder turbocharged…

1.Tutorial- single cyl DI add case 2 with discretization length 0.1 mm for intake runner and compare with default case  Parameters-Torque, BSFC, max cylinder pressure simulation time Explanation A 1cylinder diesel engine model is used to study the discretization length  the above discretization length values…