OFFLINE  1. #include<stdio.h>#include<stdlib.h>typedef struct node{ int data; struct node *next;}Node;static Node *head,*tail,*newnode,*head2,*f_union,*f_intersect,*head_union,*head_intersect;Node*insert_node(Node *head_ref,int n);void display_list(Node *head_ref);Node *find_intersect(Node *head_ptr,Node…

#OFFLINE BATCH   1.   #include <stdio.h> typedef enum State{GR_DWN,CHK_BFR_TKFF,RSING_GR,GR_UP,CHK_BFR_LND,LWRNG_GR}State_Type;typedef enum Switch{Open,Close //plane is in ground}Switch_Status;typedef enum Pilot_Lever{Rising,Falling,UP,DOWN}Pilot_Lever_Status;typedef enum Hydraulic_Mechanism{Working,Malfunctioning}Hydraulic_Mechanism_Status;/*.....input…

#OFFLINE BATCH //MASTER #include<Wire.h>void setup(){  pinMode(A2, INPUT);  Serial.begin(9600);  Wire.begin(3); }void loop(){  float value=analogRead(A2);  signed int voltage=(value*5)/1024;   Wire.beginTransmission(1);  Wire.write(voltage);  Wire.endTransmission(); …

#OFFLINE BATCH   float microsecToinchs( float d);float avg;int i,sum;int duration,inches;float Duration_inch;int data[5];void setup(){  Serial.begin(9600);  pinMode(7, INPUT);}void loop(){  float average = mov_avg();  Serial.println("distance value is");  Serial.println( inches);  delay(1000);}void…

#OFFLINE BATCH     if(owner long press the power button) {       open the company logo at centre; } else if(customer press the power button) {       open the apps in grid; } else if(owner power on the phone) {       shows call the phone icon on first position at bottom;…

#OFFLINE BATCH

#OFFLINE BATCH     #include <avr/io.h> //preprocessor directive#define F_CPU 16000000ul#include "avr/interrupt.h"//Preprocessor directive of an avr interrupt#include <util/delay.h>#define sw_dir (PIND&(1<<1))#define sw_spd (PIND&(1<<2))#define pw (PINC&(1<<3))#define…

#OFFLINE BATCH     #include #include #define F_CPU 8000000#include #include #include #define LCD_data_dir DDRD //LCD data port direction#define LCD_cmd_dir DDRC //LCD command port direction register#define LCD_data_port PORTD //LCD data port#define LCD_cmd_port PORTC //LCD command port#define EN PC2 //enable signal pin#define…

AIM: To Calculate  and Check the Pressure and Temperature in an Atmosphere using Temperature sensor, Pressure sensor and Arduino by using Binary Semaphore in FreeRTOS.   Requirements: 1. Arduino Uno 2. Temperature Sensor 3. Pressure Sensor  4. Connecting wires 5. USB cable   CODE: #include #include…