Mold design using SolidWorks: free 1.4-hour course
A single 1 hour 26 minute video in four chapters: injection molding basics, mold design basics, design for manufacturing (DFM) and defects, and parting surfaces. It is theory taught with slides and animations; the narrator says the later sessions design the mold in SolidWorks.
4 chapters · published 29 Nov 2024 · 22,588 views as of 18 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and manufacturing engineering students, and design engineers, who want the theory of injection mold design before modelling a mold in SolidWorks.
What will you learn?
- Explain how injection molding works and what sets the mold cycle time
- Tell thermoplastics from thermosets and pick an engineering plastic from product requirements
- Name the parts of a two-plate mold and how a three-plate mold differs
- Calculate machine clamping force from projected area and injection pressure
- Run a DFM check and spot defects such as short shots, weld lines, sink marks and warpage
- Choose a flat, stepped, angled or profiled parting surface and allow for shrinkage
What does each part of the course cover?
4 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 3:5418 min · 1 chapter
Basics of injection molding
How the injection molding process works (hopper, screw, nozzle, core and cavity), the factors that set mold cycle time, thermoplastics versus thermosets, other plastic processing methods, the mold industry in cars, and how to choose among engineering plastics.
Chapters
- 3:54Basics of injection molding
- 22:2217 min · 1 chapter
Basics of mold design
The product development process and the departments in a mold maker (sales, DFM, mold flow, tool design, CAM), the parts of a two-plate mold and their standard dimensions, the three-plate mold, and why plastic parts need draft angles and sensible parting lines.
Chapters
- 22:22Basics of mold design
- 39:3229 min · 1 chapter
DFM and defects
Machine tonnage and the clamping force formula, the DFM checklist (shrinkage, wall thickness, deep holes, undercuts, ejector pads, flow length, balanced mold blocks), then the defects: short shot, flash, weld lines, sink marks, jetting, burn marks, warpage and others.
Chapters
- 39:32Design for manufacturing (DFM) and defects
- 1:08:3618 min · 1 chapter
Parting surfaces
What a parting surface is, its four types (flat, stepped, angled and profiled), example parts where the choice avoids undercuts or hides the parting line, matching draft between steel blocks, how to scale a mold for shrinkage, and core and cavity inserts.
Chapters
- 1:08:36Parting surfaces
Is the Mold Design using SolidWorks course really free?
Yes. All 1 h 27 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 29 Nov 2024 and had 22,588 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Mold Design using SolidWorks course take to finish?
The video runs 1 h 27 min across 4 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "DFM and defects" (29 min), so give it its own days.
Does the free mold design course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Mold Design using SOLIDWORKS (free lessons), then Mold Design using SOLIDWORKS (₹40,000), then Post Graduate Program in Manufacturing Design (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Is this mold design course hands-on in SolidWorks?
No. This video is the theory part: slides and animations on injection molding, mold parts, DFM, defects and parting surfaces. The narrator says the first sessions cover the theory and the subsequent sessions design the mold in SolidWorks. It does not show SolidWorks modelling, so SolidWorks is not needed to follow it.
Do I need to know injection molding before starting?
No. The first chapter starts from what injection molding is, with an animation of the hopper, screw, nozzle, core and cavity. It then covers the mold cycle, thermoplastics and thermosets and other processing methods. No prior mold design knowledge is assumed in the video.
How do you calculate the tonnage of an injection molding machine?
Chapter 3 gives the formula as projected area times injection pressure divided by 1,000, with area in cm squared and pressure in kg per cm squared. The worked example uses 35 cm squared and 500 kg per cm squared for ABS, giving 17.5 tons, then you pick the next larger machine size.
Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course