Full course · free on YouTube · 5 h 32 min

Physical Modeling in Simscape and Simulink, free, 5.5 hours

One 5 hour 32 minute video that starts with installing the MATLAB and Simulink trial, then works through block diagrams, solver settings, Simscape models, scripts and workspaces, and Stateflow control logic. It is taught as four chapters, each split into parts.

13 chapters · published 25 Oct 2024 · 38,285 views as of 18 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and electrical engineering students who know basic MATLAB and want to build Simulink and Simscape models of physical systems.

What will you learn?

  • Turn an equation into a Simulink block diagram using Constant, Add, Product, Ramp, Display and Scope blocks
  • Model a lever, a gear and wheel-axle chain and a DC motor driving a fan load with Simscape blocks
  • Choose a fixed-step or variable-step solver and set stop time and time step for what you want to study
  • Convert between Simulink and physical signals and add the Solver Configuration block that Simscape networks need
  • Group blocks into subsystems and drive their parameters from an M-file script, the base workspace or the model workspace
  • Build Stateflow charts with states and transitions, such as a High/Low sign check and a timed traffic light

What does each part of the course cover?

10 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.

  1. 2:183 min · 1 chapters

    Installing the MATLAB and Simulink trial

    Shows how to find MATLAB on the MathWorks site, request a trial with an email ID, pick the Simscape-related trial package and your operating system, then activate the account. It ends by opening Simulink and browsing the Simscape toolbox in the Library Browser.

    Chapters
    • 2:18Downloading and installing the MATLAB and Simulink 2020 trial
  2. 5:1252 min · 2 chapters

    Why model, and what a model, simulation and block diagram are

    Explains mathematical modelling with a gearbox ratio, a car racing game and a pilot simulator, then turns A plus B into a Simulink block diagram with two constants and an Add block. Covers resistor, capacitor, inductor, spring, mass and damper, an RLC circuit, a motor-driven pump and model fidelity.

    Chapters
    • 5:12Course scope, models, simulation and the block diagram approach (chapter 1, part 1)
    • 33:48Electrical and mechanical building blocks, the pump example and model fidelity (chapter 1, part 2)
  3. 57:381 h 7 min · 2 chapters

    First Simulink models, the Library Browser and a built-in jet pump demo

    Opens MATLAB and Simulink, saves first.slx, and builds a Product model with Constant, Display, Ramp and Scope blocks that gives 12.3 times t. Then tours the Simscape libraries, the colour coding of electrical, mechanical and thermal blocks, the help pages, and runs the built-in jet pump example with cursors and zoom.

    Chapters
    • 57:38The Simulink window and a first model with Product, Ramp and Scope (chapter 1, part 3)
    • 1:29:11Library Browser, Simscape colour coding and running a built-in jet pump demo (chapter 1, part 4)
  4. 2:04:5938 min · 1 chapters

    Simulation settings, solvers and Simscape basics

    Compares an engine start of about 5 seconds with a 5 minute efficiency run to show why stop time matters. Defines simulation time, run time, time step and parameter sweep, walks the fixed-step and variable-step solver flowchart, auto solver and ODE solver names, then splits signals, states and parameters.

    Chapters
    • 2:04:59Simulation time, time step, solvers and signals, states and parameters (chapter 2, part 1)
  5. 2:42:4325 min · 1 chapters

    A Simscape lever mechanism, step by step

    Builds lever1.slx with the Lever block, an Ideal Force Source and Ideal Force Sensor, translational references, Simulink-PS and PS-Simulink converters, and a Solver Configuration block. A force of 10 gives minus 10 at point B, and with arm lengths of 0.4 and 0.1 a force of 100 gives minus 400.

    Chapters
    • 2:42:43Building a Simscape lever model with a solver configuration (chapter 2, part 2)
  6. 3:07:4745 min · 2 chapters

    Gear and wheel-axle model, input signals and subsystems

    Models an engine-to-wheel chain with a Simple Gear, Wheel and Axle, Ideal Angular Velocity Source and a translational motion sensor, giving minus 25 for an input of 100. Tries Repeating Sequence, Signal Builder and Slider Gain inputs, then groups blocks into subsystems, variant subsystems and look-under-mask examples.

    Chapters
    • 3:07:47Gear and wheel-axle model with variable inputs (chapter 3, part 1)
    • 3:34:26Subsystems, variant subsystems and looking under the mask (chapter 3, part 2)
  7. 3:53:1318 min · 1 chapters

    Driving model parameters from scripts and workspaces

    Replaces typed block values with variables such as gr and radius, first in the command window, then in a gear parameter script saved as an M file. Shows that the script must be run before the model, and compares the base workspace with the model workspace in Model Explorer.

    Chapters
    • 3:53:13Linking M-file scripts and workspace variables to model parameters (chapter 3, part 3)
  8. 4:11:4131 min · 1 chapters

    DC motor driving a fan load

    Builds a DC motor and fan model in Simscape with a fan-load subsystem where torque follows the square of speed, an inertia block, a DC voltage source and a current sensor. Routes speed and torque with Goto and From blocks, then compares fixed 100 V and a ramp voltage, with and without inertia.

    Chapters
    • 4:11:41DC motor and fan load with Goto and From signal routing (chapter 3, part 4)
  9. 4:42:1614 min · 1 chapters

    Engine cooling model, Simscape Results Explorer and Excel data

    Opens a ready-made engine cooling system model with a lookup table, runs it for 15,000 seconds and plots cylinder wall temperature. Introduces the Simscape Results Explorer, then reads data in with the From Spreadsheet block and logs scope data to the workspace as a dataset.

    Chapters
    • 4:42:16Engine cooling model, Simscape Results Explorer and Excel input and logging (chapter 4, part 1)
  10. 4:56:0036 min · 1 chapters

    Stateflow: state machines for control logic

    Introduces control logic through a washing machine and manual gear shifting, then builds a High and Low Stateflow chart that outputs 1 or minus 1 from a Repeating Sequence input, steps through it to debug, and reads a traffic light chart with timed transitions, Dashboard lamps and a junction.

    Chapters
    • 4:56:00Stateflow charts: High/Low example and traffic light logic (chapter 4, part 2)

Is the Physical Modeling in Simscape, Simulink and MATLAB course really free?

Yes. All 5 h 32 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 25 Oct 2024 and had 38,285 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Physical Modeling in Simscape, Simulink and MATLAB course take to finish?

The video runs 5 h 32 min across 13 chapters. At one hour a day that is about 6 days; plan roughly twice that if you practise each exercise as you go. The longest section is "First Simulink models, the Library Browser and a built-in jet pump demo" (1 h 7 min), so give it its own days.

Does the free Simscape course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Introduction to Physical Modeling using Simscape (free lessons), then System Modelling and Simulation using Simulink and Simscape (₹40,000), then Pre-Graduate Program in Hybrid Electric Vehicles (₹1,50,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

How do I get MATLAB and Simulink for this course?

The first chapter shows the trial route on the MathWorks site, labelled 2020 in the chapter title. You click download a trial, enter your email ID, agree and submit, choose a trial package (the narrator picks the Simscape one), select your operating system, save the installer and activate the account with the same email and password. Prices are not discussed.

What systems do you model in this Simscape course?

A constant times ramp model giving 12.3 times t, a built-in jet pump example, a lever, an engine-to-wheel gear and wheel-axle chain, a DC motor driving a fan load, and a ready-made engine cooling model. It also covers a High/Low Stateflow chart and a traffic light chart.

Do I need to know MATLAB before starting Simulink?

The intro says that if you have learned basic MATLAB programming and running M-files, you can link scripts to Simulink models, which the course later does. It starts Simulink from the first step, though, and the narrator says you should know the mathematics of the problem you are solving.

Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Physical Modeling in Simscape, Simulink and MATLAB and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Physical Modeling in Simscape, Simulink and MATLAB course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.