FEA using SOLIDWORKS Simulation: free, 4 hours
One video of about 3 hours 51 minutes in ten chapters: two theory chapters on FEA and analysis types, then hands-on SOLIDWORKS Simulation studies from a first static analysis to buckling, fatigue, drop test and frequency analysis.
10 chapters · published 15 Aug 2024 · 1,33,744 views as of 18 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and civil engineering students and working designers who already model in SOLIDWORKS and want to learn finite element analysis with SOLIDWORKS Simulation.
What will you learn?
- Explain the analytical, experimental and numerical methods, and the pre-processing, processing and post-processing steps of FEA
- Set up a static study in SOLIDWORKS Simulation: material, fixtures, external loads, mesh and run (door handle, plate with a hole, cantilever beam)
- Tell when linear analysis is not enough and switch to nonlinear static or dynamic studies, including 2D simplification and contact sets
- Compare 1D beam, 2D shell and 3D solid results on the same cantilever beam, and run a design study with variables, constraints and goals
- Run buckling, fatigue (S hook), drop test (PCB board) and frequency (support brackets) studies and read their results
- Raise a buckling factor of safety by adding a stiffener and optimising its position with a design study
What does each part of the course cover?
7 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 4:0136 min · 2 chapters
FEA theory and the types of analysis
Why FEA exists, shown on a cantilever beam solved analytically, experimentally and with elements and nodes. Then the stress-strain plot, pre-processing, processing and post-processing, h and p mesh refinement, and static versus dynamic and linear versus nonlinear analysis, including contact nonlinearity.
- 40:1256 min · 2 chapters
SOLIDWORKS Simulation environment and basic studies
Switching on the Simulation add-in and setting up a first static study on a door handle: brass, fixed screw holes, a 500 N force and a 5 mm mesh. Then a plate with a hole taken from linear to nonlinear static, and a nonlinear dynamic punch and sheet metal study with 2D simplification and contact sets.
- 1:35:5634 min · 2 chapters
1D, 2D and 3D analysis and design study
The same uniformly loaded cantilever beam solved with 3D solid, 1D beam and 2D shell elements, with the displacements compared. Then a design study (parametric study) on a cylinder with variables, a factor-of-safety constraint and a mass goal, and on a glass bottle resized to a target volume.
- 2:09:4816 min · 1 chapters
Buckling analysis
How buckling differs from bending, and how pinned, fixed and free ends change the buckled shape. A buckling study on the four-legged stand of a cyclonic separator: unneeded parts excluded, a 200 kN load, mesh control on the legs, then the buckling factor of safety and a generated report.
Chapters
- 2:09:48Buckling analysis of a stand, with a bracket stiffener example
- 2:25:3426 min · 1 chapters
Fatigue analysis
Fatigue failure, the S-N curve and the endurance limit, then a fatigue study on an S hook: a static study first with pure gold and a 200 N load, then constant amplitude fatigue with fully reversed loading, S-N data derived from the material, and damage and life results. Variable amplitude, harmonic and random vibration studies are explained.
Chapters
- 2:25:34Fatigue analysis of an S hook
- 2:52:0015 min · 1 chapters
Drop test
What a drop test is and how to open the specialised drop test study. A PCB board assembly is meshed with a curvature-based mesh and set up with drop height, gravity, a rigid target and result options. The video then reviews stress, displacement and strain results from a run done beforehand.
Chapters
- 2:52:00Drop test of a PCB board
- 3:07:0744 min · 1 chapters
Frequency analysis
Natural frequency, resonance and mode shapes, plus the solver options. Frequency studies on three support brackets (normal, thicker, and with a stiffener), alone and as assemblies, with resonant frequencies and mass compared. The video ends with a bracket buckling example where a stiffener raises the factor of safety, using a design study.
Chapters
- 3:07:07Frequency analysis of support brackets
Is the FEA using SOLIDWORKS course really free?
Yes. All 3 h 51 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 15 Aug 2024 and had 1,33,744 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the FEA using SOLIDWORKS course take to finish?
The video runs 3 h 51 min across 10 chapters. At one hour a day that is about 4 days; plan roughly twice that if you practise each exercise as you go. The longest section is "SOLIDWORKS Simulation environment and basic studies" (56 min), so give it its own days.
Does the free SOLIDWORKS Simulation course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is CAE Simulation using SolidWorks (free lessons), then FEA using SOLIDWORKS (₹40,000), then Post Graduate Program in SOLIDWORKS Design and Analysis (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need SOLIDWORKS Simulation to follow the SOLIDWORKS FEA course?
Yes, to practise. The video notes the Simulation module is not visible until you activate it from the SOLIDWORKS add-ins, and that the option will not appear if you have not purchased the Simulation package. It also assumes you already know SOLIDWORKS 3D modelling (sketches and features). The video shows SOLIDWORKS 2019.
What types of FEA analysis does the course cover?
Static linear and nonlinear, nonlinear dynamic with 2D simplification, 1D/2D/3D, design (parametric) study, buckling, fatigue, drop test and frequency analysis. Examples include a cantilever beam, a door handle, a glass bottle, a cyclonic separator stand, an S hook, a PCB board and support brackets.
When should I use a nonlinear instead of a linear static study?
The video shows it in two ways: when stresses go past the material's yield strength (the plot marks it with a red arrow), and when displacements are large, where SOLIDWORKS prompts you to switch. It also explains geometric, material and contact nonlinearity, using a cantilever beam that touches a support bracket as the contact example.
Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course