Full course · free on YouTube · 1 h 36 min

Power electronics in EVs webinar: free, 1.6 hours

This is an April 2023 recording of a live Skill-Lync webinar, 1 hour 36 minutes long. The first half covers power electronics basics and the converters inside an EV, then a buck converter is designed and simulated in MATLAB Simulink from about 0:35, followed by inverters, charging, vehicle-to-grid and hardware design.

25 chapters · published 15 Apr 2023 · 10,689 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Electrical and electronics students and early-career engineers who want to see where power converters sit in an electric vehicle and how a simple buck converter is designed and simulated in Simulink.

What will you learn?

  • Explain power electronics as control and conversion of electric power, and why it matters for efficiency
  • Tell DC-DC, DC-AC and AC-DC converters apart and say where each sits in an EV (DC-DC converter, traction inverter, onboard charger)
  • Describe the difference between powertrain and drivetrain and why a motor needs a power converter between it and the battery
  • Work out a buck converter duty cycle from D = Vout/Vin and the output current and load resistance for a 19 V output
  • Build a buck converter in Simulink with a MOSFET, diode, series RLC branches and a PWM generator, and read the scope results
  • Outline the hardware design flow from specification to bill of materials, and the move to 800 V batteries with SiC and GaN

What does each part of the course cover?

8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0013 min · 4 chapters

    Power electronics basics, efficiency and switching devices

    Defines power electronics as control and conversion of electric power, with device efficiencies the speaker puts at 92 to 98 percent. A chat poll lists everyday power electronic devices, then the power switches (BJT, GTO, thyristor, diode, IGBT, MOSFET) are compared by power and frequency.

    Chapters
    • 0:00Introduction and what power electronics does (control and conversion)
    • 5:30Workshop agenda: EV basics, converters, hardware and a Simulink demo
    • 7:45Everyday power electronic devices (class poll)
    • 11:40Power semiconductor switches: BJT, GTO, thyristor, diode, IGBT, MOSFET
  2. 13:007 min · 4 chapters

    The EV as a system of systems and the converter families

    Treats the vehicle as independent systems working together, lists the electrical systems (battery and charger, e-drive, auxiliaries) and classifies converters into DC-DC, DC-AC and AC-DC, with traction batteries of roughly 300 to 900 V. Then maps the onboard charger, DC-DC converter and inverter onto an EV layout.

    Chapters
    • 13:00The vehicle as a system of systems
    • 15:27Electrical systems in an EV: battery and charger, e-drive, auxiliaries
    • 17:03Converter classification: DC-DC, DC-AC, AC-DC and AC-AC
    • 18:51Where the converters sit in an EV: OBC, DC-DC converter, inverter
  3. 20:1110 min · 3 chapters

    Powertrain, drivetrain, wide band gap devices and motors

    Separates the powertrain (energy source plus converter) from the drivetrain, and explains why a power modulator sits between battery and motor. Moves on to wide band gap materials (silicon carbide, gallium nitride), magnets in motors and the induction, PMSM and related motor types used.

    Chapters
    • 20:11Powertrain versus drivetrain and the role of the power modulator
    • 23:30Wide band gap switches, magnets and motor types
    • 28:08Layout of a plug-in EV and its power electronics
  4. 30:045 min · 1 chapter

    DC-DC converter and the auxiliary battery

    Takes answers from the chat on what a DC-DC converter is for, then explains that the high-voltage traction battery is left to drive the motor while an auxiliary battery feeds headlights, wipers and infotainment. A DC-DC converter steps the voltage down to 12 V.

    Chapters
    • 30:04Why an EV needs a DC-DC converter for the auxiliary battery
  5. 34:4240 min · 6 chapters

    Simulink buck converter: laptop charger design

    Uses a laptop charger (AC-DC rectifier then a step-down stage, 19 V output) as the example. Lists the Simulink blocks needed, then calculates the input voltage and the duty cycle D = Vout/Vin, enters it in a constant block, and works out the inductor current and load resistance before assembling the circuit.

    Chapters
    • 34:42Demo problem: the converters inside a laptop charger
    • 39:27Simulink blocks needed for a buck converter
    • 46:14Design step 1: input voltage and duty cycle
    • 54:48Design step 2: inductor current, ripple and load resistance
    • 59:38Design step 3: inductor and capacitor sizing
    • 1:05:18Assembling the model: sources, measurements and scope signals
  6. 1:14:216 min · 2 chapters

    Reading the buck converter results

    Runs the model and reads the scope: output voltage near 19 V with a small ripple, and MOSFET, diode and inductor currents. The diode conducts when the MOSFET is off and the inductor current rises while the switch is on. Points to the full charger model with rectifier stage for practice.

    Chapters
    • 1:14:21Running the simulation and reading the scope
    • 1:18:03Full laptop charger model and practice with a 48 V to 12 V converter
  7. 1:20:277 min · 3 chapters

    Traction inverter, onboard charging and vehicle-to-grid

    Describes the traction inverter as the motor controller (DC to AC, six or more switches, space vector PWM) and its role in regenerative braking. Then covers onboard AC-DC charging at levels 1 and 2, off-board DC fast charging, and bi-directional converters for vehicle-to-grid.

    Chapters
    • 1:20:27Traction inverter and motor control
    • 1:23:11Electrified vehicle systems and onboard charging (levels 1 and 2)
    • 1:25:05Off-board DC fast charging and vehicle-to-grid
  8. 1:27:019 min · 2 chapters

    Hardware design flow and industry trends

    Walks through the design flow from specification to simulation, prototype, validation and bill of materials, and shows a power module with six IGBTs plus control, sensor and isolation cards. Closes with the move from 400 V to 800 V batteries using silicon carbide and gallium nitride.

    Chapters
    • 1:27:01Hardware design process and what a power module looks like
    • 1:31:53Industry trends: 800 V batteries, SiC and GaN, closing remarks

Is the Scope of Power Electronics in EV course really free?

Yes. All 1 h 36 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 15 Apr 2023 and had 10,689 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Scope of Power Electronics in EV course take to finish?

The video runs 1 h 36 min across 25 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Simulink buck converter: laptop charger design" (40 min), so give it its own days.

Does the free power electronics course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Simulation and Design of Power Converters for EV (free lessons), then Power Electronics in EV Applications (₹40,000), then Post Graduate Program in Electric Vehicle Design & Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Which software is used in the Simulink buck converter demo?

The demo uses MATLAB Simulink; the instructor mentions version 2022a. The blocks come from the specialised power systems library (not the blue Simscape blocks): a MOSFET, a power diode, a pwm generator, a constant block for duty cycle, a DC voltage source and series RLC branches for the inductor, capacitor and resistor.

What do I need to know before watching this power electronics webinar?

The instructor expects a basic electrical background and some familiarity with how a buck converter looks, and invites anyone with Simulink open, from any branch, to build the model along. Anyone without Simulink can still follow the converter theory, the EV layout and the results discussion.

What does the buck converter demo in this webinar show?

It steps a DC input down to 19 V, the rating of a laptop adapter. The duty cycle is Vout/Vin, 19 / 141.4, about 0.134, here. The scope shows output near 19 V with a small ripple, and MOSFET and diode currents that alternate while the inductor current rises with the switch on.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Scope of Power Electronics in EV and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Scope of Power Electronics in EV course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.