Introduction to Finite Element Analysis, free, 1 hour
This is a single 54-minute recorded webinar delivered as slides, with no software demonstration. After a spoken overview and a short welcome, it covers the basics of FEA and the inputs a simulation needs, then best practices, market trends, software tools and the skills to learn.
6 chapters · published 20 Dec 2024 · 21,133 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and other engineering students, and early-career engineers, who want a first look at what FEA is, how a simulation is set up and what skills the field asks for.
What will you learn?
- Explain why analytical, numerical and experimental methods each have limits, and where FEA fits among numerical methods
- Name the main types of analysis: linear static, nonlinear, dynamic, thermal, fatigue and crash
- List the four stages of an FEA project and what happens in pre-processing, solution and post-processing
- State the inputs a run needs: geometry and section properties, material properties, loads and supports
- Write the two-node spring stiffness matrix and explain why boundary conditions are needed to avoid a singular matrix
- Describe nodes, elements and degrees of freedom, and avoid common set-up errors such as stress singularities
What does each part of the course cover?
5 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.
- 3:2523 min · 1 chapter
Why FEA, types of analysis and the four stages
Explains why analytical, numerical and experimental methods each have limits, compares finite element, boundary element, finite volume and finite difference methods, and defines FEA as splitting a domain into elements and assembling their equations. Then covers the advantages, the types of analysis (linear static, nonlinear, dynamic, thermal, fatigue, crash) and the four stages: CAD, pre-processing, solution, post-processing.
Chapters
- 3:25Basic introduction to FEA: methods, advantages, types of analysis and stages
- 26:4919 min · 1 chapter
FEA inputs, the stiffness matrix, nodes and elements
Lists what a run needs: geometry and section properties by element type (area or moment of inertia for beams, stiffness for springs, thickness for 2D), material data, loads, supports and test data for a check. Then gives the solution steps, builds a two-node spring stiffness matrix from KU = F, and defines boundary conditions, nodes, elements, degrees of freedom and a mesh.
Chapters
- 26:49Inputs you need to run an FEA, the stiffness matrix, nodes and elements
- 45:402 min · 1 chapter
Best practices in FEA modelling
A short list of habits: set the simulation up to match the real case, verify the material properties, avoid applying a load to a node or a small edge because it produces a stress singularity, choose the element formulation with care, and check that the results converge.
Chapters
- 45:40Best practices in FEA
- 47:272 min · 2 chapters
Current trends and growth opportunities
A brief market overview using 2019 figures. The speaker says cloud-based systems, larger storage and faster solvers are increasing the amount of FEA work, that automotive held the dominant share, and that aerospace was expected to grow fastest. The speaker concludes that it is a good time to start an FEA career.
- 49:254 min · 1 chapter
Software tools, industries and what to learn
Reads out a list of FEA software, then names the industries that use FEA, among them aerospace, automotive, construction, medical devices and consumer electronics. Closes with a learning path of FEA theory, modelling practice and then software, plus the background subjects the speaker recommends, such as statics, mechanics of materials and machine design.
Chapters
- 49:25Software tools used in FEA, industries and skills to learn
Is the Introduction to Finite Element Analysis (FEA) course really free?
Yes. All 54 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 20 Dec 2024 and had 21,133 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Introduction to Finite Element Analysis (FEA) course take to finish?
The video runs 54 min across 6 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Why FEA, types of analysis and the four stages" (23 min), so give it its own days.
Does the free FEA course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Basics of FEA - Explicit and Implicit FEA (₹40,000), then Post Graduate Program in CAE (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Does this FEA course teach any software?
No software is demonstrated. The webinar is slides and explanation. Near the end the speaker reads out a list of FEA tools, including Abaqus, Ansys and HyperMesh, and says that learning to use the software can come later, once you have FEA theory and good modelling practice.
Is this FEA course for beginners?
Yes. The speaker calls it a basic introduction and says FEA is a very vast subject. The speaker recommends background knowledge of statics, mechanics of materials, dynamics, machine design and engineering graphics, and says the theory in the talk is only a start.
What is the stiffness matrix in FEA?
The speaker builds it from a spring with two nodes. Force equilibrium at each node gives a 2 by 2 matrix, written as KU = F, with K the stiffness, U the nodal displacements and F the nodal forces. Without supports the matrix is singular, so boundary conditions are required.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course