CONJUGATE HEAT TRANSFER ANALYSIS ON GRAPHICS CARD A graphics card is primarily designed to remove the graphical processing tasks from the processor or RAM. It includes a dedicated graphical processing unit (GPU) and a dedicated RAM that…

                                            GEARBOX SLOSHING EFFECT In this project,flow pattern of fluid in gearbox is analyzed.CFD simulation is carried out using Ansys Fluent.In gearbox gears are rotating parts…

                                   CHT ANALYSIS ON  EXHAUST PORT 1.conjugate heat transfer The CHT  allows the simulation of the heat transfer between Solid and Fluid domains by exchanging thermal energy at the interfaces…

                                 PARAMETRIC STUDY OF GATE VALVE In this project, a parametric study on the gate valve is performed using the ANSYS WORKBENCH, in which 5 different design point from an initial condition of lift is set and…

  Q-1: Rayleigh Taylor instability is instability of an interface between two fluid which has different densities which occurs when low dense fluid push the high dense fluid against external forces. Practical CFD Models based on mathematical analysis of Rayleigh taylor., 1.Early time growth: It was noted that two…

                                                     FLOW OVER CYLINDER    INTRODUCTION                         …

                                               Cyclone seperator simulation 1.four empirical model used for cyclone seperator efficiency: 1)LAPPLE MODEL 2)KOCH AND LICHT MODEL 3)LI AND WANG MODEL 4)IOZIA…

                                       Air Flow around the AHMED BODY 1. Ahmed body and its description The Ahmed Body was first created by S.R. Ahmed in his research “Some Salient Features of the Time-Averaged Ground…

                                          CFD ANALYSIS OF MIXING TEE INTRODUCTION:    In this project CFD simulation is done using ANSYS Workbench for the short mixing tee and long mixing tee.In which hot…

                                                                                           …