Introduction to Structural Engineering, free, 1 hour 11 minutes
This is a single 1 hour 11 minute recorded session delivered as slides, with no software demonstration. It starts with where structural engineering sits in civil engineering, then covers trends, software and a long technical section, and ends with entry-level to senior roles.
7 chapters · published 10 Jan 2025 · 5,439 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Civil engineering students and early-career engineers who want a first look at what structural engineers do, the software they use and the basic analysis ideas behind beams and frames.
What will you learn?
- Name the civil engineering disciplines and say where structural engineering fits among them
- Explain why strength, serviceability, durability and economy all matter in a structural design
- Recognise the common software for analysis (ETABS, SAP2000, STAAD.Pro), drafting (Revit, AutoCAD) and what Dynamo and Grasshopper link
- Describe pin, roller, fixed and spring supports and the reactions each one produces
- Read bending moment and shear force diagrams for simply supported, cantilever, fixed and two-span beams and for portal frames
- List gravity, lateral and combined loads and explain how load combinations are superimposed in design
What does each part of the course cover?
5 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 7:004 min · 2 chapters
Civil engineering disciplines and what structural engineers do
Briefly runs through the civil engineering fields (including geotechnical, water resources, transportation and environmental), then defines structural engineering: resisting gravity and environmental loads, with serviceability, durability, economy and coordination with other trades such as mechanical and plumbing.
- 11:135 min · 2 chapters
Current trends and structural engineering marvels
Covers digital workflows that move data from a Revit model into an analysis model, machine learning for estimating material quantities, and complex geometry. Then shows landmark structures in Dubai and in India, and notes that tall buildings are sensitive to wind and short stiff ones to seismic loads.
- 16:178 min · 1 chapter
Industry software for analysis, design and drafting
Names the tools used in practice: ETABS, SAP2000 and Perform 3D from CSI, STAAD.Pro and RAM from Bentley, ANSYS and Abaqus for research or shell structures, and Revit, AutoCAD and Rhino for drawings. Explains how Dynamo and Grasshopper link drawing and analysis software.
Chapters
- 16:17Industry software for analysis, design and drafting
- 24:0443 min · 1 chapter
Technical aspects: materials, supports, beams, loads and frames
The longest block, about 43 minutes. Covers stress, strain and Hooke's law, the stress-strain curve of mild steel against concrete, pin, roller, fixed and spring supports, internal hinges, beam types, the beam differential equations, sign conventions, load types, bending moment and shear force diagrams for beams, and portal frames with load combinations.
Chapters
- 24:04Technical aspects: materials, supports, beams, loads, bending moment and shear force diagrams, frames
- 1:06:504 min · 1 chapter
Roles and responsibilities in structural engineering
Describes entry-level work (analysis and design of elements, shop drawing review, answering RFIs, quantity estimation, site visits), senior-level work (client and trade coordination, leading a team, checking quantities) and top-management duties. Ends with common project sectors such as airports, stadia, healthcare and residential.
Chapters
- 1:06:50Roles and responsibilities, from graduate engineer to top management
Is the Introduction to Structural Engineering course really free?
Yes. All 1 h 11 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 10 Jan 2025 and had 5,439 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Introduction to Structural Engineering course take to finish?
The video runs 1 h 11 min across 7 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Technical aspects: materials, supports, beams, loads and frames" (43 min), so give it its own days.
Does the free structural engineering course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Civil Engineering Fundamentals (free lessons), then Civil Engineering Fundamentals Module (₹40,000), then Post Graduate Program in High-Rise Building Design & Analysis (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Does the structural engineering intro need any software?
No. The session is slides only, with no software demonstration. It names ETABS, SAP2000, STAAD.Pro, Revit, AutoCAD and others so you know what the industry uses, but you do not need any of them installed to follow along.
How do you read a bending moment and shear force diagram?
The speaker gives rules to check a diagram: the slope of the bending moment diagram equals the shear force, a drop in the shear force diagram equals an applied point load, and a constant moment means zero shear. Examples include simply supported, cantilever, fixed, two-span beams and portal frames.
What loads does a structure have to resist?
The video groups loads as gravity (self-weight, floor finishes, facade, live load, partitions, snow and rain), lateral (earth and fluid pressure) and hybrid loads that act in both directions (blast, wind and seismic). Design codes combine these with load factors, for example a dead load plus 1.5 times wind.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course