Lesson finished
Unlock all 17 lessons of Overview of 4G Networks and evolutions to 5GFull course ₹40,000 · paid
LTE Initial Cell Search: PSS, SSS, MIB and SIB Messages
A free lesson from Skill-Lync's Overview of 4G Networks and evolutions to 5G course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 3”
What will you learn in this free Overview of 4G Networks and evolutions to 5G lesson?
The instructor explains how a phone finds a cell, using PSS to give one of three identities and SSS to give one of 168 groups, which together give the physical cell ID. The lesson then covers MIB contents and timing, and SIB1 through SIB12.
- PSS and SSS and physical cell ID detection
- Positions of synchronization signals in time and frequency
- MIB contents, periodicity and position
- Purpose of SIB1 to SIB12
What comes after lesson 3?
Later in Skill-Lync's Overview of 4G Networks and evolutions to 5G course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 17 lessons (7 h 11 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hi. In this course, overview of 4G networks and evolutions to 5G. Week 1. Let's do a quick recap whatever we discussed in the last session. So in the last session we discussed about various protocol stacks where we discussed about protocol stack for control and protocol stack for user plane. So as part of control plane, we saw a few protocol stacks which were mainly for the control plane and there were some specific protocols which were mainly for the user plane. And most of them were common for both control and user plane.
Then we discussed about channel. What is a channel? What does it carry? And why there are different channels? And we discussed about three types of channel. Physical, transport and logical. So logical is between RLC and MAC. Transport is between MAC and PHY. And from PHY to the UV, there is physical channel for the air interface. Then we discussed about the mapping. How these channels are being mapped. What channels from logical maps to what transport and what transport map to physical in downlink. And similarly in uplink, we discussed about what physical channel maps to what transport and what transport maps to what logic.
So these are the table of contents for today's session. So today we'll be discussing about initial cell search. So first, we'll quickly recall the frame structure and the resource block that we have already discussed. But here we'll recall so that it will be easier to map the positioning when we'll discuss the positioning in the time domain and in the frequency domain of the signals. It will be easier for us to map. So we'll discuss about synchronization signals. We'll discuss about primary synchronization and the secondary synchronization signals.
Then we'll discuss about the positioning where the signals are being transmitted in the air interface and how UE comes to know what is the position of the signals. Then we'll discuss about MIBs. So MIB is a master information block. We'll discuss about the content of the MIB. We'll discuss about the periodicity of the MIB and the positioning of the MIB. Then we'll discuss about SIEB1. Similarly, in the SIEB1, what is the content of SIEB1? What is the positioning periodicity of SIEB1? And then we'll touch upon rest all SIEBs from SIEB2 to SIEB12 one by one.
And then at the end of the session, we'll just summarize. We'll do a quick summary, whatever we'll be discussing today. So these are the learning objectives for the student to understand the synchronization process, how the physical cell ID detection happens in case of LTE. Then to be familiar with LTE initial cell search, including concepts like synchronization signals, master information block, various system information block, etc. So let's discuss about frame structure and resource block. So this is already we had discussed, but we'll just quickly recall it.
So this is the FDD type 1. So we discussed already like in FDD, we have 10 milliseconds radio frame and one radio frame is divided into 10 milliseconds, 1 millisecond each, which is called subframes. Here subframe size is 1 millisecond. And that 1 millisecond subframe is further divided into two parts, which is time slots, time slot 0 and time slot 1, each of 0.5 milliseconds. And one 0.5 millisecond time slots is divided into seven symbols, depending upon normal CP or extended. In extended, it will be six OFDM symbols.
So these are the resource block. So one of the slot we have picked. In one of the slot, there are seven symbols and one symbol in one subcarrier is called resource element. And this 84 resource element. So basically, this are seven OFDM symbols and this 12 subcarriers. Basically, 12 into seven is 84 resource element makes one resource block. Okay. Then this is the first topic for today's session is LTE initial cell search. So synchronization signals. So when the UV switch is on, okay, it needs to decode few information that it first it needs to know that what is a subframe, where the slot, where the radio frame is starting.
Okay. It has to deduce the boundary. Okay. So the synchronization signal helps UV deducing this information. So first it checks about the radio frame, achieve radio frame, subframe, slot and symbol synchronization in the time domain. It has to deduce the frame boundary. So it has to know where the frame is starting and where the frame is ending. So that that's a 10 millisecond radio frame. Then identify the central of the channel bandwidth in frequency domain. So here till here it is time domain. So in the frequency domain, it will come to know what is the center frequency.
Okay. Of that particular channel bandwidth. Then it will deduce the physical layer cell identity that is called a PCI, physical cell identity. Synchronization signals are broadcast within every 10 millisecond. So this both signals will be discussing about primary and synchronization. So these are available in each and every radio frame. So when we are saying 10 millisecond radio frame means one radio frame. So in each and every radio frame, the synchronization signals will be transmitted or broadcast. So first is PSS that is primary synchronization signals. So this achieves subframe, slot and symbol synchronization.
So basically this will give you the subframe information. Okay. And the slot information and the symbol. So still we have to find out the radio frame. Okay. Then it identifies the center of channel bandwidth in the frequency domain. PCI is organized into 168 groups of three. Okay. So the PCI is having 168 groups of three. Okay. So this PSS deduce a pointer towards one of the three physical layer cell identities. Okay. So basically PSS will give one of these three and then we have to find out the group out of 168.
So group will determine from the SSS that we will see in the next slide. So here it will just give one of these three. PSS is transmitted twice in every radio frame. Okay. So as we already discussed that it has to be transmitted in each radio frame. But how many times? So PSS will be transmitted two times in each radio frame. Radio frame synchronization cannot be achieved as both transmission within the radio frame are identical and equally expressed in the time. So what does it mean?
It means that we cannot achieve the radio frame synchronization because the PSS, the two instances of PSS whatever transmitted in the frame, both are identical, both are same. So if one is X, another is also X and both are equally spaced. So equally spaced means it is at 10 millisecond. So both are at 55 millisecond distance. Okay. So it will be difficult, you know, to find out which one is the first. Both are X and both are equal time, you know, spaced. So let's say if it would be something like X and Y, then we can tell the UE that or UE must be having understanding like if it is Y, then that is the start of the frame or if it is X, that is start of the frame.
But both are same, identical. So it cannot be. Right. Then next is SSS. Achieve radio frame synchronization. So that is what the radio frame synchronization purpose is solved by the SSS. To deduce a pointer towards 1 of 168. Okay. So there we saw that 1 of 3 we got from PSS and from SSS will get 1 of 168 physical layer identities group. When combined with the pointer from PSS, so this SSS whatever we got 1 of 168 and then whatever we had already got from PSS, when this combines both, it allows the PCI to be deduced.
It will give the actual PCI. So this is how a PCI detection happens in LTE. SSS is transmitted twice in every radio frame. So this is also same as PSS. There are notable differences between two transmission of SSS allows the UE to detect which is the, which is the first and which is the second. Okay. So there are notable differences between the two transmissions. So as we discussed in case of PSS, both are transmission same. But here, the both the transmission are different. So let's say at fifth subframe, I am sending X and as at 10 subframe, we are sending Y.
And UE is having already understanding that whichever is the X from there minus 5, you do and get the subframe 0. So basically that is a frame boundary, a radio frame boundary. So this is how the, you know, differences between these two transmission help decoding the radio frame boundary. Then synchronization signal positions. So both PSS and. CSS is broadcasted using the central 62 subcarriers in the frequency domain. Okay. So, basically, in the frequency domain, right, we checked the resource block. The resource block is part of, you know, frequency and time domain.
So, resource block, one resource block is having 7 OFDM symbol and 12 subcarriers, okay, in frequency domain. So, this guy is having 62 subcarriers in frequency domain. So, PSS and SSS, this takes total 62 subcarriers in frequency domain, okay. PSS belongs to the last symbol of time slot 0 and 10 and SSS belongs to the second to the last symbol of time slot 0 and 10, okay. So, time, in the frequency domain, you will find out that center 62 subcarriers, means, plus 32, plus 31 and plus 30, minus 31 is the center frequency.
That is in the frequency domain. But, in the time domain, so, let's say these are having 10 slots, sorry, in one radio frame, there are total 20 slots. So, as we discussed that it will be sent twice. So, in the 0th slot, you can see on the 0th slot, okay, not the subframe. This is the total subframe. In the subframe 0, 0th slot, symbol 5 is the SSS and symbol 6 is the PSS. So, last symbol of 0th slot is PSS and second last symbol of 0th slot is the SSS.
Similarly, in the subframe 5, slot 0, means, from starting, slot 10 is the, is containing the PSS and SSS. And same way, this slot also having sixth, the last symbol is PSS and second last symbol is SSS. So, this is the spec defined. So, UE is having prior understanding that where SSS and PSS will come in frequency domain and time domain, that this is how it detects it. Next is master information block, that is called MIB, broadcasted by Enode B, even if there is no presence of any user, okay.
So, this is, it means that it will always be broadcasted. When the Enode B is up, it will start broadcasting this MIB, regardless of any UE presence, okay. It has a periodicity of 40 milliseconds, means, it is, you know, broadcasted in every 40 milliseconds. There is a new transmission happening is every 40 milliseconds and repeats in every radio frame. So, every radio frame is 10 milliseconds, means, whatever I am sending in 0th, then that has to be repeated in next 4 radio frames, 10, 10, 10, 10.
And then, again, in the, after 40 millisecond, after 4 subframe, it, there will be a new transmission of master information block. That is, yeah, that is in the time domain. And the position is, MIB is transmitted in SF0, SF0, subframe 0, slot 1, first 4 symbols. So, if you go back to the last slide, so, this is your SF0, okay. In SF0, slot 1, first 4 symbols. So, SF0, slot 1, slot 1, first 4 symbols. This will be your MIB, but not from slot 0, it is from slot 1.
So, these are the contents of the MIB. These are fixed always. So, first, let's see the channel. When it comes from RLC to MAC, it comes over BCCS, that is the logical channel BCCS, it uses. Then it goes on the BCCS transport and then PBCS physical channel. This is how MIB gets transmitted. So, the content of MIB is DL bandwidth. So, from here, it will know, it will come to know about the bandwidth. So, these are the number of RBs, 6, 15, 25, 50, 75, 100.
This gives you the bandwidth. So, for example, if it has received N100, so, these all are basically, these are the enumerated, enumeration. So, N100 means 20 MHz. Similarly, N50 is 10 MHz. Then the PHICH config, PHICH is a HARC indicator channel config. This we'll see later. Just we need to understand here, it's a 3-bits information. Then the system frame number. So, you have got the slot synchronization, you have got the SF synchronization, you have found out the boundary. But what is the actual system frame number ongoing?
It could be 100, it could be, you know, 900, 875, anything it could be. So, the actual system frame number we send in the master information block, which takes 8-bits. And then these are the spare bits. Spare bits is, you can say, it's not being used. It is, you know, for future use or reserved for some other purposes. That is 10-bits. Then system information block 1. So, this is how we are going in the sequence. So, first it will decode the PSS. Then it will decode the SSS.
Then it will decode the MIB. Then it will decode the SIP 1 information. SIP 1 and SIP 2 both are mandatory SIPs in LTE. Rest all SIPs are optional. Okay. So, this contains cell access related information. So, whatever information required to access a particular cell, that will be contained by SIP 1. It contains other SIPs in scheduling information. Has a periodicity of 80 milliseconds and repeats after 20 milliseconds. So, then the difference you can understand here. In the MIB, it had a periodicity of 40 milliseconds and it was repeating is every 10 milliseconds.
So, in MIB, 0, 10, 20, 30 and 40 like that. And in SIP, 0, 20, 40, 60, 80 like that. Okay. And in every 80 milliseconds, there will be a new transmission of SIP 1. So, in the time domain, SIP is transmitted in SFN 0, SF5 and slot 1. Now, you can map exactly what it is. SFN 0 is every 0th radio frame. Okay. SF5, subframe 5. In the SF5, the second slot. So, slot number 1 means second slot. 0 means pulse slot. 1 means second slot.
So, this all numbering starts from 0. So, if I say SFN 0 means the first SFN. Okay. This uses a channel BCH, DLSCH and PDSCH. So, in the MIB, you would have seen the channel is being used by MIB is BCH and then BCH. But this uses DLSCH as transport. And MIB uses PBCH for physical, but this uses PDSCH as part of physical channel. So, these are some important parameters inside SIP 1. PLMN identity. This is a global identity of a cell. It identifies the operator globally.
It is combination of MCC and MNC. So, MCC is mobile country code and MNC is mobile network code. Then, it has the tracking area code. It identifies the tracking area for paging the users. So, it has to know the tracking area of the user. The cell is having a tracking area for each of the users. In the cell identity, it identifies the cell within a PLMN. So, it should not be confused with the PCI. Physical cell identity is different and this is different. So, inside one PLMN, inside one PLMN area, this is unique, the cell identity.
Then, cell barred, whether a cell is barred or not. So, if the cell is barred, then obviously, the UE cannot latch to that cell. If it is not barred, then it has to, I mean, it is available to be used. Then, it will go on decoding the next parameter. Then, the Pmax, maximum power value applicable for the cell. Frequency band indicator, operating frequency band of the cell. It gives what all bands are supported, the frequency bands of the cell. Then, the SI periodicity. SI periodicity means system information periodicity.
So, as we discussed that SIP1 is having periodicity of the other SIPs. It contains the information of the other SIPs. That is the periodicity of other system information block is contained by the SIP1. So, this is the diagram, which we already discussed. Let us try to understand it with the diagram. So, this is a MIB. Okay. So, you can see here, in SFN 0, we have scheduled one MIB. Then, 0, 1, 2 and 3. So, for the 4 millisecond, it will be, sorry, it is 40 millisecond.
It will be same as original. Okay. This SIP will be transmitted here, here, here. And again, after 40 milliseconds, it will be transmitted a new one. Okay. Again, the 40 millisecond, it will remain same. And again, the new one. So, this is how the periodicity of master information block. Okay. Now, if you remember that what we discussed in the last slide, similarly, SIP 1 in SFN 0 will be original. And it will be repeated in every 20 milliseconds. Okay. Not in the 10 milliseconds. So, 20, 20, 20.
So, 80 milliseconds. After 80 milliseconds, it will again transmitted as original. Original means the new transmission will happen. Again, it will be repeated. Okay. And the original transmission will happen here. Next is system information block 2, that is SIP 2. This is also a mandatory SIP in LTE. So, SIP 2 carries radio resource configuration information, which is common for all UVs. So, this is also, this contains all the channel information, the radio resource configuration. But it will be common for all the UVs. So, for doing the common signaling, it has to use this.
Okay. So, common signaling means the next signal, whatever will happen after SIP, then it has to use these parameters only. Okay. So, SIP 2 information provides following information to the UV. Random access channel related parameters. So, the procedure which comes after deducing SIP information is the random access. For RATS related parameters, you should know. Then that's the reason RATS related parameters are included in SIP2. Then idle mode paging configurations, that is also common for all UVs. Then PU-CCH and PU-SCH configuration, so physical uplink control channel and the shared channel configuration it will be having.
Then physical downlink shared channel configuration it will be having. Uplink power control parameters and UV timers. So there are various timers this SIP2 will carry, other SIPs. So next is SIP3. So SIP3 contains common parameters for intrafrequency, interfrequency and inter-RAT cell reselection. So it is having cell reselection parameters, but whatever common in all the, so intrafrequency means same frequency, only the cell will change, but the same frequency. So let's say one is having ERFCN of X, then another cell is also having ERFCN of X, but UV is moving from cell 1 to cell 2, then that is called intrafrequency.
But if cell 1 and cell 2 both are having different frequencies, then that is called interfrequency. And then inter-RAT, inter-RAT means radio access technology, inter-radio access technology. So RAT means LTEs is 1RAT, 5G is 1RAT, 3G, UMTS is 1RAT, GSM is 1RAT, so U-Tron, U-Tron. So this kind of radio access technologies are there. So inter-RAT, so let's say I am falling back from 4G to 3G, that is also a handover, but that is called inter-RAT. So this guy SIP3 is having common parameters for all the cell reselections.
Then SIP4, it will be having cell reselection parameters only for intrafrequency. Okay, SIP5 is having cell reselection parameters only for interfrequency. Okay, then SIP6 is having cell reselection parameters for inter-RAT, U-TRA. Okay, inter-RAT, U-TRA. SIP7 is having cell reselection parameters for inter-RAT, G-RAN. Okay, so SIP6, 7, and 8, all three are having inter-RAT, but SIP6 is having U-TRA inter-RAT parameters. SIP7 is having inter-RAT, G-RAN, and SIP8 is having inter-RAT, C-DMA. SIP9, it has information of home eNodeB, which helps the subscriber to choose the correct CSG.
So there are, you know, close subscriber groups, identity, when you do manual selection, then each eNodeB is having a group called CSG, close subscriber groups. So this SIP9 is having information of the CSG's identity. Okay, then SIP10, SIP10 is, this all three SIPs, 10, 11, and 12, these are the notifications, you know, to provide some notifications to your phone. So let's say there are some earthquake or tsunami ongoing, or it is, you know, about to come, so the system is detected, and then it will transmit a SIP10 information with the primary notification for earthquake and the tsunami.
Similarly, SIP11 will also be having earthquake and tsunami warning, but it will be having secondary notification. And then commercial mobile alert system, that is called CMAS, SIP12 will be having a notification of CMAS. So this is a commercial mobile alert system. So any alert, you know, which is commercially available, then it has to be transmitted to all the UEs using SIP12. So that is it from today's session. So we'll summarize quickly. So, you know, just to map the positioning of which messages, its signals, we just recalled the frame structures and the resource block.
Then we discussed about primary synchronization signal and secondary synchronization signal. As part of this, we discussed about how it helps in detecting the radio frame boundary, detecting the SAFs, the time slots, and how it helps in decoding the PCI, the physical cell identity. So both combinedly gives the information of the PCI. Then we discussed about the positioning in the time slot and in the frequency slot where this PSS and SSS are positioned. So these are the fixed positioning, whatever we discussed today. So in PSS, in time slot also, we discussed that in which slot, in which PSS and SSS goes.
Then we discussed about MIB. We discussed the content of the MIB, what all contents are there in the MIB, important contents like system bandwidth and SFN. Then we discussed about the periodicity of the MIB and the positioning of the MIB, that how frequent it is transmitted and where exactly in the time domain it is positioned. Then we discussed about SIEB1. We discussed about SIEB1 periodicity. We discussed about SIEB1 positioning. And then we discussed about the content of the SIEB1, which is having cell access related parameters.
And we discussed about the important contents, whatever transmitted as part of SIEB1. Then we discussed about other SIEB2, where in SIEB2, we discussed about the common UE's configurations are transmitted. Then SIEB3, 4, 5, 6, 7, 8, all are having cell reselection parameters. Then 10, 11, 12 are having notifications for tsunami and sea mass alert. That is it from today's session. Thank you. Thank you.