An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. Roof Pannel is attached to the car with the help of Front and Rear roof rail, few bow roof is also used to support the…

BRACKET I LINK: https://drive.google.com/open?id=123ji1IlyF5kV8DFU5TYvlZClHlqlmntR   OBJECTIVES: In this tutorial we will learn the step by step procedure to create “Bracket” from the given 2D Drawing   INTRODUCTION: Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet…

Challenge 3 Model 1: Model 2: Model 3: Model 4: Model 5: Model 6:

Rear Wheel:  Feature Used: Extrude, Extrude cut, Revolve, Chamfer, Linear pattern, Circular pattern, Mirror, Fillet Sprocket: A sprocket is a profiled wheel with teeth, or cogs, that mesh with a chain, track or other perforated or indented material. Sprockets are used in bicycles, bike, cars, and other machinery…

WHEEL ARC: Wheel arc is an arch-shaped cavity in the body of a vehicle, which houses a wheel. It ia a part of fender. Wheel arc major roles are To avoid chipping of stone, mud, solid particle, etc to the engine compartment. It also helps preventing particles being thrown towards pedestrains. This is the link for part file.…

BOX ASSEMBLY  LINK: https://drive.google.com/open?id=1_nuJJgDKJ09c6n_G-kc_LKXTJgdKijd5   OBJECTIVE In this tutorial we will learns the step by step procedure to design a ‘Sheet metal Box Assembly’ using Siemens NX Sheet metal application.   INTRODUCTION: Sheet metal is metal formed by an industrial…

Casing Design   Link: https://drive.google.com/open?id=1PqmT-EpHVdXakoqkmLvWPdTu7sdn-apw   Objective: In this tutorial we will learn the step by step procedure to design a ‘Sheet metal Casing’ using Siemens NX Sheet metal application   Introduction: Sheet metal is metal formed by an industrial…

ODD SHAPED ENCLOSURE LINK: https://drive.google.com/open?id=1ba3hJL6LnAnIDu79DDAwW3ka17ac8HvY   OBJECTIVES: In this tutorial we will learn the recommended workflow procedure to design a ‘Sheet Metal part for Odd Shapes’ using Siemens NX Sheet Metal Application.   INTRODUCTION: Sheet metal is metal…

SECTION MODULUS: Section modulus is a geometric property for a given cross section used in the design of beams or flexural members. Section mudulus is of twotypes they are : Elastic section modulus(S). Plastic section modulus(Z). For general design \"S\" is used. SECTION-1: I = 4878536.956 mm^4 Y = 439.7 mm S = I/Y = 11095.149…

Amit_OIL TANK: Oiltank is an important part of an automobile. In oil tank oil is stored and supplied to the engine for its running. In bike, the oil tank is located above the engine. Features used: Extrude Boss, Shell, Combine and Fillet Sketch tool used: Lines, Spline, Dynamic Mirror. Steps: For creating oil tank lets…

https://drive.google.com/open?id=1AfWaKLdPtKJTeLO2osPicmKWj-ugqgHO   This is a link for presentation.

Amit_Chassis:  A chassis is the load-bearing framework of an artificial object, which structurally supports the object in its construction and function. An example of a chassis is a vehicle frame, the underpart of a motor vehicle, on which the body is mounted such as wheels and transmission, driver\'s seat, etc…

Amit_Front Fender & Amit_Rear Fender: Fender is the American English term for the part of an automobile body that covers the wheel well. Fronts fender defines fender used for the front wheel & Rear fender defines fender used for the rear wheel. In India, fenders are basically called mud-guard. Its primary goal…

What is underbody coating?    The underbody is the body structure of the underside of the vehicle. The underbody coating is a protective coating to the underside of a vehicle chassis from external environment and is a thick, rubberized paint that forms thick coating all along the underside of the car when sprayed…

METAL BRACKET II LINK: https://drive.google.com/open?id=1S6ZVcauunlE6CvMJrQA9BBUjOFmwTVCx   OBJECTIVES: In this tutorial we will learn the step by step procedure to create “Metal Bracket II” from the given 2D Drawing   INTRODUCTION: Sheet metal is metal formed by an industrial process into thin, flat…

Gas Tank:  Feature Used: Reference Plane, Surface sweep, Surface Trim, Projected curve, Loft, Composite Curve, Shell, knit, Cut Swipe, Fillet https://drive.google.com/open?id=1MNGzkVH9M9CrC0onlbJaz1c6fVF2sapU   Assembly Of Bike:  https://drive.google.com/open?id=1vltsGwSooQziEqC-oixM_vGW350irqvH

AIM: To practice and gain knowledge about tools used in solidworks to create model. To create American Chopper realistic Rendring using solidworks software. INTRODUCTION: In this project American Chopper is designed, modeled and assembled using Solidworks 2019 software. American Chopper has different customized parts like…

AIM: To design and develop car hood. To understand how Latch reinforcement and Hinge are placed on hood. INTRODUCTION: The hood or bonnet is the hinged cover over the engine of motor vehicles that allows access to the engine compartment, or trunk on rear-engine and some mid-engine vehicles for maintenance and…

## Comments by the grader Near the BAFEL mounting region, there are no slots or emboss available. Do add those features there and update it in the challenge page   ##   https://drive.google.com/open?id=1APAG6wFVSMvDe5HPqtnO2inkHjk8OzPe This is the link for Fender Design Challenge. https://drive.google.com/open?id=1bxiG2394XiokUbkrD-4et58uG7lZRJJR…

Backdoor of a car is aso called tailgate. A car backdoor consist of inner pannel, 2-3 outer pannel & reinforcements. Car backdoor is mainly made of steel or aluminium based on the budget of a car. The inner pannel consist of hinge reinforcement, gasstay reinforcement, latch and striker reinforcement & wiper motor…

AIM: To design, model and assembled the exterior parts of a Yatch. To create photorealistic render of Yatch To practice andgain knowledge about tools used in Solidworks to create model. INTRODUCTION: A yacht is a watercraft used for pleasure or sports. In this project Yatch is designed, medelled and assembled using…

1200 rendered pass is used. In this render Snap to Floor option is enabled and 1200 rendered pass is used. In this rendered model Snap to Floor option was not enabled and 650 rendered pass is used.   Rendered Model Link: Solidworks Visualize: https://drive.google.com/open?id=1ZrqcraDxeOpvKn79HXjJkWVu_U1nSfGm Solidworks…

AIM: Solve 2nd order ODE using MATLAB. OBJECTIVES: To solve 2nd order Simple Pendulum ODE and plot amplitude vs. time graph. To simulate the motion of Simple Pendulum. GOVERNING EQUATIONS: The ODE of the motion of simple pendulum with damping `(d^2 θ)/(dt^2 )+ b/m dθ/dt+ g/L sin⁡θ=0` ----eq. 1 m = mass…

I have already graduated from the course and just submitting this only to increase the completion percentage.   https://drive.google.com/drive/folders/1guVk8u4nXCUikDaHJ3x-PA_VWXc8kLVs?usp=sharing  

PART LINK - https://drive.google.com/file/d/1EIv27ITrbVtVmiYdOE3MxGSUj-H6PKVC/view?usp=sharing