Full course · free on YouTube · 8 h 34 min

Multibody dynamics in MotionView and MotionSolve: free, 8.6 hours

A single 8.6-hour video that starts with getting and installing the HyperWorks Student Edition, then works through MotionView and MotionSolve chapter by chapter. Each chapter has a theory part and a demo exercise, building from a free-falling body to a four bar mechanism, a cam follower, bearing contacts, a flexible control arm and a simple car model.

30 chapters · published 22 Nov 2024 · 5,711 views as of 18 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive engineering students and engineers who want to learn multibody dynamics in Altair MotionView and MotionSolve; it starts from installing the software and its interface.

What will you learn?

  • Request and install the HyperWorks Student Edition, as shown at the start of the video
  • Build rigid bodies, points, graphics, markers and outputs in MotionView, run MotionSolve and plot in HyperGraph
  • Add joints and motions, check degrees of freedom and remove redundant constraints in a four bar mechanism
  • Apply a driving torque and a BISTOP function, and compare kinematic and dynamic results
  • Set up a cam follower with a curve-to-curve joint and a ball bearing with 3D contacts
  • Replace a rigid lower control arm with a flexible body made in Flex Prep, with stress and strain recovery
  • Assemble a simple car from systems, attachments, data sets and couplers

What does each part of the course cover?

9 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.

  1. 2:4429 min · 5 chapters

    Getting HyperWorks, the first session and a free body

    Requesting the HyperWorks Student Edition, installing it and adding the licence file. Then a first demo opening a session file with HyperView and HyperGraph windows, and a second exercise creating a free body with mass and inertia and running a one-second fall under gravity.

    Chapters
    • 2:44Applying for the HyperWorks Student Edition
    • 4:30Licence request: an important step to complete
    • 5:12Installing Altair HyperWorks on your desktop
    • 8:42Chapter 1 demo: opening a session and the post-processing windows
    • 24:18Chapter 2 demo: building and simulating a free body
  2. 31:2451 min · 4 chapters

    Points, geometry, bodies, markers and outputs

    Hard points (single and symmetric pairs), point macros and parametric expressions, then adding a cylinder graphic to the free body. Next come initial velocities, markers as coordinate systems, the six output types and a plotted check against marker displacement, plus the basic entity types.

    Chapters
    • 31:24Chapter 3 theory: points, expressions and geometry
    • 52:32Chapter 3 demo: points and a cylinder graphic on the free body
    • 58:42Chapter 4: initial conditions, markers and outputs
    • 1:16:58Chapter 2 theory: bodies, basic entities and collectors
  3. 1:22:0936 min · 2 chapters

    Constraints, joints, motion and the MBD process

    Degrees of freedom of a rigid body, how joints and motions remove them, and building a simple pendulum with a revolute joint, an initial velocity and an expression-driven motion. Then the process from MotionView to MotionSolve, the MDL model file and the result file types.

    Chapters
    • 1:22:09Chapter 5: constraints, joints and motion (simple pendulum)
    • 1:46:46Chapter 6: MBD process overview and file formats
  4. 1:57:431 h 57 min · 6 chapters

    Four bar mechanism and the car trunk

    Redundant constraints and joint primitives, then extending the pendulum into a four bar mechanism with hard points A to F, three revolute joints and a MOTION torque output. A driving torque and a BISTOP expression follow, and the finished mechanism is attached to a car body and trunk lid imported from CAD.

    Chapters
    • 1:57:43Chapter 7 theory: redundant constraints, joint primitives and the MOTION function
    • 2:09:28Chapter 7 demo: four bar mechanism, part 1 (removing redundant constraints)
    • 2:35:28Chapter 8 theory: forces, the BISTOP function and the AZ/WZ functions
    • 2:41:11Chapter 8 demo: four bar mechanism, part 2 (driving torque and BISTOP)
    • 3:01:17Chapter 9 theory: importing CAD/FE models and curves, collision detection
    • 3:25:41Chapter 9 demo: four bar mechanism, part 3 (car trunk mechanism)
  5. 3:54:2736 min · 2 chapters

    Higher pair constraints and the cam follower

    The higher pair constraints (point to curve, curve to curve, point to deformable surface and others) and when they can stand in for contact modelling. The demo adds a cam profile curve and a curve-to-curve joint to a part-built cam and roller follower, then plots the joint reaction.

    Chapters
    • 3:54:27Chapter 10 theory: higher pair constraints
    • 4:07:56Chapter 10 demo: 2D cam mechanism with a curve-to-curve joint
  6. 4:30:521 h 14 min · 2 chapters

    3D contact modelling and a ball bearing

    How MotionSolve handles 3D contacts: meshed surface geometry, element normals, the impact contact model, coefficient of restitution, Coulomb friction and convergence tips. The demo imports a parasolid ball bearing, creates ball-to-race and ball-to-rim contacts, drives it with a motion and plots contact force and penetration.

    Chapters
    • 4:30:52Chapter 11 theory: 3D contact modelling
    • 5:12:55Chapter 11 demo: ball bearing contacts
  7. 5:44:4259 min · 3 chapters

    Flexible bodies and the lower control arm

    Why use flexible bodies, modal superposition and the three component mode synthesis methods, with advice on when to use each. The demo runs Flex Prep on a left lower control arm with stress and strain recovery, mirrors it to the right, swaps both into a suspension and runs the analysis.

    Chapters
    • 5:44:42Flexible bodies, theory 1: why flexible bodies and CMS methods
    • 6:03:25Flexible bodies, theory 2: choosing a CMS method and using Flex Prep
    • 6:20:11Flexible bodies demo: flexible lower control arm
  8. 6:43:3659 min · 3 chapters

    Systems, attachments, data sets and a simple suspension

    Modular model building with container entities, systems, export and import, and spring dampers. Then attachments, explained with a port analogy and a function-argument analogy, and data sets. The demo adds a spring damper and graphics to a simple car model and exports the suspension as a system.

    Chapters
    • 6:43:36Chapter 13 theory: container entities, systems and spring dampers
    • 6:58:13Chapter 14 theory: attachments and data sets
    • 7:20:26Chapter 13 demo: simple car model and a reusable suspension system
  9. 7:42:3852 min · 3 chapters

    Vehicle assembly, couplers and steering

    Importing a vehicle body system, adding attachments so the suspension takes its location from it, a rear suspension and a data set of vehicle parameters. Then system initial conditions, couplers, and a steering system with a road, run as a static plus transient simulation.

    Chapters
    • 7:42:38Chapter 14 demo: rear suspension, vehicle body and vehicle parameters
    • 8:10:28Chapter 15 theory: system initial conditions and couplers
    • 8:15:50Chapter 15 demo: steering system, couplers and road

Is the Multibody Dynamics for Automotive Applications using MotionView and MotionSolve course really free?

Yes. All 8 h 34 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 22 Nov 2024 and had 5,711 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Multibody Dynamics for Automotive Applications using MotionView and MotionSolve course take to finish?

The video runs 8 h 34 min across 30 chapters. At one hour a day that is about 9 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Four bar mechanism and the car trunk" (1 h 57 min), so give it its own days.

Does the free MotionView and MotionSolve course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Multibody Dynamics for Automotive Applications using Motionview and Motionsolve (₹40,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need a licence to follow the MotionView and MotionSolve course?

The video opens with how to get the HyperWorks Student Edition: search for it, fill in the request form (a personal email works if you have no university address), and paste in your ethernet host ID. Altair then emails a licence file and download links. The narrator says approval can take 2 to 3 days, and a later note says up to one to two weeks, so apply early.

Is this MotionView course suitable for beginners?

It starts from scratch: after the install it begins with the MotionView interface and a single free body falling under gravity, then adds points, markers, joints and forces one chapter at a time. Each chapter has a theory part followed by a demo exercise, so you can build the same models alongside it.

Which models are built in this multibody dynamics course?

A free body, a simple pendulum, a four bar mechanism attached to a car trunk lid, a 2D cam and roller follower, a ball bearing with 3D contacts, a suspension with a flexible lower control arm, and a simple car with front and rear suspension, steering and a road.

Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Multibody Dynamics for Automotive Applications using MotionView and MotionSolve and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Multibody Dynamics for Automotive Applications using MotionView and MotionSolve course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.