Aim:             To write a program to solve the given ODE in the challenge,and also to write a code for making a video of motion of simple pendulum and also to write a code to find the position of the pendulum. Solution:         The given below code is a function…

Aim:         To write a code to fit a linear and cubic polynomial for the Cp data given below,using R-square method and RSME method. Solution: Curve Fitting:            Curve fitting is the process of constructing a curve, or mathematical function, that has the best…

Aim:      To understand the concept of genetic algorithm and Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function. Solution: Genetic Algorithm:      A genetic algorithm (GA) is a method for solving both constrained and unconstrained…

Aim:     To creat a 3D model of internal geneva mechanism parts and assemble it and to make a motion study on it and to obtain the following plot, are as follow  Contact force (between driving and the driven wheel) as a function of time. Angular Displacement of the driven wheel. Compare the contact…

Aim:    To design and assemble Planetary gear arrangement and do motion study on it using solidworks.Solution:Planetary Gear (or) Epicyloic gear train:    An epicyclic gear train (also known as planetary gear) consists of two gears mounted so that the center of one gear revolves…

Aim:     To write a program for prasing the NASA's thermodynamic data and also to plot the various graph on various chemical components like oxygen, nitrogen, and carbon di-oxide,etc., also to find the molecular weight of each of the components. Solution:           By using the below governing equation the blow codes are…

Aim:     To create all the model and assemble them in solidworks and do a motion study on it. Solution: Engine:         An engine or motor is a machine designed to convert one form of energy into mechanical energy.heat engine, like the internal combustion engine,…

Aim:       To Model the parts and assemble them in SolidWorks and Run the simulation using the below parameters.                   Solution:About engine valve train: (reference:wikipedia)                 …

Aim:  Simulate the flow over a cylinder for the conditions shown in the video. 2. Calculate the baseline case Reynolds number.  3. Run a baseline simulation and then calculate the Reynolds number. Then increase the Reynolds number by a factor of 20%, 40%, and 100% then run the transient flow simulation.…

Aim:     To create the model in Solidworks according to dimensions that you see fit. Model it in Solidworks according to the image shown below,                         and Conduct a frequency analysis and apply a bearing fixture on the stepped face of the rod at the two ends and perform the analysis. Solution: Setting…

Aim          To write a MATLAB program for Drag force on cyclist and also making a Plotof the following 1.Plot Between Velocity and Drag Force 2.Plot Between Drag_Coefficient and Drag Force Solution 1.A Plot between veloctiy and Drag Force                …

Aim:                    To write  a MATLAB program for forward Kinematic motion of a robortc arm as given in the video CODE ATTACHEMENT : close all clc l1 = 1; l2 = 0.5; theta1 = linspace(0,90,10); theta2 = linspace(0,90,10); ct = 1; for i = 1:length(theta1) THETA1…

Aim         To write a code for solving Otto cycle and to plot the P_V diagram and also to solve the thermal efficiency of the cycle using MATLAB. Procedure and Solution code for creating plot of P_V diagram and to solve thermal efficiency as follow; close all clc %constants bore = 0.25; stroke…