Introduction to automation for engineers: free, 47 minutes
One recorded webinar of about 47 minutes, published in February 2023 and led by Skill-Lync technical expert Hariharan. It covers FEA and meshing fundamentals first, then a live HyperMesh demo of a Tcl/Tk script.
24 chapters · published 1 Feb 2023 · 3,046 views as of 20 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and CAE students and beginners who want to see what process automation is and how a Tcl/Tk script drives HyperMesh.
What will you learn?
- Explain what process automation is, using a repeated screenshot task as the example
- Name the four steps of FEM: physics, pre-processing, solution and post-processing
- Tell static, dynamic, linear and non-linear analysis apart
- Describe what meshing does and why mesh quality affects accuracy
- Say what the HyperMesh command file records and how it relates to Tcl/Tk
- Follow a short Tcl/Tk script that loops over components and saves one image each
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:008 min · 3 chapters
Introduction, product development and FEA basics
The speaker lists the topics, then uses a phone to explain the product development life cycle, structural and CFD validation, and what FEA is: a physical model discretised into nodes and elements, which become numerical equations solved with boundary conditions.
- 7:355 min · 2 chapters
What process automation is, with a screenshot example
Process automation is defined through two examples: tracking monthly expenses with a short program, and capturing report images of a 500-component assembly. The speaker estimates one minute per image, so about 500 minutes by hand, against a 5 to 15 line script.
- 12:316 min · 4 chapters
Analysis methods and the four steps of FEM
Experimental, analytical and numerical methods are separated, with finite element placed under numerical. The four FEM steps are physics, pre-processing, solution and post-processing, illustrated by a phone drop test and a crane, then where automation can and cannot be applied.
- 18:166 min · 3 chapters
Why CAE is used and where
Compares what a simulation gives against hand calculation or lab tests: a response at any location, failure cases that are impractical to test, and a change of material in one or two clicks. Then CAE across industries, with the Delhi to Mumbai route analogy.
- 24:376 min · 3 chapters
Types of analysis and automating repeated runs
Static versus dynamic, then linear versus non-linear using the stress-strain curve, contact, material and geometric non-linearity. A frontal car crash example leads to looping a simulation over materials, thicknesses and velocities, with Python, Tcl/Tk or MATLAB named as coding options.
- 30:485 min · 3 chapters
Governing equation, meshing and boundary conditions
Writes the governing equation with mass, damping and stiffness terms and shows how the static case simplifies. Meshing is explained as reducing infinitely many points to a finite set of nodes, with mesh quality tied to accuracy, then essential (fixed displacement) and natural (applied load) boundary conditions.
- 36:084 min · 2 chapters
HyperMesh tour and the manual screenshot routine
In HyperMesh the speaker points out the title bar, menus, toolbars, graphics area, tools panel and browser, and the Ctrl-mouse rotate, pan and zoom. A suspension assembly of about 120 components is used to show how slow isolating and saving one screenshot is.
- 39:527 min · 4 chapters
Tcl/Tk script that saves a screenshot of every component
The HyperMesh command file records each action, such as rotating or fitting the screen, as lines of code. The speaker then explains a short Tcl/Tk script (file mkdir, a foreach loop over components, isometric view, save) and runs it, reporting 120 screenshots in about a minute.
Is the Introduction to Automation for Engineers course really free?
Yes. All 47 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 1 Feb 2023 and had 3,046 views as of 20 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Introduction to Automation for Engineers course take to finish?
The video runs 47 min across 24 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Introduction, product development and FEA basics" (8 min), so give it its own days.
Does the free HyperMesh Tcl/Tk course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Automation using TCL/TK for HyperMesh (₹40,000), then Post Graduate Program in Automation & Pre-Processing for FEA & CFD Analysis (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need coding experience to learn Tcl/Tk automation for HyperMesh?
The speaker says you do not need prior coding knowledge to learn this kind of automation, only some interest. Python, Tcl/Tk and MATLAB are named as tools that can be used. In the demo the speaker walks through a script of about 13 to 15 lines at overview level rather than line by line.
What does the HyperMesh automation demo do?
It loops over the roughly 120 components of a suspension assembly. For each one the script sets a title from the component name, isolates the component, switches to an isometric view, fits the view and saves a screenshot to a folder. The speaker reports that the run took about a minute.
What is the HyperMesh command file mentioned in the webinar?
The speaker describes a command file where HyperMesh records the work done. In the demo, rotating the model and pressing F to fit the screen each add new lines of code. The speaker presents these recorded keywords as the starting point for understanding Tcl/Tk.
Last updated 20 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 20 Nov 2026 · Grow by Skill-Lync: free lessons from every course