Full course · free on YouTube · 1 h 5 min

GD&T basics: free workshop, 65 minutes

A single 65-minute live workshop by an instructor, run on slides and annotated drawings. It covers the history of GD&T, where it is used, a walk through the symbols, two worked drawing examples and a short Q&A.

13 chapters · published 2 Apr 2023 · 31,959 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical, design and manufacturing students and early-career engineers who want to know what GD&T is for and how to read a basic tolerance frame on a drawing.

What will you learn?

  • Explain why geometric tolerances were introduced, using the 1939 torpedo parts story
  • Say what a size tolerance cannot control and what a form tolerance such as straightness or flatness adds
  • Recognise that straightness is a tolerance band and does not need a datum, while parallelism and perpendicularity do
  • Describe maximum material condition for a hole and for a shaft
  • Spot missing dimensions, assumed angles and chain dimensioning on a drawing
  • Read datums A, B, C and D on a plate and see how they set the machining order

What does each part of the course cover?

6 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0011 min · 3 chapters

    Why GD&T exists: the history

    The agenda, then the story of Stanley Parker at a Royal Navy torpedo factory in Scotland in 1939, where the speaker says about 30 percent of parts were rejected although they worked. The square tolerance zone is contrasted with a circular one, followed by the military and automotive society handbooks that led to a shared standard.

    Chapters
    • 0:00Introduction and agenda
    • 2:04History: Stanley Parker and the 1939 torpedo parts
    • 5:19History: military and automotive handbooks toward a shared standard
  2. 10:5514 min · 3 chapters

    Where GD&T is used and what it controls

    Design, manufacturing and quality are given as the three domains that need GD&T, with a language-and-grammar analogy. Then a shaft-in-hole story: size limits alone still left 30 percent of parts not fitting until a datum and a form tolerance were added.

    Chapters
    • 10:55Domains of use: design, manufacturing and quality
    • 17:38What GD&T is: a philosophy for functional parts
    • 21:19Size tolerance versus geometric tolerance: the shaft-and-hole story
  3. 24:4510 min · 2 chapters

    Reading the GD&T symbols

    A quick tour of the form, orientation and location symbols: straightness (no datum needed, a band rather than plus or minus), flatness, circularity, cylindricity, parallelism, perpendicularity and angularity. Profile and position are introduced, with a note that profile covers several lower-order controls.

    Chapters
    • 24:45Symbols: straightness, flatness, circularity, cylindricity, parallelism
    • 32:39Angularity, profile, position and runout
  4. 35:0412 min · 2 chapters

    Flange drawing: fixing a drawing step by step

    A flange drawing is checked for missing dimensions. The four holes' 90 degree spacing gets a tolerance instead of an assumption, chain dimensions are replaced to avoid tolerance stack-up, and position, perpendicularity and flatness-on-datum controls are added in turn.

    Chapters
    • 35:04Flange example: missing dimensions and angle tolerance
    • 39:25Flange example: locating features and applying datums
  5. 47:1411 min · 2 chapters

    Size, location, orientation, form and a datum-driven plate example

    The size, location, orientation and form checklist, applying GD&T only to functional areas, and the steps of listing functions, choosing datums, then adding tolerances. A steel plate with a block, four small holes and a large central hole shows how datums A, B, C and D fix the machining order.

    Chapters
    • 47:14Size, location, orientation and form; how to apply GD&T
    • 50:13Plate example: datums and machining sequence
  6. 58:416 min · 1 chapter

    Recap and audience questions

    A recap on interchangeability of parts made in different places, then answers on primary, secondary and tertiary datums, how to measure perpendicularity, how a hole axis is used as datum D with a dial gauge on a milling machine, and where least material condition is used.

    Chapters

Is the Geometric Dimensioning & Tolerancing course really free?

Yes. All 1 h 5 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Apr 2023 and had 31,959 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Geometric Dimensioning & Tolerancing course take to finish?

The video runs 1 h 5 min across 13 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Where GD&T is used and what it controls" (14 min), so give it its own days.

Does the free GD&T course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Geometric Dimensioning and Tolerancing (free lessons), then Geometric Dimensioning and Tolerancing (₹40,000), then Post Graduate Program in CAD (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

What is GD&T and why do engineers use it?

In this workshop GD&T is described as a way of accurately describing a part and a form of technical communication from design to manufacturing to inspection. Size tolerances alone can leave a bent or wavy part inside its limits, so geometric tolerances control shape, orientation and location, and are applied only to functional features.

Do I need CAD software or prior knowledge for this GD&T workshop?

No software is used. The instructor works through slides and annotated drawings, and does not state prerequisites. Basic engineering drawing knowledge, such as dimensions and views, helps. The instructor says the symbols are covered quickly and refers to a longer course for the detail, so this is an introduction rather than a full GD&T course.

What is the difference between a datum and a feature tolerance in GD&T?

A datum is the reference a measurement is taken from. In the plate example, datum A is the bottom surface, B the front and C the left side, and datum D is the axis of a small hole. The speaker adds that A is the primary, B the secondary and C the tertiary datum.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Geometric Dimensioning & Tolerancing and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Geometric Dimensioning & Tolerancing course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.