← Course overviewFree lesson 1 of 3 · lesson 1 of 52Next lesson →

Unlock all 52 lessons of Network Planning for Cellular and WiFi SystemsFull course ₹40,000 · paid

Price & syllabus
Free lesson · 28 min · no payment

Evolution of Cellular Networks from 1G to 4G LTE

A free lesson from Skill-Lync's Network Planning for Cellular and WiFi Systems course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Network Planning for Cellular and WiFi Systems lesson?

The instructor introduces the course, then explains brownfield versus greenfield deployment and the access and core parts of a cellular network. The lesson steps through 1G to 4G, with stated data rates, and shows how ITU IMT-Advanced targets led to LTE-Advanced being chosen over WiMAX.

  • Brownfield versus greenfield deployments
  • Access network versus core network
  • Why each generation from 1G to 4G arose
  • IMT-Advanced targets met by LTE-Advanced

What comes after lesson 1?

The next free lesson is lesson 2, “5G Key Changes, dB and dBm, and Network QoS Metrics” (34 min). Later in Skill-Lync's Network Planning for Cellular and WiFi Systems course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 52 lessons (25 h 45 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello, everyone. Welcome to this course on Network Planning for Cellular and Wi-Fi Systems. This is your first week's lecture where we'll be giving you an introduction to the telecom industry in general. So this is part one. There is a part two to it. So overall, you know, this course at a high level targets to teach you the network planning principles that are involved in laying the foundation or upgrading some existing cellular networks. So when we say cellular networks, it's generally a means of, you know, people trying to talk to each other, but cellular network is one framework on that.

But we're going to also extrapolate it to Wi-Fi networks as well. But most generic framework would be cellular networks. Yeah, so the fundamental skill set that you'll gain out of this course would be the network planning. You will understand what that means, and then we'll slowly get into the advanced concepts as well. But at first, you know, let's just start with an overview of how the industry looks like, and then we'll get into some fundamentals in the next few weeks. And then about fourth or fifth week, you know, we'll be getting into some advanced network planning concepts.

Yeah, so in this week, we're going to go over some of the evolution and what does network planning mean in general. By evolution, you know, we're going to talk about how the cellular industry has evolved. As you know, this particular week's lecture is primarily focused on cellular industry, and next week, we will focus on the Wi-Fi industry. That's, again, a totally different industry, although there are some similarities in terms of the concepts being used. But for this lecture, let's just stick to the cellular industry. So, therefore, we'll start from 1G, which is the first-generation cellular networks.

We'll see how it progresses towards 2G, 3G, and then finally, we're going to land in LTE. What does LTE mean, and where is 4G LTE standing as of today? So, that's somewhere we're going to pause and take a deep dive on that. And also, we're going to study what does really standardization mean when we say 4G or 5G? What do they actually mean? What do the specifications mean, and why they are important? So, that is something we're going to cover in the IMTA requirements section. And then, we also go towards a slight introduction to 5G, because 5G itself, that could be a whole course on itself.

But for now, we're going to just touch upon some of the aspects of 5G here, just to give you a sneak peek into that, so that you can just see how the industry has evolved and how it is looking like going forward. And also, in this same lecture, we're going to cover some of the cellular communication fundamentals, like linear logarithmic representation, what are the quality of service, which we call as QoS metrics, and KPIs. KPIs here refer to key parameter indices or indicators, key parameter indicators.

So, and QoS, we're also going to look at it at system-level parameters. There are several ways of looking at the quality of service, so we can also look at it from the system-level perspective. And then, we'll look at some of the sample metrics that are commonly used and how to evaluate them. And then, we're going to have an introduction to LTE architecture, the EUTRAN architecture, system architecture, the basic frame format, 5 channels, by 5 we mean the physical layer channels, timing diagram, resource grids, etc. Again, these are all LTE terminologies.

We're going to look at them and see what they mean. And then, some of the key definitions and QoS parameters, some KPI calculations. And also, we're going to, towards the end, we're going to get into some multi-antenna concepts. You know, again, multi-antenna is a theory in itself. You know, we have a separate course that talks about it in detail. But here, multi-antenna systems, we're going to see it from perspective of what does it add to the network? You know, or what does it add to your cellular system?

How does it improve the capacity? So, at a very high level, we're going to touch upon it rather than going into the details of it. And then, we'll immediately correlate it with what's existing in LTE as of today. How MIMO relates to LTE in today's standardization. Cooperative signaling and relays are another important piece in network planning. They just help you extend the network. So, we're going to review them as well. And overall, you know, we're going to review all these implications of the evolution of cellular industry on network planning.

So, this is what takes us into the network planning concepts. And then, we'll just look at some of the upcoming design exercises that we're going to see in the next few lectures. But for now, at this week's lecture, we're going to keep it a little light. Just keep it as a glancing tool to see what's upcoming. But then, the idea here is to introduce you to the industry overall, the telecom industry. So, that's how we'll summarize this week's lecture. A key learning objective would be evolution and network planning.

So, you will have a thorough understanding of how the industry has evolved. Again, there's not much of concepts here. But it's more like a story as how things started and how things are going now. And then, the next piece is the fundamentals of wireless communication, which is very – of cellular communication. Sorry. So, that's very critical. Introduction to LTE is another critical piece here. Multi-antennah systems. Again, the next two items, multi-antennah systems and cooperative signaling, they are like an add-ons to LTE. So, introduction to LTE will be the core of this lecture.

But these will be like add-ons to that. We're going to show how they add up to the existing architecture and how they enhance it or how they help you build the architecture further. Yeah. And we'll also look at some of the implications on network planning. So, with that being said, let's just get right into the main topic here, which is evolution of cellular networks and then what does network planning really mean. Okay. So, that's the technology that's evolving there. And now, you as a network planning engineer step in.

And then, you're trying to analyze how do we take advantage of the existing architecture. So, let's say you have some towers that are already existing there. How do we take it from there and then build upon it? Is it like should we fully destroy it and then start from zero or can we use this architecture and then go from there? So, that's how things evolve. So, especially in the cities, you know, there's always some sort of technology or metropolitan cities. You know, there's some sort of technology that's already there.

And the idea is to how do we enhance it so that it meets the user demands because as time grows, the user demand grows as well. And then, we need to upgrade the technology for that. So, brownfield is also important. And greenfield is typically a scenario that you would face when you go to deep rural areas where there is almost no connectivity and then you're bringing in connectivity there. So, yeah, here is just a formal definition of what I just described in the pictures. Okay. So, brownfield, again, refers to deployment in areas where there is some degree of connectivity that's already existing or preexisting.

This would include areas where there's an older generation of coverage. Example, 2G GSM is something that was there 10 years ago. It could still be there in some areas, but that might be eagerly looking forward to an upgrade to a 3G, 4G or even a 5G system. But greenfield deployments, on the other hand, can be expensive. Although it gives you the opportunity to lay a completely new technology, but it's expensive because there is no infrastructure such as towers. Okay. So, you might have to build them from scratch.

And also, the technology that you're deploying in a greenfield needs to be in a scalable way. It should not become outdated in a year or so. Then that's not good investment. Whereas brownfield, it's already there, and it's a little delta change that you're making. But then it has its own complications, such as interference management. Also, people might be latched on to a particular technology. So, let's say if they're already using 2G, then they could be having devices that are compatible with 2G network. And now, if you want to upgrade it to a 3G network, then their devices should also upgrade.

And that becomes a challenge sometimes. So, that's why, you know, it becomes a little hard there, you know, adding on a brownfield. You know, that becomes a little bit of a challenge there. So, one of the critical issues with the brownfield is the interference, which means there are existing cell towers that could be owned by a completely different company or a different operator that's operating on the service there. You could be a completely different company that is trying to add a new service. Now, the first thing that comes into picture is what's going on in the spectrum management side.

Who's using what part of the spectrum? And what is their coverage? You know, if their coverage is not overlapping with the new coverage that you're thinking of, then there is a possibility that you can share the spectrum. There could be areas, a small percentage of areas where there could be some sort of an overlap, and that could give you some degree of interference that need to be managed. So, it's not just spectrum management. It's also, you know, even if you share the same spectrum, sometimes there will be interference that need to be managed.

Cell coverage is another aspect, or the cell radius variation is something that you need to take into account because it changes with the technology. GSN could be offering a much larger radius of coverage, whereas a new technology like 5G could be much shorter, which means you need more towers there. And then this also gives you opportunities to bring in more signal processing and wireless communication concepts to use here, such as interference nulling or sectorization. So, these are all techniques that we'll study later, and we'll see how exactly they get used here.

And then there is a migration issues, core, a back-end mismatch, a compatibility with the user devices. Now, this second part, migration issue, is something I've shown in the diagram here. So, it'll be easier to understand once we understand this diagram. So, this is the cellular core network architecture. So, let me just describe the terms here, okay? So, when we say UE, that refers to a user equipment, okay? And in wireless industry, when you say UE, it's just your smartphones, okay? It's a user equipment. It's handheld equipment.

It could be an iPad, or it could be like a cell phone or a smartphone, but that should have some sort of a chipset in it. Like it should have a phone number associated with it. It should have some sort of a connectivity. So, that's what we call as a UE, okay? It's not a laptop or something that's just a smart device, okay? But it's more like a device that has a service. Like a cell phone service in it, okay? So that's what we call as UE going forward, stands for user equipment.

And then on the other side, the cell towers, that's something we call as base stations, okay? So they are like stations, they are located in a static location, unlike the UEs, they're not moving, they just located their static, and then they are trying to cover a certain set of UEs, okay? So they could have a radius or some square or some circle or some area of coverage that is defined by a certain shape. And all the UVs within that shape or coverage area belong to that base station, which means that base station is responsible for talking to those UVs and providing them service.

Again, multiple base stations can overlap here if their spectrum is properly managed. And again, there could be multiple base stations located to cover a large area. One base station might not be enough, so you'll have to deploy multiple towers or multiple base stations. They call it BS, which stands for base station. So we have them deployed all around that area. And then this part of the network, you know, where you have the base station to a UV connection, that's what we call as the access network, okay?

So when we say access network, this network helps the users access the internet or the service, okay? So that's what we call as access part of the network, okay? Which means that it's wireless, it's mobile, and it becomes a more challenging issue than the other side, which we call as the core side. So this is more of a wired infrastructure. All the base stations could be connected through each other to a common gateway where all the data is flowing through. And now this connection could be a fiber-based connection or a wireline connection.

Or sometimes there can also be a wireless connection between the base stations, but that's a special case. Anyway, so they all go through a serving gateway. So every base station has its serving gateway. We call it SGW, serving gateway. And then these gateways are then routed towards another block known as the packet data network gateway. This is also known as PGW. It's just organizing these packets, attaching the headers, you know, giving them the address as to where they have to be delivered or where they have received from, and then it puts them on the internet.

So once it puts them on the internet, then after that, they are sent in there, and then they have all these address details latched onto them, which will be routed accordingly. So that's the cellular network architecture. So again, the key terms here are core. When we say core, we talk about what's happening behind the base stations, how multiple base stations are connected. That's called the core architecture. And we say access architecture, it's the front end, which means how the base station interacts with the user. It's also called as the RAN architecture, radio access network architecture.

So the keyword here is access, and the keyword on this side is core. Okay. We'll come back to them again. We'll be using them again, and again we'll see what they mean and what the implications are. But again, coming back from the definitions to our brownfield deployment scenario, when we say migration issues, the issues could be in the front end mismatch or the back end mismatch. So it could be compatibility with the user devices. This is called the access mismatch. The base station could have a technology that the UE might not be ready for, and then there could be a mismatch.

So they cannot establish a connection. And when you put a new base station, it need not be compatible with the existing core architecture. The core is designed for a certain technology. When you put a 5G base station, the core is not ready yet. So you might have to lay a completely new core there. So that becomes the two type of migration issues, which we'll look at later. But anyway, let's pause there on network planning. So in the last few slides, we just saw brownfield versus greenfield deployments and how network planning comes into picture and how these terminologies are used here.

We still haven't formally defined network planning, but we saw just some of the basic definitions, okay? Now, with that in mind, let's just step, you know, and do a deep dive on evolution assets. Let's see what has happened in the past, like 20 years back or 30 years back, and see how things have evolved since then. And then we'll come back to network planning, okay? So I'm going to do a good segue here and then get into evolution and start from the older generation systems, okay?

So when it comes to the evolution, in the beginning, you know, there was – it was more of an analog system. Nowadays, it's all digital, you know, it's all being processed in bits. But in those days, it was circuit-based, which means it was a circuit with resistors, capacitors, inductors. You know, it was an analog system where you had an analog signal. Your voice was treated as an analog signal, and then it was transmitted as an analog signal. The problem with analog system is that it has poor quality, which means, as you remember, you know, any analog speakers that were being used back in the days were a bit noisy, and there was some degree of distortion in it.

There's always noise – there's some sort of a background noise there, so which brings down the quality. And the battery life is low. It has limited bandwidth. It can only take speech signals. It cannot take any high-bandwidth signals, such as images or text messages or some sort of video. All those things were not available back then. So this I'm talking about somewhere in the early – late 80s, actually. So late 80s, where this type of technology was available, or in the early 90s. And also, the equipment size was really large.

It was not so portable. Hard to carry it along. No SMS, no roaming, or no any type of security was provided, because anybody could tune into the frequency and listen. It was more like a walkie-talkie type of a connection. And the data rates were very small, up to 2.4 kbps. See, again, we're seeing bits per second here, although it's an analog system, but there is some degree of digitization that happens inside it. So that's why we have – it's set in kbps, kilobits per second. But it is majorly an analog system.

And then it's voice communication only, no data. So that's the first-generation device. And this is how the devices look like. And there is some degree of change here from this to this. And why was this evolution necessary from 1G to 2G? Why couldn't we have just lived with a 1G system? The reason is because the capacity demand was growing. And people also wanted some sort of a non-real-time communication, which means they want to send out a text, not call anybody, and not to have – so that they need not have a live call.

And the device size reduction was another aspect that was pulling the industry to move from 1G to 2G. And then 2G was not a direct 2G. They had several versions, like 2G, 2.5G, and 2.75G. But the main idea in 2G is bringing in the digital switching system, which means it will still have low data rates, but it can offer some degree of mobility, limited bandwidth. But then the data rates can still go up to 64 kbps, okay? And also changing the frequency. 1G had a certain megahertz, which is at a very low frequency band.

Moving it to 2G brings down the antenna size. We will see why the antenna size comes down in a different lecture. But the idea of increasing the frequency actually brings down the antenna size. As a result, your device becomes more smaller in size. It's much more portable now. And, yeah, as I said, you know, capacity crunch is a major driver here. That drives the growth. And it's also bringing in more intimate ways to communicate with people rather than just voice. So, again, this I'm talking about going from 2G to 3G, okay?

So, when we see growing capacity demand, as 2G became more usable with smaller devices and with faster data rates and with text messaging services, more people started using it. And as a result, the capacity was growing further. So, there's still a capacity crunch. And not just that, people also wanted much more better ways to connect with their friends and family. So, as a result, you know, they started preferring video calling or a multimedia type of communication, sharing the pictures among the phones. So, that became a necessity.

And then, as a result, the industry had to evolve. And the cell phones were also evolved to meet those type of needs. And then, accordingly, the industry, the seller industry should also evolve. The 3G came into the market around late 2000s. It offered 144 kbps to 2 mbps of throughput. There was mobile web browsing that was available in early 2000s. Video conferencing was possible. Multimedia file transfer was possible. Now, why can't we just live with 3G? And what helps us to, what is driving us to move towards 4G or LTE, as we call it, long-term evolution?

So, LTE here stands for long-term evolution. So, it's a third-generation standard, which is a small extension of 3G standard. We call it 3GPP sometimes. But the main idea here is to increase the capacity and speed of a network, both from RAN and core point of view. So, now, when I say RAN point of view, core point of view, understand what that means. So, RAN is this front-end type. So, you're also changing, making some changes and giving some standards here as to how these devices need to be designed.

And also, on the core side, you are making some changes here. Such that, you know, you have a compatibility with the new access that you are proposing. Okay. This is also called as a flat network architecture, which means you have multiple base stations connected to a single core. Now, you can have it in such a way that two base stations connected to one core, and then these two connected to another core. And then those two cores could be connected by a much higher layer. So, either way, you know, this is just one example of a flat network architecture.

But, you know, coming back to the LTE idea here. So, LTE provides you or specifies what type of technology you need to use. So, when we go from UE to the base station, when the UE is sending data to the base station, we call it as uplink. And when the base station is sending data to UE, it's called as downlink. So, LTE proposes using OFDMA in downlink and SEFDMA in uplink. So, again, this was developed by a group that was formed known as a 3GPP third generation partnerships project.

So, they said, Two releases just like how 2G had 2.5 and 2.75. This has several releases and it had like about a release eight or nine releases and anything beyond nine, 9.5 is generally marketed as 4G. As of today, there is a release of 12. It has been evolving even after 4G was released. But yeah, that's what a release means. It's just a variation of 3G to 4G. At some point, you know, they started marketing it as 4G. Now, that brings us to 4G. Where are we with the fourth generation cellular communication standard, which actually offers 10 times more data rate than the traditional 3G services?

Again, to get to this point here is majorly, the major driver is the number of users because we already have done the best. You know, there's video calling. We cannot do anything more than that. That's the best way to connect with each other as of today. But then there are more users in a per square meter areas, right? So as a result of that, you know, the communication becomes more and more dense and then more capacity needs to be designed, especially in the backhaul, which carries all this data load in it.

So, yeah, so that's where 4G came into picture. But a quick history on how that comes into picture. What is the process of bringing in this new generation or 4G or 5G or 6G? Whenever you come with a new generation, what is the process there? So that's why I put this block diagram here to explain you, you know, to give you an overview or a perspective of what that process looks like. So there is a body called ITUR, International Telecommunication Unit, so for regulation. So this gives you a set of standards, okay?

It's called IMT Advanced, okay? So everybody has to meet the standard. Now, what the standard says is it will tell you that, you know, this is the data rate this new generation has to meet or this is the latency that it has to meet. So it's basically a set of specifications for a particular generation. So for 4G, you know, there could be a list. For 5G, there could be another list. Now, multiple standards compete for this. So multiple bodies work on standards. So ITURPLY, people in ITURPLY get together.

They worked on this standard known as 802.16M, which is also known as WiMAX. And then the 3GPP group worked on the standard known as LTEA as an evolution of 3GPP. And then the Chinese mobile industry, they have worked on this another standard, CMI, and then they proposed it. So they all competed for this type of TDLTE is another standard, okay? So all these standards compete for this specification saying that, hey, we do meet the spec. You know, why don't you make us the standard? And, again, 802.16 IEEE folks, you know, they say that they also meet the standards.

So, similarly, everybody competes, and then this body here makes a judgment call on that as to say which one is the most closely meeting these standards, okay? So it seems like LTEA won this competition, and as a result, we have 4G LTE. So that's how the standardization happens. Multiple bodies compete, and then one of them wins, which closely meets these specifications. Now, let's take a look at the specifications and see how the LTE standard actually met them, okay? So I have a table here that summarizes these specifications.

The peak data rate, as you can see here, is given for both uplink and downlink. And also, there is an antenna configuration. If you use an 8x8 MIMO antenna configuration, the LTE release 8, which is before 4G, which is 3G or 3.5G, offers 300 Mbps, okay? LTE advanced offers 1 Gbps, whereas the target that was set was 1 Gbps. So, clearly, LTE advanced wins this, and then that was allowed, okay? Similarly, the peak spectrum efficiency. Spectrum efficiency stands for, you know, number of bits, so bits per second per hertz that can be transmitted.

It defines the quality or the capacity of a channel or some sort of an efficiency of how much bits you can pack in a particular bandwidth. Again, that is specified for downlink and uplink. In the downlink, you know, the max you can do is you can use 8x, again, these are all max configurations, okay? Whereas in an uplink, you can do the best is 4x4. And as you can see, the best was the target set by IMT were 15 Mbps here, sorry, 15 bits per second per hertz.

And this was 6 Bps per hertz, 6.75 Bps per hertz. LTE release 8 did not meet them, although one of them was already matching. This one was, like, way too high. Whereas if you see LTE advanced, it really easily beats these numbers. It just gives you double than what was specified and 15, even more on the uplink side. So this is how, you know, you need to compete with the IMT advanced and then, you know, make sure that you are at least meeting or even crossing their limits that are set.

Similarly, the capacity is how much service a cell can provide. So when I say a cell, I refer to a base station, BS, or a cell tower. So here, this is a capacity per cell. So, again, in downlink, if you use 2x2 MIMO, it was already providing 1.69. So there was no addition that was there. Now, this is more like an improvement from release 8. Similarly, for all these configurations, there was slight improvement, both for downlink and uplink. Again, cell edge user throughput. This is another metric, which is given how much capacity can a cell serve a single user, okay?

Now, the difference between this and this is that this one is the total capacity of the cell, and the one below is the service that a cell can provide to a single user. But, again, there is a condition that what if the user is at the cell edge? Now, why do we have to differentiate this? Because cells can be designed in a way that it's very good at the center and not at the end. That is not a good standard because a cell needs to have its capacity distributed evenly across the entire cell.

So that's why, you know, we take the cell edge user throughput as a worst-case scenario. You know, if the cell can provide a particular throughput for the user at the cell edge, then it can do much better in the center of the cell. So that's the idea of relying on this metric known as the cell edge throughput. So, yeah, cell edge throughput really defines, you know, the throughput numbers that the standard has to meet for a certain antenna configurations. And so LTE release 8 was at these numbers.

So it was offering 0.05, 0.06, 0.8 for the downlink. And as you can see, there is a slight improvement. It's not too much of an improvement. But, again, note that this is a small metric, okay? This metric would translate to a bigger number, okay? When you multiply it to thousands of users, then this would translate to a bigger number. And then there could be a bigger difference within these two numbers, okay? So just don't underestimate them as being small numbers and they're very relevant. We'll see once you map it to the number of users or when you take the population of that place into account, then you can see these numbers will have huge implications on what kind of service is being provided.

And also, it's also specified for uplink and downlink separately. So, and LTE Advanced crosses those standards here. Again, this is just an example of IMT Advanced standards that were laid down for a 4G system and how LTE Advanced met them all. So that's just a table of comparison that gives you a quick sneak peek of how things are being laid out and how standards are being selected. So far in this session, we have seen the evolution of cellular networks. As I said before, you know, in this particular week's lecture, we'll keep it focused to cellular networks.

And later on, you know, in the upcoming lectures, we'll get on to the Wi-Fi-based evolution. But so far, we have seen the cellular network evolve from first-generation phones, 2G, 3G, 4G. Of course, there is more 5G and other things that we'll continue in the next session. But for this session, we have seen what it means by cellular standards, how they have evolved and how these metrics that you're seeing on the screen right now are put together and what are different bodies that are involved in this and how several decisions are made on certain throughput or certain quality metrics that need to be achieved.

So we have seen all those things, especially the evolution and cellular networks up to 4G. And in the next session, we'll continue with the evolution from 5G.

Want the rest of Network Planning for Cellular and WiFi Systems?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Network Planning for Cellular and WiFi Systems course

The remaining 49 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Network Planning for Cellular and WiFi Systems course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.