CFD fundamentals full course: free, 2.2 hours
This is a single 2.2-hour lecture delivered as slides, with a few short videos, and no software demonstration. After a 10-minute introduction it moves through physical testing, virtual testing, the physics behind CFD, the three-step CFD process, industry challenges and career paths.
9 chapters · published 3 Jan 2025 · 16,810 views as of 18 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and other engineering students, and early-career engineers, who want to understand why CFD is used and how the CFD process works before opening any solver.
What will you learn?
- Explain what a physical test such as a wind tunnel test costs in facilities, people, safety and repeat runs
- List the advantages and the limits of virtual testing, and why industry uses virtual and physical tests together
- Name the equations behind CFD (Bernoulli, mass and energy conservation, Navier-Stokes) and why the solutions are approximate
- Describe the boundary layer, no-slip at the wall, and how flow separation raises pressure drag on a car
- Break a CFD problem into pre-processing, solver selection and analysis of results, and say what to decide before touching any tool
- Describe the main challenges in CFD and the job profiles the speaker lists
What does each part of the course cover?
7 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 10:337 min · 1 chapter
Physical testing
Walks through a NASA video of an aircraft wing being tested in a wind tunnel, then lists what a physical test needs: a very large facility, heavy machinery, skilled people, probes and sensors that can disturb the flow, data capture systems, safety and failure limits, and the cost of all of it.
Chapters
- 10:33Physical testing: a wing in a wind tunnel
- 17:047 min · 1 chapter
Virtual testing
Defines a virtual test as a computer replica of a physical test, built from governing equations and checked against known principles such as Bernoulli's equation. Covers convergence criteria, the limits of virtual tests, and the advantages: cost, flexibility, time, quality control, hazardous temperatures and failure conditions.
Chapters
- 17:04Virtual testing: what it is, its limits and advantages
- 24:2110 min · 2 chapters
Why industry uses both kinds of testing
Explains what virtual tests cannot give, using the feel of acceleration and tyre wear rate as examples, then shows how industry combines both: simulate and iterate on the design until confident, then run the physical test, and accept a stated tolerance between the two. Combustion flame propagation and pressure inside a beam are given as cases where physical testing is impractical.
- 34:3813 min · 1 chapter
What CFD is and why it is needed
Introduces the equations behind CFD: Bernoulli, mass and energy conservation and Navier-Stokes, converted to partial differential equations and solved as approximate solutions. Uses vehicle fuel consumption road tests, with load, wind and driver variation, and a video on wind effects around buildings to show why simulation is needed.
Chapters
- 34:38Computational fluid dynamics: governing equations and the case for simulation
- 47:431 h 17 min · 1 chapter
The CFD process and the flow physics behind it
This hour-long block covers the three steps (pre-processing, solver selection, analysis of results) with a pizza-ordering analogy, then boundary layer theory, no-slip, flow attachment and separation on an aerofoil and a car, laminar and turbulent flow, y+, mesh refinement near walls, and a pre-processing checklist. It ends with underbody flow results for sedans, SUV and truck, and a cyclist study.
Chapters
- 47:43The CFD process: pre-processing, solver and results, with the flow physics behind them
- 2:04:183 min · 1 chapter
Challenges in CFD
Covers the long run times of full-vehicle simulations (the speaker cites 18 to 20 hours), the wish to update a simulation instead of rerunning it, why real physics is hard to predict, and the difference between direct numerical simulation and approximate RANS solutions. Real-time simulation is described as an open goal.
Chapters
- 2:04:18Challenges in CFD
- 2:07:317 min · 2 chapters
Career prospects and future challenges
Lists CFD job profiles: meshing and case set-up, application engineer, software or post-processing development, and two kinds of research. Then looks ahead at product competition, computing cost, ventilation and medical studies such as COVID spread and the heart, and electric vehicles and aircraft. The speaker also says CFD jobs are not easy to get.
Is the Fundamentals of Computational Fluid Dynamics course really free?
Yes. All 2 h 15 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 3 Jan 2025 and had 16,810 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Fundamentals of Computational Fluid Dynamics course take to finish?
The video runs 2 h 15 min across 9 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "The CFD process and the flow physics behind it" (1 h 17 min), so give it its own days.
Does the free CFD course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Introduction to GUI-based CFD using Ansys Fluent (free lessons), then Post Graduate Program in Computational Fluid Dynamics (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Does this CFD course use any software like Ansys Fluent?
No software is demonstrated. The lecture is slides plus a few short videos, and the speaker says the first part of the CFD process is independent of any tool. He mentions Ansys Fluent only to say the talk is not about it. You do not need to install anything to follow along.
Is this CFD course for beginners?
It is an introduction. The speaker says CFD cannot be taught in a 2 to 3 hour session, so the aim is to cover why CFD is used, the basic laws and the process. He says he will not go into detail on equations, Reynolds number or y+, and expects mostly mechanical engineering students.
What is the CFD process explained in this course?
The speaker describes a three-step process: pre-processing, solver selection and analysis of results. He stresses that pre-processing is more than meshing: understand the geometry, the physics, the important parameters and whether the flow is laminar or turbulent first, and use a pizza-ordering analogy to show why.
Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course