Full course · free on YouTube · 1 h 4 min

Plastics engineering workshop: free 64-minute course

A single 64-minute instructor-led workshop recorded in April 2023, taught with slides and images, no software demo. It covers plastic types and processes, then injection moulding design features and defects, in 24 timestamped chapters.

24 chapters · published 10 Apr 2023 · 3,963 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive design students and early-career engineers who want to know how plastic parts are made and which design rules they follow.

What will you learn?

  • Tell thermoplastics from thermosets and name examples of each
  • Describe how injection moulding works, from hopper and screw to core, cavity and ejector pins
  • Name other plastic processes: rotational, blow, vacuum forming, extrusion and compression moulding
  • Explain why moulded parts need draft, and what an undercut does to ejection
  • Recognise ribs, screw bosses, heat stakes, dog houses and locators on a plastic part
  • Link defects such as sink marks, warpage, short shot and flash to their causes

What does each part of the course cover?

7 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:006 min · 4 chapters

    Plastics and why cars use them

    The agenda, what plastics are (polymers that can be moulded under temperature and pressure), where a car uses them, how plastic is derived from petroleum, the functional and assembly requirements of a plastic product, and why weight, corrosion resistance and finish favour plastic.

    Chapters
    • 0:00Introduction and agenda
    • 1:18What plastics are and where a car uses them
    • 2:38How plastics are made and what a plastic product design must meet
    • 4:46Why the car industry uses more plastic
  2. 6:113 min · 2 chapters

    Thermoplastics and thermosets

    Thermoplastics can be remoulded while thermosets cannot, with PET, polypropylene and polycarbonate as thermoplastic examples and epoxy, vinyl ester and bakelite as thermosets, plus the long list of polymers used in a car, such as ABS, polycarbonate, PVC and polyurethane, and where each is used.

    Chapters
    • 6:11Thermoplastics versus thermosets
    • 7:50Plastics used in a car and common polymer families
  3. 9:308 min · 4 chapters

    Plastic processing and injection moulding

    Which processes suit thermoplastics and thermosets, then injection moulding in detail (hopper, screw, core and cavity, lifters and side cores), followed by rotational moulding, vacuum forming, blow moulding, extrusion and compression moulding, and the injection stages and two-plate mould parts.

    Chapters
    • 9:30Plastic processing methods and which suit which material
    • 10:02Injection moulding: the process, core and cavity
    • 11:51Rotational moulding, vacuum forming, blow moulding, extrusion and compression moulding
    • 15:52Injection moulding stages and the parts of a two-plate mould
  4. 17:4410 min · 4 chapters

    Design parameters: tooling axis, draft and undercuts

    The tooling axis, draft angles of about 0.5 to 3 degrees on moulded faces, draft analysis shown as colour-coded surfaces, undercuts that block ejection, and the class A and B surfaces of a part such as a B-pillar trim.

    Chapters
    • 17:44Design parameters: tooling axis and draft angle
    • 21:58Draft analysis on a plastic part
    • 23:35Undercuts and how they affect ejection
    • 24:46Class A and B surfaces, and wall thickness
  5. 27:1821 min · 6 chapters

    Engineering features of plastic parts

    Ribs, screw bosses, heat staking, dog houses with push clips, and two-way and four-way locators: what each is for and which design values it needs, followed by a door panel back side where all of them appear together.

    Chapters
    • 27:18Ribs and their design rules
    • 31:25Screw bosses
    • 34:52Heat staking as a permanent plastic joint
    • 40:04Dog houses and push clips
    • 44:12Locators: two-way and four-way
    • 46:07All the features on a door panel's back side
  6. 48:0511 min · 3 chapters

    Moulding defects and good design practice

    Sink marks from poor rib and wall design, shrinkage and shrinkage allowance on the mould, warpage, drag marks from too little draft, short shot, flash and jetting with ways to avoid each, then uniform wall thickness, fillets and coring out thick sections.

    Chapters
    • 48:05Defects: sink marks, shrinkage and warpage
    • 50:58Defects: drag marks, short shot, flash and jetting
    • 55:29Design practices: uniform wall, fillets and coring out
  7. 59:275 min · 1 chapter

    Advantages, disadvantages and close

    A closing summary of what plastics offer (versatility, low weight, corrosion resistance, finish, insulation, low manufacturing cost) and their drawbacks (recycling, one-time-use waste), and the speaker's view that engineers should design to reduce scrap.

    Chapters
    • 59:27Advantages and disadvantages of plastics, and close

Is the Understanding the Engineering Behind Plastics course really free?

Yes. All 1 h 4 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 10 Apr 2023 and had 3,963 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Understanding the Engineering Behind Plastics course take to finish?

The video runs 1 h 4 min across 24 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Engineering features of plastic parts" (21 min), so give it its own days.

Does the free plastic part design course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Basics of Plastics (free lessons), then Automotive Plastic Design using CATIA V5 (₹40,000), then Post Graduate Program in BIW Fixture and Plastic Design (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need software for this plastics workshop?

No. The session is slides and images shared on screen, with no software demo and no exercise files. The speaker talks through plastic types, processes, design features and defects. A basic idea of mechanical parts and manufacturing is enough to follow it.

What is the difference between thermoplastics and thermosets?

The speaker says thermoplastics can be remoulded and recycled, while thermosets cannot, because of their polymer structure. Examples given: PET, polypropylene and polycarbonate for thermoplastics; epoxy, vinyl ester and bakelite for thermosets. In the workshop the speaker pairs thermosets with compression moulding and thermoplastics with injection moulding and the other processes.

Why do plastic parts need draft angles?

Without draft, the metal mould scrapes the plastic as the part is ejected, leaving drag marks, wearing the tool and hurting surface finish. The speaker gives a general range of about 0.5 to 3 degrees, and shows a draft analysis that colours surfaces by whether the required draft is met.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Understanding the Engineering Behind Plastics and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Understanding the Engineering Behind Plastics course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.