CFD simulation using SOLIDWORKS: free, 2 hours
A single 2-hour video that teaches CFD through five hands-on problems in SOLIDWORKS Flow Simulation, from a simple pipe to a rotating centrifugal pump. The instructor builds each geometry in SOLIDWORKS, sets up the study, and the later problems end with a project task for you to complete.
12 chapters · published 30 Aug 2024 · 2,83,094 views as of 18 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Undergraduate mechanical or aerospace engineering students who want an introduction to CFD through SOLIDWORKS Flow Simulation, without heavy mathematics.
What will you learn?
- Prepare a SOLIDWORKS part for CFD by closing it with lids and setting up an internal or external study with the Flow Simulation wizard
- Apply inlet velocity, static pressure and wall boundary conditions and view results on cut planes and line probes
- Run parametric studies and a grid dependency test, and set plot legends so they stay valid across cases
- Set up a transient study with a total time and output time step, and animate the result
- Create a NACA airfoil, set an angle of attack and read drag and lift force goals
- Vary valve lift with a driving dimension to plot mass flow rate, and model a centrifugal pump with a rotating region
What does each part of the course cover?
6 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 3:1121 min · 2 chapters
Course introduction and pipe flow set-up
Explains who the course is for, then builds a pipe in SOLIDWORKS (circle, extrude to 0.3 m, shell to 1 mm) and closes it with lids. Sets up an internal, steady-state air study with the wizard, a 1 m/s inlet, a static-pressure outlet and a real wall, then runs and views a cut plane.
- 24:2019 min · 2 chapters
Plot legends, parametric study and grid dependency
Shows why velocity plot limits should stay on global maximum and minimum when running a parametric study on inlet velocity (1 to 20 m/s). Then builds a 1 m pipe with two line probes and runs a grid dependency test, doubling and quadrupling the cell count in X, Y and Z.
- 42:539 min · 1 chapters
Transient flow over a cylinder
Models a cylinder (radius 0.02 m, length 0.05 m) and sets up an external, time-dependent air study with flow along the x axis. Uses a total time of about 0.1 seconds with 0.01-second output steps, then builds an animation of the transient result and sets a Reynolds number exercise.
Chapters
- 42:53Transient flow simulation of flow over a cylinder
- 51:5813 min · 1 chapters
NACA airfoil and angle of attack
Imports NACA airfoil coordinates with a curve through XYZ points, closes the sketch, rotates it to a 10 degree angle of attack and extrudes it. Runs a 2D external study with an x-direction flow velocity, force goals, a local mesh, then reads drag and lift from the goals.
Chapters
- 51:58NACA airfoil simulation: angle of attack, drag and lift
- 1:04:5424 min · 4 chapters
Valve flowbench: geometry, valve lift study and mini project
Models an intake port with a sweep, shell and a revolved valve, then sets valve lift with a driving dimension. Runs a parametric study over lift values with mass flow rate as the goal, then reviews a flowbench example with flow trajectories and sets the mini project.
- 1:29:2131 min · 2 chapters
Centrifugal pump with a moving reference frame
Builds a simplified pump: a five-blade impeller, volute, inlet and outlet runners, and a rotation zone with merge results unchecked. Sets a rotating region in a water study, fixes the run at 500 iterations, views flow trajectories, then runs an outlet velocity parametric study for a pressure versus flow plot.
Is the CFD Simulation using SOLIDWORKS course really free?
Yes. All 2 h 0 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 30 Aug 2024 and had 2,83,094 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the CFD Simulation using SOLIDWORKS course take to finish?
The video runs 2 h 0 min across 12 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Centrifugal pump with a moving reference frame" (31 min), so give it its own days.
Does the free SOLIDWORKS Flow Simulation course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is CFD Simulation using SolidWorks (free lessons), then CFD Simulation using SolidWorks (₹40,000), then Post Graduate Program in SOLIDWORKS Design and Analysis (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need SOLIDWORKS Flow Simulation to follow this CFD course?
Yes, to follow along the instructor says you need a good internet connection and a copy of SOLIDWORKS with Flow Simulation. All the geometry is built in SOLIDWORKS and every study is run in the Flow Simulation add-in. The video does not cover installation or licensing.
Is this SOLIDWORKS CFD course good for beginners?
It is aimed at undergraduate mechanical or aerospace engineering students who may find CFD maths-heavy. The instructor says most difficult details are hidden while core concepts are still covered. Later chapters set projects, such as an airfoil angle of attack sweep and a valve lift plot, for you to do yourself.
What simulations are covered in the SOLIDWORKS CFD course?
Five problems: steady pipe flow with parametric and grid dependency studies, transient flow over a cylinder, a 2D NACA airfoil at a 10 degree angle of attack, an engine valve flowbench with valve lift parametric study, and a centrifugal pump using a moving reference frame.
Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course