Lesson finished
Up next: Moment Rotation Diagram and Force Flow in Shear and Moment Joints
Unlock all 35 lessons of Structural steel connections using RAM ConnectionsFull course ₹40,000 · paid
Steel Member Joints: Rigid, Semi-Rigid and Hinged Connections
A free lesson from Skill-Lync's Structural steel connections using RAM Connections course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Structural Steel Connection Design Using RAM Connections”
What will you learn in this free Structural steel connections using RAM Connections lesson?
The instructor introduces the week's topics and defines a steel connection as the path force takes from lower to higher stiffness members. The lesson lists beam, column and bracing joints, base plates and embedded plates, then explains rigid, semi-rigid and hinged joints with examples.
- Force flows from lower to higher stiffness
- Beam, column and bracing joint combinations
- Base plates and embedded plate joints
- Rigid, semi-rigid and hinged joint examples
What comes after lesson 1?
The next free lesson is lesson 2, “Moment Rotation Diagram and Force Flow in Shear and Moment Joints” (18 min). Later in Skill-Lync's Structural steel connections using RAM Connections course (paid): lesson 4, Design of Fillet Welded Shear Joint as per IS 800:2007; lesson 5, Structural Steel Connections Design using RAM Connection; lesson 6, Design of Moment Connection as per IS 802:2007. The full course has 35 lessons (17 h 18 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
You are welcome to the course module of Structural Steel Connection Design using RAM Connections. This is a course specifically designed to bridge the gap between methodical and theoretical concept of connection design to commercially applied softwares and how to use them. In this course, we will cover RAM Connections at Depth. This is Week 1, Concept of Steel Connections and Types of Connections. Start of Session 1, Table of Contents. In this week, we will be studying steel member joints and their types, such as rigid joints, semi-rigid joints and hinged joints on a larger scale.
We will be studying on how the force flows through connections, type of other connections, difference between shear and moment connections, design of a bolted shear connection as per IS800-2007 and applicable clauses from the code. We will also learn design of welded shear connection as per IS800-2007. The learning objective for this week is to have the understanding of different types of steel member joints, understanding the concept of force flow through connections, differences between shear and moment type connections, and a basic understanding of design of bolted shear and welded connections.
Coming to the next part, steel member joints. What are steel member joints or connections? A steel member connection is defined by means of transferring forces from lower moment of inertia to higher moment of inertia via moment, shear and axial forces. If we look into further deeper into this statement, we understand that any structure will have certain amount of secondary and primary members, the primary load carrying members. Those will transfer forces into a further stiffer members into a further stiffer member such as columns or higher deep beams.
In this case, girder. So, what happens? The force has to flow from the load carrying member into the load bearing members and by means of which what we call it as steel joint connections. The force has to flow through secondary or primary member into a higher stiffness of members. Coming to the next point, which is the unique characteristics of force. The unique characteristic is that it travels from lower stiffness to the higher stiffness. On general account, this stands true that the force will always flow from lower stiffness to the higher stiffness.
That's why you may understand or realize that we will have planned secondary members lesser depth or lesser section from the primary members. And the primary members, when connecting to a column or an axial member, they also have the difference in the moment of inertia into that particular direction. Otherwise, the force will never flow into the foundation. Concept of structure to be stable is to have the forces distributed equally and evenly into all the stiffness members and then get it transferred to the column. So, the unique characteristic of force is that it flows from lower to higher stiffness.
The next point of and characteristics of joint is that steel member joints, it can be made between beam and columns. It can be made between beams and beams. Then, a column to beam connection also is possible. Column to column connections, which are basically splice connections, such as similar to beam and beam connections. Then, there are bracing to beam connections, which are basically planar bracings. And then, there are bracing to column connections, which are the elevation bracings. In this slide, we are going to discuss about unconventional joints.
Generally, the classification is of two types. Joint that connect steel to concrete piers, slabs or foundations, such as column to concrete joints. First classification of this, I am trying to explain the concept of base plate. A base plate is not a typical steel to steel connecting joint. It is a steel to concrete connecting joints. So, the first interface of force flow into the foundation. The base plate can be connected into pier or baristal slabs or foundations. And the base plate can be welded into the end of the column or end sides of the beams.
Both equally can be connected into the concrete by the means of anchor rods and shear key. The second classification is that the joints which connect steel element to embedded steel plates in the concrete. Example, embedded plates joints, commonly termed as hybrid joints. So, in this case, what happens is that a steel plate with anchor studs welded gets cast alongside the concrete. So, the steel plate and the concrete surface will have same plane. Once the concrete is set and the steel plate also is set with the concrete, then it allows any engineer to weld any base plate, be it a base plate for a beam, be it a base plate for a column, to directly weld at site so that it doesn't give us any protrusion of anchor rods or anything for that matter.
Moving on, types of theoretical joints. Here, on this slide, we would like to understand what are the classification of theoretical joints that are generally used during analysis of steel structure. Joints can be largely classified according to their rotational stiffness and consequent capacity of transferring a bending moment. With respect to this, joints are classified as rigid joints which are fully restrained against rotation, semi-rigid joints, semi-rigid joints, which behaves intermediately, and hence joints which allows rotation. Moving on, a rigid joint. What is a rigid joint? A joint between structural members which is fully restrained against rotation is called a fixed or a rigid joint.
If you follow my cursor and see that beam column seating angle joint is shown over here, this connection has a cleat flange at the top and a seating angle at the bottom. These two elements act together in a system to not allow rotation of the member at this joint. Similarly, if you look into this beam column cap-flit joint, the beam is run on top of this column with a base plate at the bottom and with some stiffness on either side of the beam. This allows the beam not to have any rotation at this joint, hence allowing it to transfer the bending moment into the column.
And if you can come to the next point, which says the key features of rigid joints are that rotation in the joint are not allowed and momentum shear forces are transferred through the joint. Another example of beam-column fixed joint is shown on this picture. In this slide, we are going to discuss about semi-rigid joints. What are semi-rigid joints? A joint between structural members which is partially restrained and allows yielding of the connection to some extent. Key features of these semi-rigid joints Rotation in the joints are partially allowed and momentum shear forces are transferred.
So if you follow my cursor, we can understand by observing this first picture which is a top and bottom plate beam-column joint. The beam is connected into the flange phase of the column with the help of top and bottom flange plate and a shear-dab connection. This will allow the beam to have some amount of rotation although most of its moment and shear forces gets transferred through this mechanism. Coming to the second example, here is a side view of that particular connection where beam and column are connected by the means of a shear-dab connection and a seating angle joint.
The seating angle helps the beam transfer bending moment but also the setback of the beam from the face of the column flange will allow some amount of rotation as there is no top flange connection of the beam to the column. Coming to the third diagrammatic sketch, this is a beam-column end plate joint where the beam is welded directly onto the end plate and the end plate is bolted on the face of the column flange. Because of the lack of the stiffener at the bottom of the beam and the end plate joint, we will observe that the beam will have some amount of rotation into that joint.
Moving on. This slide. we are going to understand and discuss about hinged type of joints. Hinged or commonly known as pinned joints are a joint between structural members which is not restrained against rotation. So basically hinged joints key features are that the rotation in the joints are allowed and shear and axial forces are only transferred. So there is no moment transfer through this joint. So basically these joints are called as shear connection as a common and general term of use. The first joint which we are going to understand is a fin plate beam to column. In this case this secondary beam is connected to a primary beam or a girder by the means of a shear dab or a fin plate connection where the fin plate is welded onto the web of the beam girder.
And the connection between secondary member and the fin plates are done by the means of bolts. Similarly beam to column double angle joints where cut piece of any angle are provided on either side of the secondary or primary member of the beam. And all those connections are completed by means of bordered connections. This is another joint which is beam to beam shear joint by the means of angles.